Search results

  1. 03TrueBlue

    6 disk changer wont eject cd's

    Are you using burned CD-Rs? I know with mine and my friends that when we use CD-Rs that they wont eject, it tries but fails. I have to use tweezers to get them out sometimes. I dont think there is a manual button but maybe disconnecting the battery for a while might reset it.
  2. 03TrueBlue

    Installing Pioneer Avic D3, speakers? Factory Amps?

    Yes you can mount a 6.5 in the doors without cutting. You have to make an adapter. I make mine out of 3/4 mdf board, medium density fiber board is the real name. just have to cut it out with a jig saw. You should be able to go to a local shop and they can make them for you. I had 7" mids in my...
  3. 03TrueBlue

    Installing Pioneer Avic D3, speakers? Factory Amps?

    I agree with red200gt. Best case is to rewire and run what you want. I personally dont like rear speakers and like to run a good front stage with a sub. there is not a good thing you can do with the Mach system except get rid of it. but thats just my opinion. if you want to replace the...
  4. 03TrueBlue

    Installing Pioneer Avic D3, speakers? Factory Amps?

    The stock system has horrible crossover issues. The mids have the low freqs and the tweeters the highs. The tweeters are powered off the stock deck amp and the woofers off the rear amps. The system really has mid range problems. I temporarily ran wires from my deck( alpine 9835) to the front...
  5. 03TrueBlue

    guess my hp

    598
  6. 03TrueBlue

    some new things

    Thats what im going with next time also. I have a old set mounted on 9" rims and I tried them on and I think it looks better
  7. 03TrueBlue

    2001 gt mach stereo sub & amp install

    That box holds the rear speakers. you can bolt to it just use short screws. I wouldnt just because its not a good idea to install amps upside down, its bad for heat .
  8. 03TrueBlue

    FINALLY! getting blower dyno #'s

    513hp for the 2 bucks. How much for the old block?:D
  9. 03TrueBlue

    Mach 460 Speak problem

    what they said. Might also be a blown tweeter. I use to have a sub the worked sometimes and it was the voice coil and when i would push on it a little it would work for a while. First thing I would do is pull the tweeter and check the connections if looks ok swap the tweeter with the other side...
  10. 03TrueBlue

    Quick Tire Question...

    When I had 9s on the rear I ran 275/40s. If i was you i would put the 275s on the front and get a pair of 315s for the back
  11. 03TrueBlue

    ScanGaugeII Anyone use one?

    Has anyone used these ScanGauges? They look kind of cool. I know they will display mileage, RPM, speed and things like that but what else will they tell me about fuel and spark. Seems like it might be handy if something is starting to go wrong and being able to see it before it turns on the...
  12. 03TrueBlue

    Door speakers don't work

    which door speakers? The woofers or tweeters? if the tweeters then sounds like the amp in the deck is bad. If the woofers I dont know. Might be a plug or a fuse having a problem.
  13. 03TrueBlue

    valve stem seal?

    I have always done the air method. Also if your seals are really bad when coming down on compression when you hit the gas it will throw out a puff of smoke.
  14. 03TrueBlue

    2002 GT for $4500

    I would get the 02 myself.
  15. 03TrueBlue

    Its Official

    Sounds like I got lucky at 3.95 for 93 yesterday.
  16. 03TrueBlue

    Changing to flows...

    I have stainless 40 deltaflows and love them. Not to loud untill you get on it then they scream. the drone isnt bad at all unless you lean forward or backward then its loud.
  17. 03TrueBlue

    Can you tune for mileage?

    I have been changing. driving on the freeway and not letting the engine go over 2000 rpms. Im getting between 24 and 25 now, 80% highway. But its hard not to get on it with the new flows.
  18. 03TrueBlue

    Can you tune for mileage?

    Can you use a tuner to get better mileage? Or would it just run it to lean and burn something up. Im thinking of getting a hand held tuner and would like to get better mileage during the work week and then put in a HP tune for the weekends. Also how much can someone expect from a tune in HP, is...
  19. 03TrueBlue

    Can you tune with a PDA?

    Is there software you can get to hookup a laptop and flash the ecu? That seems like the easiest thing to do.
  20. 03TrueBlue

    Auto to 5 speed conversion

    http://forums.stangnet.com/showthread.php?t=680462&highlight=auto+manual+swap
Top Bottom
Back
Forums
Menu