Search results

  1. 6

    engine moving/ handling changes

    No it would help handling.
  2. 6

    piston bore clearance?

    Piston Way to loose, he is responsible. What you have now is junk if you are checking 90 degrees to wrist pin. Some other brand pistons do fit that loose.
  3. 6

    Mustang Drop Spindles

    Spendles For myself a 1" drop is preferred. Question 2, If both holes are machined I would include a little extra metal around the non stock hole. Maybe a tapered bolt to use when using the stock location. Can't collapse if there is a tapered bolt in there. I will buy a set if, 1 drop is not...
  4. 6

    EFI on a 351C 4V

    If you weld injector bungs into your intake, why can you not use a old (dry) carb for a throttle and plum in a iac valve in the back of the intake. Carb does not even have to be good.
  5. 6

    Review for Randalls Rack

    Rack I to bought a randals rack, which looks like a nice product. My problem was that he sent and charged me for the pump that I did not order. Was told to return the pump and he would refund to my credit card. The refund was less the return ups charges. Also I did not get the steering joints...
  6. 6

    Wanted: 8" posi

    Have 8" ford equa lock in excellent shape, posi only, $250 + ship
  7. 6

    ISKWEZM I have a ? for you

    C4 Use intake vacumn. Screw is in mod nipple, screw in about 2 turns at a time, will also move 2-3 shif up also. If 2-3 is ok now, you can open the valve body and change the 1-2 spring.
  8. 6

    Exhaust ports on 58cc Jegs heads

    You have the better raised exhaust port heads, any grinding on bottom of head will hurt flow.
  9. 6

    Chevy rod on Ford crank?

    5.7 Yes the chev rod can be narrowed to ford width. What is your crank, piston combo for 5.7 rod.
  10. 6

    Piston / Rod combo?

    I think your pistons have a chev pin. .927 chev, .912 ford
  11. 6

    dumb question of the day...

    Leaded YES
  12. 6

    Billet Specialties; Anyone got pulley experience?

    I would not hesitate. Go for it.
  13. 6

    Noisy fuel pump

    Go for a in tank pump. pump will also run cooler.
  14. 6

    Anyone know where to get a stainless tank for 71-73 Mustangs?

    This tank is for a 66 fb
  15. 6

    Anyone know where to get a stainless tank for 71-73 Mustangs?

    Toll free call They make the tanks for all mustangs. They have been in business for a long time, and I have purchased from them and never been disappointed. They can make the tank with a little more room on the driver side so that you can get big exhaust in easily with no rattles. They also...
  16. 6

    Anyone know where to get a stainless tank for 71-73 Mustangs?

    EFI SS Tank Rock Valley Ph 1-800-344-1934. I have one ordered, not cheap, but then what is?
  17. 6

    ring pinion spline count question

    Why not go 35 spline as long as you are buying axels and locker.
  18. 6

    Home made toe in Gauge

    Toe Yes found it at longacreracing.com. Thanks all.
  19. 6

    Trick Flow vs Canfield Heads

    Heads Aluminum heads flow more and weight less. Both are good, I hear that the canfields outflow everything. Either one will be very good.
  20. 6

    Home made toe in Gauge

    A while back, some one had a plan for a toe in gauge, it was a piece of alum. bent 90 with a small cut for a tape measure to fit in, you need 2 of these. Any one remember the site or know where you can buy these.
Top Bottom
Back
Forums
Menu