Search results

  1. T

    Projector Headlights from 50RESTO??

    I put these on last summer, love em! Warning though, on mine the pin connectors were in backwards.... So low beam was high beam and vice versa. Nothing a couple of minutes and a paperclip (used to push swith the pins) couldn't fix right up though. The 9004 to 9007 ticked me off too, cause I...
  2. T

    running lean cuz of a cai?

    Ok, who else out there has their MAF turned at an angle? I never heard of that but it seems to make sense with the tubing bend right before it! So what angles are you running?
  3. T

    Tweecer needs wideband O2 to work right?

    It really makes that much difference huh? I had spent $400 for a custom chip, which made a small difference (nothing impressive), but my computer burned out shortly after installing it. So I never reinstalled it with the A9P I put it.
  4. T

    king cobra done, centerforce in mind

    SPEC Stage 3 is by far the best I've tried!!! Killed the regular Motorsport, KC and Centerforce DF... SPEC put the SPEC in reSPECt as far a clutches go! Stage 3 does have a stiff pedal though, so go with a stage 2 if thats a concern.
  5. T

    Spintechs are on! and man do they sound good!

    Guess I must have been hiding in a cave, never heard of Spintech...
  6. T

    Fuel Sender replacment time?

    Mine went out at around 180,000 miles. Maybe I got ripped, but I think I paid around $100 for the sending unit through FORD. Here's a tip though, since I didn't see a larger fuel pump in your sig. Get the 255lph pump to change at the same time. If you still have the stock pump then your...
  7. T

    o2 sensor question

    Your A/F guage works great? Mine bounces all over... Which one are you using?
  8. T

    Tweecer needs wideband O2 to work right?

    Ok, I'm thinking about the Tweecer RT. Just read that in order to monitor A/F ratios you to get wideband O2 sensors.... Heck, straightening out my A/F mixture is my main reason for wanting one of these anyway... Unless you can control A/F ratios without this wideband sensor, is this Tweecer...
  9. T

    cam suggestions

    Sounds like you have a great cam now. I have the XE35-328-8 cam and it's rockin hard.
  10. T

    What should I buy next....MAF or TB?

    I do like the C&L 76mm MAF, I have both that and the Granatelli 75mm. The Granatelli gives a little smoother low end but the C&L kicks serious but top end! The install for the TB isn't that bad. Just mark the material that needs to go, stuff a rag down the intake and dremmel away. Vaccuum...
  11. T

    Trick flow twisted wedge or afr 185's on...

    AFR, nothing beats them! Plus you can get them with the 58cc chambers. :)
  12. T

    What should I buy next....MAF or TB?

    I can tell you that the TB is one heck of a fun mod! It doesn't really give you much more power if your mostly stock, but it brings the power to front of the throttle! Breath on that gas pedal and it's like you stomped on it! I'd suggest Accufab for the brand to get, I had the BBK and it...
  13. T

    Purchased CHP 306 Street fighter, a little confused..

    For a Clutch go with the SPEC Stage 3! I totally LOVE it! Beats the heck out of the other clutches I've had by far! Good price too, not overly expensive or anything.
  14. T

    Power Adder Group Purchase idea!

    Update with JD's Performance. I just talked with Dave at JD's. I asked him about the Paxton, ProCharger and Vortec S/C's. Since I didn't have a group yet I just asked him hypothetically about discounts in general on these. The only one he said he could Discount was the Paxton by 3%. Here...
  15. T

    Power Adder Group Purchase idea!

    Hello Stangers! Here’s an idea I had. Please review and let me know what you think! Sales Theory: The more you sell the more commission you make, bulk sales are preferred. Think about it, when you buy in bulk you usually get a better deal. If you were a seller wouldn’t you give...
  16. T

    coil overs VS ajustable control arms

    Oh man, those lower adjustables have me drooling. Problem for is that I already have a set of Southside Maching Bars welded in.... So that switch over would be a major pain in the butt! Maybe one day....
  17. T

    Novi 1000, to buy or not to buy...

    Ok, JD's wants $1,770 for them. Suprerchargesonline wants $1,749, but free shipping. Here's a plan. Whether you like the Novi 1000 (looks like$1,640 to $1,749) for a stealthy system, or the ProCharger (I think $2,250? was quoted - info at work) for a system with a noticable sound and more...
  18. T

    Novi 1000, to buy or not to buy...

    I have an idea. Maybe Superchargers4less will work a mulipurchase discount of some kind if we get a couple other Stangers together and offer them a group purchase if they give us like 10% off or a free upgrade or something? Anybody out there think this is worth a try?
  19. T

    Putting tubes in a tubeless slick?

    That's what were here for! Stangers look out for Stangers, preventing damage and pumping the power!
  20. T

    Putting tubes in a tubeless slick?

    Structural integrity of the tire is shot. Sure the tube will get it to hold air, but when you really get on it and that thing starts to flex it just might decide to peel off the rim like a banana and cause a lot of damage coming off. Go get another tire is my advice.
Top Bottom
Back
Forums
Menu