Search results

  1. accidentprone86

    I think i fryed the batterie charger.

    so now that i put my system in i am having major charging problems (even worse then before). At night you only get two options. Headlights and heater or headlights and music. Anyway. I went to give my batt. a full charge and The positive and the ground wire on the batt. charger crossed...
  2. accidentprone86

    I need to install a deck in a 94 civic. How?

    So i told a friend of my'n I would intall her deck in her civic. I get the basic ideas of it but i need details and specifics so i dont end up wasting a bunch of time. Wat do i need to get to install it? Is there anything special about the civic i should know? I know for sure it is a DIN sized...
  3. accidentprone86

    help quick! how do i take my rear seat out?

    Hey guys i am installing my sterio stuff and i need to run wires under the rear seat in my coupe. how do i take it out? Thanks
  4. accidentprone86

    PIP Sensor?

    That is defiantly your pip sensor. I have had this problem many times. For some reason about every 6 months my'n goes out. It may be because i bought a remanufactured distributor and i have gone through three of them since last year. Anyway your problem is defiantly your pip sensor. I...
  5. accidentprone86

    Failed Emissions...Help.

    Ford actully has a recall of some sort for the cats on fox body stangs failing. you might want to look into that more.
  6. accidentprone86

    How hard to get 400 rwhp out of street 351w?

    I say your list with 12.:1 compression and you would be there
  7. accidentprone86

    Anyone that likes to makes thing Needs to see this site!

    http://www.emachineshop.com/ This is amazing! I downloaded the software, desinged a project and placed an order. It will be on my door step in about a month. You can do so many different things! Imagine all the possibilitys! Switch panels, dash plates, brackets, whatever; just desinge it...
  8. accidentprone86

    can you powder coat stainless steel?

    ^ I need to know for a project. Thank you.
  9. accidentprone86

    What size are the stock rear speakers in my coupe?

    thank you guys! I just looked around and depending on the way you measure the speaker You can say that a 5x7 speaker is the same size as an 6x8. This is at least the case for the infinitys I have been looking at.
  10. accidentprone86

    What is the service life of a Paxton supercharger?

    If it is an early sn- series that is ball driven, then you are definatly on borrowd time. The only copany that does rebuilds and that has the parts Is paridise wheels out of cali. For parts it is like 450$ and if you send them the head unit it is 700-750.
  11. accidentprone86

    What size are the stock rear speakers in my coupe?

    I need to know the size of the stock speakers in my 86 coupe. It has the premium sound package. I have a set of 5x7s to go in their but they dont look like they will fit.
  12. accidentprone86

    14* timing on 85 octane...

    It is the altitude in colorado that make it possible, not nearly as much air enters the motor. Hell I have even accidently sprayed my 125 shot on 87 octane, my motor took it just fine, no abnormal nosies or anything. When I Spray I run 14 advanced on race gas and 12 advanced on 91. You can get...
  13. accidentprone86

    does the aluminum drive shaft come with u joints?

    I need to replace the u-joints on my car, eveytime i get on the gas or shift they clunk togather. Things start to go south in the drive line when you launch on sticky tires at 5000 rpm spraying a 125 shot.:p What is the next weekest link after the drive shaft and u-joints? Thanks guys.:Word:
  14. accidentprone86

    traction lock rebuild ?'s

    It is a peice of cake!! The hard part is geting the "s" spring back in. I suggest rebuilding with the alternate stacking order if you plane on drag racing. Just make sure you shim it right. Also, with the bolt the holds the retainer shaft in, Make sure you heat it up a ton. my'n snaped on me...
  15. accidentprone86

    e6te < e7te = core???

    O yeah, revise your typing before you post!!
  16. accidentprone86

    e6te < e7te = core???

    No e6 heads are not the same as e7 castings. e7 heads flow better then the e6's. The e6 casting came on the 86 EFI mustangs. 87 ^ fox mustangs came with e7 castings. They will bolt right up in place of the e6 heads on your 86. If they are only 100 dollars and you are planning on changing the...
  17. accidentprone86

    What plugs for 125 shot or 7#s of boost??

    Thank you for your replys.
  18. accidentprone86

    What plugs for 125 shot or 7#s of boost??

    :shrug: seems like a simple question to me
  19. accidentprone86

    What plugs for 125 shot or 7#s of boost??

    What is the next heat range down from the stock plugs? Will running a colder plug gaped at .035 hurt N/A performance?
  20. accidentprone86

    Thunk sound from rear under load.

    It sounds almost like a snapping if I take off going up a hill. Also if I let off of the gas in first and second and let it cruse at idle it we jerk back and forth each time making the thunking sound.
Top Bottom
Back
Forums
Menu