Search results

  1. montyd

    UPR K Member Motor Mount Slots. Which One SBF

    if i remember right the stock motor mount has a locator nub on it that makes you put it in the front slot i had to grind one of the nubs off to get it all the way down in the mount but im 99 percent positive it usea the front(closest to the radiator) slot oh and i put mac long tubeson when i...
  2. montyd

    93 cobra crate motor more info

    ok so we hooked the scanner up and with the motor off key on it pulled code 85, wit the key on and the motor running it pulled code 41 and 91, starting to think the 02 sensor is bad and causing the lean condition on the left bank any thoughts?
  3. montyd

    x or h-pipe?

    i have had both my car has a 2.5 x and slp loudmouths on it and it is really loud and sounds like a nascar, but sounds good and get quiet enough to hear the radio when cruising another thing to consider is the mac pro chamber its the bet of both if you ask me im thinking of going that route...
  4. montyd

    BIG AND WIDE

    anyone know the right offset and backspacing ? id like to run a 315 also
  5. montyd

    Need Header Advice

    every test i have seen shortie vs long tubes the hp difference is very minimal like 5 hp or something u will hear more of your cam if you have ong tubes in my experience but shorties are way easier to install just my .02
  6. montyd

    new ford 93 cobra crate motor help!!!!

    ok got the intake back on and drove it tming is still at 12 degrees if you stan on the gas or go wide open throtle it falls om ats face and pops into the intake but half throttle it runs fine so i gave it more fuel now its at 45 lbs of fuel prssure with the vacuum line off leftte guage on...
  7. montyd

    new ford 93 cobra crate motor help!!!!

    i have been thinking that this is my brothers car and i have been telling him that also will try and continue to convince him lol thanks
  8. montyd

    new ford 93 cobra crate motor help!!!!

    here is one other thing im wondering could it be a bad computer? this car sat for almost seven years and along in there it had a gt40 crate motor in it for bout ten miles(it blew up in less then twenty miles litterally) and then sat with no motor for another year just a thought i had about the...
  9. montyd

    Mac header install nightmare

    sounds to me like the motor mounts are bad and that why your headers are hitting the k memeber. have seen the problem a couple times i will say the easiest install i have ever done with long tubes was with a tubular k but you dont have to have one to clear them
  10. montyd

    new ford 93 cobra crate motor help!!!!

    ok i would agree with you there the pro m is the second or third mass air we have tried. my other car has a pro flow 24lb on it on there housing we swapped it onto this one thinking that was it and it still did it. the pro m is the second mass air we had a ford 24lb on there originally will...
  11. montyd

    new ford 93 cobra crate motor help!!!!

    this is a long block block from ford. it came with gt40 heads and crane 1.7 rockers, cam and timing gears and chain installed from the factory. we put an oil pump and pan in, valve covers and the trick flow intake(track heat intake) with a one inch spacer were taking the spacer out to clear...
  12. montyd

    new ford 93 cobra crate motor help!!!!

    the car does fire right up even after it sat for 2 months idles great even drives good other than the lack of power plugs are all tan and all the same
  13. montyd

    new ford 93 cobra crate motor help!!!!

    its running 40 lbs of pressure with the vacuum off the regulator has a 255lbper hour pump and adjustable regulator only at 12 degrees of timing and no codes
  14. montyd

    new ford 93 cobra crate motor help!!!!

    it has a pro flow 24lb mass air sensor and no codes with a a9p computer
  15. montyd

    new ford 93 cobra crate motor help!!!!

    it has a pro flow 24lb on a stock housing
  16. montyd

    new ford 93 cobra crate motor help!!!!

    ok guy im totally stumper. i have a 91 gt vert that i bought with no motor. it has an aod with a 2800 stall converter and shift kit,and 4:10 gears we got a 93 cobra long block right from the local ford dealer and it has no power. it wont even do a decent burn out. hears what it does, at 4k...
  17. montyd

    QA1 coilover, K-member suspension problems!!!

    i have the upr on my 93 ordered the kit with the coil overs and a arms and everyhting. only fitment issues i had were i had to grind off the tab on one motor mount. and i had to grind the motor mount ont he k to clear teh stearing rack. put a nice curve on it and no one will ever know. my...
  18. montyd

    how big of a cowl hood do i need?

    i have a one inch spacer for my cobra intake. wondering how big of a cowl hood i need to clear it.
  19. montyd

    upr k coil overs wheel rub?

    my struts are slotted. im not sure where i set them i will take it back apart tomorow and let you guys know. the k memeber itself is awsome everything lines up good just had to grind the tab off one engine mount.
  20. montyd

    upr k coil overs wheel rub?

    i have a 93 lx put a upr tubular k memeber in with there coil overs. i am finally almost ready to drive the car again. (rebuilt everything) i put my wheels on and pulled it out side and back in yesterday to clean and the fron wheels rub the coil overs so bad it took almost an 1/8 inch off my...
Top Bottom
Back
Forums
Menu