Search results

  1. DogVomit

    Creaking when brakes are applied?

    Are you sure it isn't the rubber boot at the floor board, creaking when the brakes are applied? Try this. start the stang so it builds pressure. Turn it off, open the door and get down by the floor-board and press the pedal down with your hand. Listen for the location of the sound.
  2. DogVomit

    Synthetic advantages.

    Isn't this the case with GT's/Cobras? OOPS, I put GT's and Cobra's in the same sentence... :rlaugh:
  3. DogVomit

    2000 GT blowing coolant out of tail pipes

    If coolant is being lost through your exhaust, it'll show up as low in your radiator/resorvoir. Check your coolant level and run it around till your temp comes up to operating temp. Let it cool down completely and check your coolant level. If coolant is leaking, your coolant level MUST...
  4. DogVomit

    ? regarding X pipe

    Hey Whitepony04, thanks for the post. I have the same questions. I want my stang to purrr nicely and roar at WOT. But I don't want it to piss me off on long hauls, or piss off my girl. I certainly don't want O/R catless. Stinking up the world is for track cars. Question; Is there a weld...
  5. DogVomit

    S/C'd plug and gap.

    The NGK's were sounding good for a while there. I really want a plug that's durable. I don't want to be changing plugs at every oil change, that's for sure.
  6. DogVomit

    Synthetic advantages.

    One lady in my office just had her VW Beetle motor seize. VW quoted her 10 thousand bucks. She's been taking her car to Jiffy Lube and because they used conventional motor oil instead of synthetic, VW won't cover her motor under powertrain. They say that the regular oil totally gummed up the...
  7. DogVomit

    S/C'd plug and gap.

    NGK's sound like the plugs I need. I'll (so far) gap them at .035. Thanks.
  8. DogVomit

    S/C'd plug and gap.

    Which brand plugs do you blown guys use? I'd also like to know what gap you use. Once I have an average, that's my gap.
  9. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Thanks guys. Your input has put my mind at ease alot. After I know I have a great tune, I'll start with the bolt-ons. I'll contact the shop to get my A/F info. for Mike Ancheta at Vortech. I let him know that I wasn't impressed with my numbers, compared to what Vortech advertises for a...
  10. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Stick. Five speed. From here. I start with changing the plugs. After that, I'm burried in about 5k credit card bills. That's why I need you guys to throw your ideas at me on this 2003 GT, 4.6 2v. I'm so financially screwed now, and such a short dick on the ruler! My brown eye's have turned...
  11. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Actually, it's running fine. It starts and idles smoothly. It accelerates smoothly, steady, with no hesitation. It ingine brakes (under compression) very smoothly. The blower is very quiet, just a slight whistle at idle and up to maybe 1500 rpm's. It's only slightly audible in 1st and...
  12. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Thanks Streetstang. It was your post that made me realize that my Vortech install isn't a par. I appreciate your honesty.
  13. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Derek, Thanks. The shop is awesome. The installer is dead nuts accurate and the tuner has a stang IN THAT garage that's this car http://www.ramseysperformance.com/gallery.htm Maybe I should go back to the shop and tell them to retune. But sheet, I'm affraid of watching my stang go BOOM on...
  14. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    None of the above superhereaux. No previous dyno's. No previous track times.
  15. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Thanks for the pat on the back. I owe you one, man. Yeah, It's somewhat better. It doesn't have the aftercooler on it. I blamed it on not having enough cash. But crap man, shouldn't I have at least hit 375rwhp? If Vortech claims to increase HP 100-104, if the basic '03 stang 2v 4.6 has...
  16. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Anyone have ideas why my stang stunk? Please... WTF? Anyone with some wisdom to share? Anyone with a Vortech? I can tell, I'm beating a dead horse. DAMN!
  17. DogVomit

    Factory "Panic" as a No Cost Alarm System?

    Personally...:mad: I'd like something that looks like a 20 barrel shotgun that points ALL OVER THE inside of the car. It should come with a little blinking LCD that displays... "FUHHGETABOUDIT, Dont' press the clutch!" But that's me. If I can't have my stang, nobody gets it.
  18. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Sorry it took a while to upload. I had to reduce it in size. But thanks for looking, man. I'm so pissed, my eyes are yellow. FRACK!
  19. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Guys, Sorry. I suck at this. I tried to upload the dyno for you to see. It's not there. Vortech is looking into this but, I'm out a few bucks right now, so not a real freaking happy camper, if you dig. Okay... I figured ONE thing out... How to show all the guys with stangs LOW...
  20. DogVomit

    Dyno's after Vortech install - 03 4.6 2v

    Had my SQ installed, along with Superchip. My stang is STOCK. It only has flowmaster weld ins. I'm not a very happy camper and talking to a guy at Vortech about this. With thier reputaion, I hope they will help to get me where I should be. Suggestions?
Top Bottom
Back
Forums
Menu