Search results

  1. M

    2000 Mustang GT ECU

    Behind the passenger side kick panel.
  2. M

    Why does my Dyno Sheet Look Retarded?

    oops, you are quick. I edited my response.
  3. M

    Why does my Dyno Sheet Look Retarded?

    It looks good to me. Here is what the curves should have looked like if they had made them different colors like they should have... The scale for HP is on the left and the scale for torque is on the right. Since the scales are different the crossover won't "look" like it is at 5250...
  4. M

    MGW handle with Tri-Ax shifter?

    It fit my Tri-Ax just fine. The best handle I've ever had.
  5. M

    Cobra brake kit for GT

    Best price I have found on the net... (about half way down) http://www.mustangparts.com/suspension.htm $399 for the complete Cobra front kit. $1099 for the Cobra R kit. I got the Cobra rear kit from them and couldn't be happier.
  6. M

    Mach 1 Chin Spoiler on 01 Cobra

    Do you have a better side picture? That is tucked back pretty far under the bumper. I don't like it. I think the people that are asking want to know if it fits flush all the way around the way it fits on a GT bumper. It looks like it doesn't.
  7. M

    Placement of Directional Rotors

    Different brands face different directions. As an example, Brembo and Powerslot "slots" are opposite from each other. The vane pattern inside the rotor is what's important NOT the holes or slots. If they are directional rotors they must be orientated to direct air from the center to the...
  8. M

    Got a TSB # for TR3650 Grind!!!!!!

    Couldn't see them. Here is the direct links to jrc_03_gt's pics. (copy and paste or hit reload after clicking on the links) Page 1 http://community.webshots.com/s/image15/0/35/16/166203516BuitQp_fs.jpg Page 2 http://community.webshots.com/s/image14/0/35/36/166203536VNpIIE_fs.jpg BIG...
  9. M

    Got a TSB # for TR3650 Grind!!!!!!

    Can anyone get a copy of the full TSB sheet? I want to see the parts list and proceedure.
  10. M

    5.4 into a stang

    Big cowl hood :jester: :worship:
  11. M

    2002 GT, How much oil with filter change??

    Just to be a P.I.T.A. the manual says 5.25 quarts with filter change. In other words, 6 will work.
  12. M

    They dont fit and im pissed

    On my 2K the quads came from the factory mounted oppoisite of what your picture shows.
  13. M

    Rear suspension question

    The torque arm doesn't really get in the way of the exhaust, the panhard does. The MM panhard works with the stock cat-back and any aftermarket one that routes the pipes exactly the same as stock, Magnaflow doesn't. I ran with a panhard and FRPP uppers for a while and it did make a noticeable...
  14. M

    AODE to TR-3650 swap advice needed

    Here is the list I am using for the same swap... Trannsmission Clutch Pressure Plate Flywheel Throwout bearing Pilot bearing Clutch fork Clutch cable Clutch pedal assembly Manual trans wiring harness Driveshaft from auto will work but you need the input yoke from a stick. Shifter...
  15. M

    Battery relocation kit install questions (any pics)

    Use a car stereo power distrobution block under the hood. Something like this works good... http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=263-502
  16. M

    suspention POLL!!

    Coil-overs won't fit with the Steeda 5 link. Pinion angle still "floats". Torque arm can weight more. Subframes are required for most kits. Ford seems to like a true 3-link now for the 2005. No kit for that, yet.
  17. M

    Drilled/Cross Drilled Rotors...

    200 miles, that is one track day.
  18. M

    Drilled/Cross Drilled Rotors...

    And you probably will never have a problem. Not enough heat generated on the street. They do have the looks factor. On a road course it is a whole different story. If you ever end up doing that then prepare for cracking between each of those little holes. I've seen it on EVERY brand of rotor...
  19. M

    Drilled/Cross Drilled Rotors...

    Depends on the brand, the venting on the inside of the rotor is what counts. On Brembos, when the vehicle is in forward motion, the pad is supposed to hit the outer end of the slot first. I have been told that Powerslots are the opposite.
  20. M

    Stupid question : shock/strut assembly

    This is a joke, right? A week to put shocks/struts on? DARWIN!!!!! Thou hast forsaken us!!!
Top Bottom
Back
Forums
Menu