Search results

  1. C

    dad has worries about UD pullies

    Get them, I have had Steeda UDP for years on several different 99+ GT's and never had a problem.
  2. C

    Motive Gears Good or Bad ?

    Ford gears are the best way to go. Do a search.
  3. C

    Hi All! New Pony Owner! First-Time Poster... Need Some Suggestions.

    FMS gears (410's) and a quality exhaust first. They both will make you smile. Lose the tailights. :)
  4. C

    Vibration problems

    Where can you buy the hubcentric rings? Thanks.
  5. C

    Vibration problems

    The rims are 17 inch with the correct size Goodyears on them. I thought about the rotors but the brake pedal doesn't pulsate when applied. I have checked the tire pressure alot. I may try another driveshaft?
  6. C

    Vibration problems

    I bought my 01 GT used recently and it came with afternarket Eagle alloy rims with new tires. I noticed almost immediately that the steering wheel would shimmy back and forth roughly between 45 mph and 55 mph. The gear shifter does the same thing. It seems that it moves faster and slower with...
  7. C

    Question about 2004 GT

    I say keep the cobra R's. The bullets are a dime a dozen. In the long run I think real cobra R's are more expemsive to buy than a set of bullets. I think you might be saving money with better looks. This is only my opinion though.
  8. C

    Finally got my Aluminum Driveshaft , it's on but I have a question !

    Don't be fooled by the 6.3 weight reduction. We are talking about rotating mass, which is much greater than just dead weight. This can be a worthwhile mod for more than one reason.
  9. C

    steeda underdrive pulleys worth it?

    They have been a proven good mod time and time again. Put them on for a little more power. If your stock I say the the lca's can wait. I could run 2.0 60's with street tires 410's and some bolt ons. Take the free extra power.
  10. C

    Mach/Bullitt pedal install

    I went to the FFW in Gainesville today and had a really good time. I bought some new Ford mach/bullitt pedal covers there. I spent only 5 minutes trying to put the clutch one on, after removing the factory rubber one. It did not work out very well. Is there a trick for a smooth installation...
  11. C

    91 GT 5.0 vs 97 z28 LT1

    Race him and find out. I think you will lose, sorry. The 97 I believe actually has 285 hp compared to the previous lt's. My ex-girlfriend had one, and I used to beat on it all the time. I actually had a 91 5.0 lx hatch at the time. The Z felt faster, if that means anything. On the bright...
  12. C

    Melbourne area stangs

    Hey Glenn, I did not forget about you. Can you please PM me your cell number? I had it saved on my voice mail which was deleted. Thanks. Chuck
  13. C

    Where to get decent gears for a 8.8 rear end?

    Ditto on the above.
  14. C

    Quarter Window removal, Molding, Effects brackets?

    Steeda has them in there newer catalog for 99 dollars I think. I also saw them somewhere else, I believe it was Dugan for about the same price. I am thinking about giving them a try. I repainted my door trim, now the 1/4 moldings really look like crap.
  15. C

    HELP 3G ALTERNATOR INSTALL....PLEASE HELP, PLEASE HELP

    I just learned this by doing my 3G upgrade last week. You do not use the orginal 10G wire at all, just leave it attatched to the plug and cut white and black wire for the small plug. When you use 4G wire w/fuse you defeat its purpose with the 10G wire hooked to the alternator also. It serves...
  16. C

    Quoted 2,500 for a full engine rebuild!

    Hopefully it is just a lifter, big difference in price!
  17. C

    Motor mount change

    If your still using the stock fan look at the bottom of it. If you have the original mounts on our cars the fan is probably about to hit the bottom of the shroud or it already has. The stock rubber mounts break down. Even if you have an electric fan it would be a good idea to change the...
  18. C

    3G question?

    The 3G alternator is in! It works great. Thanks for the help guys.
  19. C

    3G question?

    Or should I just put in a 125 amp fuse in the 4 GA wire? I am actually working on the car right now.
  20. C

    3G question?

    Thanks. Allright I won't use the 2 orange and black wires. Can I just leave them attatched to the big plug that won't be used? I already looked at those 3 sites and they gave me good tips, but I still don't know how to use the 12 gauge fuselink wire with the 4 gauge wire?
Top Bottom
Back
Forums
Menu