Search results

  1. K

    Installing gears myself this weekend.

    By the way, thanks for the write up daver01. I will give you guys an update next week if I have time to start the job this weekend.
  2. K

    Installing gears myself this weekend.

    I have a dial indicator with magnetic base and a bearing separator and puller just for your information. The job is not that difficult it just requires some precision and a few hand tools that most people do not have. What I am really asking is if anyone knows of a manual or a write up that...
  3. K

    Installing gears myself this weekend.

    I am looking for write ups on gear installations. I have a pretty decent write up from a guy on superstallions.com. I also went and bought a Haynes manual today but it did not cover replacing the ring and pinion or disasembly of the rear end. Anyone know of a manual I can refer to or a good...
  4. K

    Hawk Pads. SQUEAKING?

    I have heard several guys complain about the hawk pads squealing. Bottom line is the pads contain metal in them and when metal rubs against metal they can produce a squeal. Your best bet at this point is to pull the wheel off and rough up the rotors with a gritty sand paper like a 100-200...
  5. K

    Anyone with 18 x 10.5" Rwheels?

    Mity2, your wheels look good on your car. Looking at your rear wheels it appears as if the 285 is a tight fit. I just ordered the same wheels with 295's out back. I sure hope they do not look to small. I wanted a 315's but your somewhat limited in a 18" diameter and the ones that I could...
  6. K

    LT's on lowered car

    No problems here. My front end sets about 26" front ground to bottom of the fender. The only time I may scrape is if I hit a big speed bump. Not a big deal, just go around them.
  7. K

    Magnaflows or Magnapacks for Bullitt Mustang?

    I am not a fan of the Magnapacks. They sound like a bad glasspack. Of the two I would choose the Magnaflows for certain. They are more of a quality sound and can get nice and loud with an X pipe with out the loss of the good quality sound. My personal preference is LongTubes, catted H pipe...
  8. K

    Anyone deal with Excessive Motorsports?

    Are they still in business? I thought they went out of business from all the bad business that was going on with them. Now I think there are two companies named Excessive Motorsports. The Big company that previously advertised alot in MM&FF are the ones that were screwing people over. The...
  9. K

    Nitto 255/40/17 and 235/45/17 on stock wheels

    Do you like the 255/25/17 on the front. I afraid they might look to big if I get them.
  10. K

    Nitto 255/40/17 and 235/45/17 on stock wheels

    Do you have any Pic's of the tires on the car?
  11. K

    Nitto 255/40/17 and 235/45/17 on stock wheels

    I need to replace my stock goodyears and was considering going a little wider in the rear with a lower profile in the front and the rear. Any one have any experience with a similiar combination. My concerns are the 235 width in the front (don't want it to look to small) and the lower profile...
  12. K

    Cam numbers?

    Was the car tuned or was the 29hp just dropping the cams in and hitting the dyno? Are there any side effects running your stage 2 cams on a stock car?
  13. K

    Engine pinging at ~5k RPMs

    Hey Bro, I have the same problem with my 01 Bullitt. I just my car into Ford and had them check it out. The Ford tech said my computer is not reporting any codes. He said I have to much timing so he could either pull some out or I could run higher octane gasoline. I chose to leave the extra...
  14. K

    Terrible window squeaking

    I had the same problem so I took the car to Ford. They said the window guides at the top of the door were causing the problem. They replaced them and the problem is now no longer. PS. I asked them if they could just lube them and they said no, the problem would reappear for sure.
  15. K

    Cheapest price for Dr. Gas O/R X?

    They come with the ball and socket joints but there are several other joints that have to be welded togther. Use C clamps to install and then drive to a muffler shot to get it welded together.
  16. K

    pics of dr.gas x (for LT's) installed? tips?

    Its a 30 minute install. Fit it together, clamp all the joints and drive over to your favorite muffler shop and have them weld the seams. Remove clamps and enjoy. Theres nothing more to it.
  17. K

    How to install gears?

    Anyone know of a write up on a gear install. I am looking to install these myself,. I have a chilton but I would rather have a step by step set of instructions. Thanks
  18. K

    how much to install clutch

    Is there any documentation written for the 99+ Mustang detailing a clutch replacement?
  19. K

    how much

    Do you live near Atlanta? I will do it for $200, your help, and some beer. It will take six hours.
  20. K

    Gonna do the 4.10's!

    No, everything looks good. I am interested to see how your install goes. I have thought about installing mine myself. For $38 you can't beat the price if you can do it. Have you ever installed a gear before? Do You have some instruction you are going to follow? Please let me know how...
Top Bottom
Back
Forums
Menu