Search results

  1. kowalczyk86

    Is it time for a new radiator?

    The coolant is directly below the radiator, so I thought that was the problem. If you click on the picture, it will blow up and you will see what I mean. I haven't checked the cap though.. Where would it "squirt out"?
  2. kowalczyk86

    Chk engine light - Code 11's - what next?

    In recent threads you will see I have been having a problem with my check engine light coming on/off sporadically while I am driving. I got an LED scanner and got code 11's just now on the KOEO test and KOER test. Where do I look next? I am thinking to take all the contacts on all of...
  3. kowalczyk86

    Is it time for a new radiator?

    Initially when I saw a couple of drops of antifreeze directly below the water pump, I thought that was the problem.. After I ran the car at 2k RPM's before the KOER test, here is what I found... Is it time for a new radiator? Radiator and water pump while I'm at it? Shawn
  4. kowalczyk86

    Felpro water pump gasket - sealant/no sealant?

    Sounds good - thanks for all the input. I am gonna get this done this weekend..
  5. kowalczyk86

    Felpro water pump gasket - sealant/no sealant?

    The Duralast pump I just bought has a gasket on the pump already (which I will remove and put in the Felpro). Do I need sealant pump to plate and plate to block or just plate to block?
  6. kowalczyk86

    Felpro water pump gasket - sealant/no sealant?

    Felpro water pump gasket - use sealant or no sealant? That is the question.. I heard some say yes to both.. Any good tips on water pump installation? From the forums I do not think it will be too bad..
  7. kowalczyk86

    How do I test sensors?

    Sounds good, I ordered the Equus and it will be here Friday. I'll take the other back to Autozone. I ran the test a couple times, but I am still not sure if it is a 22 or an 11. I shall know soon enough. I appreciate all the input, and I'll report back when I have more info. Shawn
  8. kowalczyk86

    How do I test sensors?

    So I got a $30 reader from Autozone.. I am not sure where the guy prior to me was getting a code 13, but it seems like I am getting either a 11 or a 22. I am leaning toward an 11, but if I do, what is causing the check engine light? KOEO: BEEP - BEEP PAUSE BEEP - BEEP VERY LONG...
  9. kowalczyk86

    How do I test sensors?

    Idling seems like it has nothing to do with this problem, and I am trying to figure out why I cannot get any codes at all. Initially the guy at Autozone got the code 67 and 13 - now I can't get anything. I ran the test with clutch in neutral just as it said.
  10. kowalczyk86

    How do I test sensors?

    I just ran the scanner and cannot get any codes EO or ER. I can tell that the motor picked up a scanner because with EO I heard the relays go off, and with ER it revved up. I noticed there were a couple small drops of antifreeze on the ground so there is another problem I have to fix. On top...
  11. kowalczyk86

    How do I test sensors?

    I am getting a code 13, and I replaced my IAC valve, and I am still getting it. The check engine light only seems to some on sporadically so it seems to me that there is a bad sensor somewhere. The car runs perfect, I just don't know how to go about testing for bad sensors.. There seems to be...
  12. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    You will all get a laugh at this (or tell me how stupid I am).. I bought a new IAC from Autozone (Duralast). JUNK. My car idled up and down between 550-700 or so. I took it back. I put on my old IAC and this is what happened when I tightened it. So I just now bought a Motercraft...
  13. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    And a 12 is pretty much the same as a 13 so maybe I will do the same.. was your iac dirty? Mine wasn't too bad.
  14. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    Going to take a multimeter to iac this weekend when I have time Not surebwhat else to do.. running out of ideas. Car is idling at 800 so not sure why the lights coming on. Adjust the throttle???
  15. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    First of all, thank you all TREMENDOUSLY for guiding me along. I really appreciate it.. I took off the IAC - looked pretty clean - I wiped it out as best as I could - I even took it apart to clean in there as well. I looked for problems with vac lines. There is nothing apparent to me...
  16. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    LarsD, Not sure if this helps also, but check it out.. I cannot understand a lot of what is being said: How to Tune and Modify Ford Fuel ... - Google Books Pg. 74... I am going to try to disconnect the IAC connection tonight when I get home. If the RPMs drop when I disconnect, does that...
  17. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    Thanks. I will check it out. If that fails do you have any other ideas? Is this valve easy to get to?
  18. kowalczyk86

    Cannot control RPM during ER Self-Test low RPM check

    89 Mustang 5.0 Check engine light has been coming on/off for the past month or so. It only seems to come on when I accelerate, and then immediately turns off. At that it doesn't ALWAYS come on when I accelerate, just sometimes. My buddy ran KOEO test (not sure why he didn't do a test with...
  19. kowalczyk86

    People amaze me

    I pd. $9,700 for 89 GT convertible w/7,800 miles - in near mint condition.
  20. kowalczyk86

    Need 89 cruise control cable

    Need 89 cruise control cable with all parts. Let me know if you have one.
Top Bottom
Back
Forums
Menu