Search results

  1. H

    Chrome trim pieces

    Thanks Valley I found them and ordered them as well as a few more things. Found a Mustang plus
  2. H

    Chrome trim pieces

    I am looking for the Chrome trim pieces that cover the inner fender well from the fire wall to the rad support? Anyone know who carries theses and what they would call them?
  3. H

    Have old Tamiya R/C cars from the 80s?

    I too am plagued by this need to play with miniature cars. lol I just bought a Ofna Nitro 1/8th scale buggy the thing is scary fast. Bought the wife a 1/5th scale gasoline powered monster truck. It will run about 35 40 mph and run for about 2 hours on a tank of weed eater gas. It is a lot...
  4. H

    need a little help

    Thanks fast. I figured that out after posting lol. The only port I need is for the PCV valve and I will just use the big port on the carb. I am using pro billet so no vacuum on the dist. It's been 4 years since I pulled the old motor out so I have forgotten a lot as I am putting things...
  5. H

    Heater Hoses

    Thanks guys wasn't sure. I am using the metal hoses and needed to cut them so I could hook them up.
  6. H

    Heater Hoses

    Which one goes to intake and which on to the water pump? It's on a 67 need to hook up the hoses but can't remember which way they go. I have top and bottom hose coming out of firewall
  7. H

    need a little help

    I have an msd 6al and need a good ignition 12v also on electric choke does it need igntion or constant 12v? Where is a good vacum port for vacum secondery's on a Wiend Stealth?
  8. H

    Upgrade brakes to power???

    What is involved in putting a power booster into my 67? I already have the 4 piston disc brakes for the 67 mustang. I am also curious in upgrading to a slotted or cross drilled rotor do these really make that big of difference on a street car. I plan on calling Open Tracker to order roller...
  9. H

    Where's the best place to find ...

    Check out mustang1.com they have a lot of old parts cars to pick through Nice guys as well
  10. H

    Break in

    As the time draws closer for me to do the initial start up on my 302 I have a few questions. On the AOD I was told to hook to TV cable up to the Throttle at WOT with the TV cable pulled. I plan to have a Trans shop actually set mine but as long as the car/trans is in Park there is no danger to...
  11. H

    Drive line /9 inch help

    Thanks guys got to thinking this morning. I measured the Yoke went o Oriely's had them pull some u joints out for a 9 inch rear and measure the u joint a 569 was the size that fits. So looks like I can get them started. Get the DS back and the new H pipe fabed up then I can do the break in on...
  12. H

    Drive line /9 inch help

    What is the correct tourqe settings
  13. H

    Drive line /9 inch help

    Thats the bad thing I did a aod swap and the original c6 and drive shaft was stolen from my old garage so I do not have the old u joint. I have a puller and bought a socket today to fit the nut. I had th whole pinion out about a year ago and had the seals replaced so it may not be to bad. I...
  14. H

    Drive line /9 inch help

    I need to take my rear yoke off the pinion shaft to take to the drive line shop so they can build my drive shaft for me. Can I just remove the large nut and remove the Yoke or will I mess up the seal by doing this?
  15. H

    new kick panels in vinyl

    I just picked up some Infinity 6 1/2 's and they are two inches deep. I am hoping they will work. Going to try and cut an old set of covers and beef up the mounting with plywood ring and see what happens.
  16. H

    Got my wheels on........

    Looks really good what suspension set up do you have? Zoomed in on the pic of the back of the wheels. the fronts are 235/45/17 Again really nice
  17. H

    Anyone using tri bar's

    I ordered some Tri Bar headlamps yesterday was wondering/hoping they are all they are cracked up to be.
  18. H

    best way to lower 67

    Suppose to. I have mid eye 5 leafs
  19. H

    New Wheels (Finnaly) pic

    To be honest haven't got to drive them to much. Hopefully can have a report for you soon. LOL on the Bright light yeah I will try and get you some new pics
  20. H

    best way to lower 67

    LOL Guess I could ride on the hood? extra 300 pounds up front should do the trick. I think I am going to cut the coils. Are the blocks safe for the rear? One thing I just thought of. The car is lacking Antifreeze/radiator, hood, grille and interior. I moved Battery to the trunk but it...
Top Bottom
Back
Forums
Menu