Search results

  1. damacman

    Those with Aftermarket Cam Covers on 99+ come in

    It absolutely would solve the problem. Problem is that the one used on the stock valve cover is shaped differently as the PCV valve is in a slightly different spot . . . I haven't had the chance to talk to BBK yet - maybe tomorrow.
  2. damacman

    31 Spline install problems...PLESE HELP!

    um . . . kay . . .
  3. damacman

    31 Spline install problems...PLESE HELP!

    If you checked axle lengths on your Mosers with respect to the stockers and the Mosers were 1/8" longer. . . you got the wrong axles. Hey, at least it's a relatively simple fix.
  4. damacman

    Those with Aftermarket Cam Covers on 99+ come in

    I would disagree that they are junk. The covers are nicely made, the gaskets worked extremely well - never had the slightest leak on either of mine - they just need some baffling.
  5. damacman

    Those with Aftermarket Cam Covers on 99+ come in

    Got the pass side cover off and the stock one back on this evening. They're a PITA to get the BBKs in or out - tighter than a nine year old nun . Now I'm waiting for the wife to come home so she can start the motor so I can do leak inspection, etc. More news later. Edit: OK, this solved...
  6. damacman

    Those with Aftermarket Cam Covers on 99+ come in

    Ever since I put the BBK cam covers on mine, it's REALLY gone through the oil. I checked the oil last week (the dipsticks on these cars SUCK btw . . . ) and it appeared on the LOW side. So, I put a full quart in. This was after I put a half quart in about 1,000 mi ago. [Mobile 1 5w20 syn]...
  7. damacman

    mid-lengths vs long tubes, any advantages?

    Mine were good for 4 tenths when it was n/a . . .
  8. damacman

    Belt installation on Procharger P1sc1?

    I think the Pro Charger compressor mounts as does the Vortech - pulley facing the motor. Mine is a PITA as well to get on - I have to have it up on ramps, get under the car with a pry bar and pry the tensioner from the bottom in an effort to get enough slack to get the belt on the alternator...
  9. damacman

    Welding Axle Tubes...

    I called a few shops in my neck of the woods and they all gave quotes - this is a pretty common mod to our cars. I had my axle tubes and torque boxes (upper and lower) all done at the same time. It cost me $250 - well worth it IMO.
  10. damacman

    Rented a Shelby GT-H!

    This last weekend via the Hertz location at the Boston Logan airport. I was duly impressed. If my car came stock with this much go, I'd be deep in the 11s with my mods . . . only thing that sucks is that the traction control disable button has been . . . disabled. Regardless, a lil' brake...
  11. damacman

    Oil Separator - Revisited

    This reservoir fills up 1/3 of the way in 15 miles. I'm beginning to think that the BBK cam covers are to blame as they lack any kind of baffling . . . Where's SVTTECH when you need him?
  12. damacman

    Oil Separator - Revisited

    OK, Within the last 1,000 miles or so (blower has been on about 3k miles now), I've noticed a puff of smoke on start up on occasion. Sometimes it lasts for only a second, others it lasts for a few seconds. I narrowed the problem down to the PCV system - but I'm not sure if what I've found...
  13. damacman

    2000 Mustang GT Rear Sway Bar Replacement Question>>>

    Check out this kit before making a purchase: Hotchkis Sway Bar Kit
  14. damacman

    Who has replaced their clutch in their driveway?

    your '04 uses an 11" clutch btw, so the King Cobra won't fit . . .
  15. damacman

    TPS Sensor can't be removed!!!

    Two suggestions: 1. Use a pair of good diagonal cutters. Come at the stuck screw head on (not perpindicular to it) and squeeze the cutters so that they bite right into the sides of the head at the center. While keeping the cutters pinched tightly, see if you can break the screw loose...
  16. damacman

    3.90 gears???

    too steep heh? 4.10s are the purr-fect gear for any centri set up as they let you get into the boost nice and quick. Of course, this is an issue with stock tires. I would concur that 4.10s are a little too steep with positive displacement blowers though . . .
  17. damacman

    Engine rattle

    was thinking that myself . . .
  18. damacman

    Clutch list of parts

    I'd buy an aftermarket pivot ball, like one from McLeod. Sure beats having to drop the tranny to replace a broken OEM one, like I just got done doing . . .
  19. damacman

    vt 1 install over weekend

    Just because you were unable to get the BBK cam covers on, doesn't make them junk. The drivers' side will go on if you loosen the brake booster so that you can move it out of the way about an inch. I've had mine on for several months now, no leaks.
  20. damacman

    NORTHEAST BOOST/ HIGH COMPRESSION GUYS BEWARE (others may be effected too)

    Experienced this today here in Chandler. I normally use Mobil gas, but filled up at an alternative station - thought it was because of that . . . hmmm . . .
Top Bottom
Back
Forums
Menu