Search results

  1. chgovfk

    Storing an 07 Mustang GT for the nxt 6 Months - any tips?

    For work - I have to leave for the nxt (6) six months - major city - so I don't want to bring the Mustang - I plan to do the following for Summer to Fall storage - please let me know if I'm missing something ...o_O My OCD runs deep and I'll probably have to fly back once in a while just to...
  2. chgovfk

    latemodel resto

    Jarrod - is LMR going to do that buy 3 pieces - get a discount action again? - it was around x-mas time last time - just wondering.....:confused:
  3. chgovfk

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    "he was constantly getting stuck in my sump pump in the basement. Sure, I may have told him it was a water fountain, but he could have waited until the next rain to drink out of it instead of trying to sip water from the very bottom. I also caught him eating my dog's food numerous times"...
  4. chgovfk

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    Ding Pao I thought was being contracted out nxt door - with this new garage - Scott can maybe get him back? - maybe an extra bowl of rice once a week - a few trips to the good will and Ding Pao will never be happier -Scott - here's your chance - ......thanks for the info on the G2 - I mean...
  5. chgovfk

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    Hey Scott -Your work .....as usual is outstanding :nice: .....this car better be in 5.o magazine when it's completed - What's so special about this G2 caliper paint? - I have to paint my calipers and spindles one day soon - is it a heat issue? can't you just use an epoxy paint of some kind...
  6. chgovfk

    FRPP or Mutha Thumpr Cams

    I've had the mutha thumpers in my 07 for the past 2-1/2 yrs - they do have some slight driveability issues - like for mine - it ramps up in the rev's sometimes - ( I've cleaned the throttle body twice) - when the A/C is on - or sometimes by itself - not always - but enough to be annoying -...
  7. chgovfk

    10 Best Mustangs

    65' fastback shelby hertz - the blue one 65' fastback GT 2003 Mach 2001 bullitt 1996 mystic cobra 2004 mystic coupe or vert cobra 1970 or 1969 nascar boss 429 1993 cobra 1993 limited edition vert's - yellow and white
  8. chgovfk

    4.10 or 3.73???

    I was apprehensive about putting in my 4-10's - now I wonder why I even worried about it - 4-10's hands down!! - you'll feel it in the 'seat' of your pants!
  9. chgovfk

    Do I need a tune with my mods?

    What I did was the exhaust 1st (no tune needed) - then buy the CAI and the tuner together as a package - you'll save $$ -
  10. chgovfk

    Is this worth it?

    I say no - unless this is some 'show' car you don't plan to drive or rarely drive -although it's your money - I paid around $350 for my exhaust system - shorties + off road H + welded in cherry bombers - it sounds bad as heck for me - I bought my 07 Gt new and never plan to sell it - but I'm not...
  11. chgovfk

    Considering buying a super clean low mileage 05 GT, Carfax please!

    No major issues (some guys get picky about the hard to change spark plugs (should be done around 25k - they crack in 1/2)) - an 05 GT w/45k - I would be sure to check the usual things w/any used car - is it a (1) one owner? / any pictures? - plus wouldn't the guy selling it have kept the ford...
  12. chgovfk

    My workshop

    My (2) two car garage w/the 93 project coupe out (not too long or the HOA nazi's who love to ticket me for it - will call me in) - of course something always ends up getting put back in on jack stands - it's like a 'chinese' fire drill for me moving all (4) four cars around to get something in...
  13. chgovfk

    5.0 emblem placement

    I've not seen the blk one's on a fox - but there was a car in 5.0 magazine that had them stock silver - looked a little over sized for me - but pretty neat - I think w/your car and the dark colors it should pop.
  14. chgovfk

    5.0 emblem placement

    Thanks tca and ERM636 - I was hoping someone had a low mileaged / know no wrecks car to measure. I'm repainting my project - still going back and forth on 5.0 emblems / no emblems / could go 5.8 (installing a 351w) but those are - I don't know - odd to me - or small pony emblems (from 03/04 V-6)...
  15. chgovfk

    Dupont Vari-prime vs. epoxy primer - w some progress pics

    Thanks Scott - yea I guess I'll keep looking around / research and come to some conclusion - thanks for the link - I was always use to the fact that filler loves bare metal (although that was 20 yrs ago) - so ur right confusion confusion .......I have some time - hopefully I will have it prepped...
  16. chgovfk

    short block rec

    Question - I know you don't know if you have terminal damage to the block you have now - but if it's salvagable and you're on a budget - why not just rebuild the original block? you could have it machined and fix the damage.
  17. chgovfk

    Dupont Vari-prime vs. epoxy primer - w some progress pics

    Yeah - I'll have to talk to my old boss - I have a ways to go - b/c I plan to just 3M red scuff the firewall (no filler or metal in-fills there ) plus the underside and topside of the K member - but the rest ....see I thought I could just sand it all down to bare metal - weld the metal in fills...
  18. chgovfk

    Dupont Vari-prime vs. epoxy primer - w some progress pics

    Hey Scott - not sure - my old boss at the bodyshop swears by it - that doesn't make it a complete truth - he said to lay this down before any other primers or sealers / light coat of Vari-prime on all 'bare metal' - standard procedure at his shop - and his shop is one of the best - I'm asking...
  19. chgovfk

    Dupont Vari-prime vs. epoxy primer - w some progress pics

    Anyone have an opinion on either using Dupont Vari-primer or Epoxy primer on bare metal? - I hear Vari is an excellent corrossion inhibitor - but can be a little more costly - I'm at the point in my project where I'll be spraying it soon - I have a steel contractor who is going to CNC all of the...
  20. chgovfk

    5.0 emblem placement

    That's a good question - I hope someone will respond
Top Bottom
Back
Forums
Menu