Search results

  1. deadly97snake

    test

    test
  2. deadly97snake

    Help FFW starts at 8am and its Midnight!

    You laughing at me? You making fun of me? You wanna fight? HUH? J/K :jester: I can't believe it either. I really thought I checked it though. I guess not. :doh: I'm glad it running better. I'm gonna put some miles on it before I decide to take it to the track. Just to make sure. :chair:
  3. deadly97snake

    Help FFW starts at 8am and its Midnight!

    Update Well I reset the computer today and I also found that the electrical connection that connects to the Mass air sensor was unplugged. I put it together and it seems to run fine. I hope that was it and I don't have t worry about it anymore, so I can finally try my nitrous kit that I've had...
  4. deadly97snake

    Am i chancing it by only retarding the ignition 2*

    What I mean about the car not running right at 6* is that it starts to idle up and down and doesn't settle in at any specific rpm. So you really think that running it at 43psi with the vacume off and 2* timing is the way to go when I run my 125hp dry kit? :shrug:
  5. deadly97snake

    Am i chancing it by only retarding the ignition 2*

    I want to run my zex kit at the 125hp level and Zex reccommends that I retard the timing 4*. My car won't run right at 6* timing so the best I can do is to retard it 2*. I know that before the nitrous I was running 14* fine. Since you have to retard it from the factory timing(10*) I was...
  6. deadly97snake

    Help with coolant leak from my Thermostat housing

    No I did a cobra intake install with 24# injectors, a C&L 76mm MAF, and a BBK 70mm TB and I have been having some bad problems since. I started the install on Monday and finished Friday night. My car hasn't been driving right since. I havn't figured out the problem yet...
  7. deadly97snake

    whats next mod?

    I say get a stroker kit like a 331 or a 347, port and polish the heads and intake a put some nitrous on that snake!
  8. deadly97snake

    Help with coolant leak from my Thermostat housing

    I just did my intake install and I have a small coolant leak right on the bottom part of my thermostat housing. I used the black high temp RTV sealent and a new gasket. I also torqued the bolts down to the reccomended specs given to me by the Haynes manual. I don't know why it is leaking but...
  9. deadly97snake

    Help FFW starts at 8am and its Midnight!

    This sounds like a logical explaination but the car was running great before the install and as soon as I finished the probelms started. I didn't take off any plug wires from the plugs during anytime of the install. So I don't know how that could've happened.
  10. deadly97snake

    I bought new wheels 18" X 9" chrome cobra's

    I have 265/35/18 all around with no issues what so ever. My car is also droped 1.5"
  11. deadly97snake

    Help FFW starts at 8am and its Midnight!

    Well since its raining I have a little more time. I jut took it for a ride and it is still hesitating. It seems like it does it while the engine is under stress. I was driving up a hill in a high gear at a low speed. (third gear at like 25mph) and it bucked really bad. Once I got to the top...
  12. deadly97snake

    Help FFW starts at 8am and its Midnight!

    I had the battery disconnected the whole time I did the install. I did pull the distributer and lost my position, but I messed with it by turning the distributer a little bit at a time until my car actually started. I then used a timing light and set it at 8*. If the light says 8* is it right...
  13. deadly97snake

    Help FFW starts at 8am and its Midnight!

    Alright its 1:14am and I just checked all the vacume lines and they are all secure. Also I just double checked my spark plug wires and they were all where they are supposed to be. Any other suggestions?
  14. deadly97snake

    Help FFW starts at 8am and its Midnight!

    I just installed a cobra intake, 76mm MAF, 24# injectors, and a 70mm Throttle Body. I was driving it from my parents house where I did the install and I am having problems. The main thing is the car is studdering/bucking. The is a loss of power when it does that. I do hear a high pitched...
  15. deadly97snake

    Having some problems with the cobra intake install

    ?
  16. deadly97snake

    Countdown to Fun Ford Weekend!

    Thanks :flag: I really hope it doesn't rain, in the last three weeks I bought a cobra intake, C&L 76mm MAF, BBK 70mm throttle body, and some drag radials just for FFW. One more question, if it rains on Saturday will they have the True Street Competion on Sunday?
  17. deadly97snake

    Having some problems with the cobra intake install

    Man you guys are awesome!!!!!!!! About the timing....Can I just use a timing light or will that not work cause the gears will be different from the distributer? Ok got the dirt question shouldn't be a problem execpt where can I get a magnetic oil plug? Thanks wytstang, I really do...
  18. deadly97snake

    Having some problems with the cobra intake install

    I tried that. I got almost all of it out but I know there is still some left. I can't do anymore. Will it hurt my engine?
  19. deadly97snake

    Having some problems with the cobra intake install

    Even some help with one of the questions would help from you guys
  20. deadly97snake

    Countdown to Fun Ford Weekend!

    If anybody sees my car come by and say hi. I will be running the tree street comp. The name is Mike BTW!
Top Bottom
Back
Forums
Menu