Search results

  1. scarless

    Machine Shop Blues

    Ditto, don't let him touch the block. So far he has done nothing right that he could charge you for. Get a FULL refund and go somewhere else.
  2. scarless

    Help! 94 Heater Core!

    Here are some tips to change it without disconnecting the AC. The article is for 93's but SN95s process is almost the same. http://www.mustangmonthly.com/howto/5652/
  3. scarless

    fuel injectors?

    You will be fine just don't over rev it. SN95 fuel pumps put out 90-110lph.
  4. scarless

    What cam for SN95 331 AODE?

    I currently have a Steeda #19 I could use, but I was looking at the CompCams grind 35-351-8 XE270HR 114 degrees \w .512/.512. I also have 1.7 cobra rockers. That would put the lift in the .545 range. The 35-324-8 XE270HR grind for 1.7 rockers has the same specs but on 112 degrees. Neither say...
  5. scarless

    What cam for SN95 331 AODE?

    One more thing, it has to pass emmissions in Atlanta.
  6. scarless

    What cam for SN95 331 AODE?

    Crane springs, good for .560 I think. Heads arn't done yet. I'm hoping they flow about 210/170 at .500. I'm hoping to not mill the heads much, if at all. I don't want the compression ratio much over 10.0:1.
  7. scarless

    What cam for SN95 331 AODE?

    That's always good, but I'm looking for off the shelf.
  8. scarless

    conv top motors are friggin expensive

    Get them on ebay.
  9. scarless

    Rear brake upgrade??

    The 13" kit is mostly for show. The M2300M kit requires you to pull the axels. True the calipers are the same, but the Cobra caliper brackets are a bit taller. You need to clearance the inside tops of the brackets to fit the 11.65 rotors. Get the kit for $154 at...
  10. scarless

    What cam for SN95 331 AODE?

    Here's my combo, what cam? Remember it's for an AODE! 331 Stroker 10:1 cr SN95 Cobra \w ported lower 70mm Throttle Body 80mm MAF 30# injectors GT40P heads ported 1.85/1.46 Manley race flow valves 2800-3000K converter AODE \w shift kit 4:10 gears
  11. scarless

    rear cobra brakes question?

    You need the Rear Brake Kit M-2300-M. The best price is $154 at http://www.johnbleakleyford.com/partssearch.asp?search=BRAKE It has all the brackets and rotors too.
  12. scarless

    Advice for my 4.10's

    You will also need a SpeedCal to correct your speedometer. http://www.dallasmustang.com/page/products.php?category=&group=&family=&product=9910 If you bust the ABS sensors, get them cheap at www.fordparts.com
  13. scarless

    Advice for my 4.10's

    Read this: http://www.superstallions.com/tech/drive/gears/gears.html
  14. scarless

    POST HERE IF YOU DRIVE AN AUTO

    My truck is a stick, I know. :owned:
  15. scarless

    POST HERE IF YOU DRIVE AN AUTO

    You know it! You can get a built trans and converter for about the same money as converting to a stick.
  16. scarless

    Loc-tite on aluminum heads

    Forget the Loctite, use anti-seize. That'll keep'em in their! :ban:
  17. scarless

    POST HERE IF YOU DRIVE AN AUTO

    I've owned both and I've kicked more than one butt while driving an auto. Most yahoos with a stick smoke the clutch or the tires at the line, then they loose. Others shift too soon or miss the shift all together. It takes pratice to launch and shift a stick well. Don't get me wrong, I love...
  18. scarless

    He thought his car was fast....

    Run 93 octane and bump your timing as high as you can, then dump a lot of water on HIS tires at the line. :flame:
  19. scarless

    Loc-tite on aluminum heads

    Try what ever you like, not my car, go ahead and try it. If you do a search for header bolts, you will find that this is a very common problem. People have tried all kinds of things to prevent leaks. After trying 2 sets of bolts with lock washers, lock tight, 3 new gaskets, and constantly...
  20. scarless

    Loc-tite on aluminum heads

    Just spend the cash on 1" Stage 8 bolts. Copper RTV on both sides of the gasket. Tighten again in a week.
Top Bottom
Back
Forums
Menu