Search results

  1. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    They stick out about 1.5 inches
  2. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    AFS makes them i believe the the numbers are: +27mm offset with 6.9 backspacing. Those numbers are from there website and I'm not 100% sure they are AFS since I'm going by what the local seller told me, how do I measure them to make sure?.
  3. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    Ok So I just took some measurements of my Gaps and this is what I got (From top of the tire to the bottom part of the lip of the fender): Rear: 2.75 Inches (2 3/4") Front: 2.25 Inches (2 1/4") Does that seem right?
  4. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    Yes me to.
  5. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    So basically there is nothing I can do to the brakes/rotors/hub/calipers etc.. to make the wheel push in more correct? Unless I get different wheels? I just thought since you can add spacers to push the wheels out, then there must be a way to push the wheels more in.
  6. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    Actually I found out the part i was trying to point at are the rotors...Now to see if i find a rotor with a flatter head then stock so the wheel will push in more.
  7. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    You have 10 inch wheels and I have 10 and half inch wheels though which I think is what I should have gone with. Even if I put 315 tires that won't shrink the RIM since it still sticks out from the fender.. I like your drop though, do your H&R springs drop lower then my pro eibachs?
  8. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    WARNING NOOB QUESTION COMING UP :) Is there such thing as an aftermarket brake drum that is smaller (i think thats what its called)..In the picture below I highlighted the "brake drum" in red. I'm looking for one that is about 1 inch skinner in the middle (I highlighted that part blue)...
  9. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    I already have eibach lowering springs, i can't lower anymore unless start cutting:(
  10. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    More pics:
  11. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    I was afraid since they were 335's that 35 sidewall would make them rub so i went the 30 route. But I can see how it would lessen the gap.
  12. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    What do you meant less backspacing?
  13. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    Like a straight back shot?
  14. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    1 more pic
  15. Mr Boogeyman

    18" Cobras with 335 Tires Installed!..Not Digging Them

    18" Cobras with 335 Tires Installed!..To Big? So I bought some 18 inch Cobra wheels (fronts are 18x9 and rear are 18x10.5). On the front I have 265/35/18 and they look good so no problem there. On the back I have some 335/30/18 tires. They fit fine with no rubbing however I thought they...
  16. Mr Boogeyman

    Lightning Injectors and Vortech

    damn really? so i downgraded? i have an 01 gt...
  17. Mr Boogeyman

    Lightning Injectors and Vortech

    I just read that on a website. I'm not sure what heavily modified means but my engine is stock other then usual bolt on ons like CAI, LT Headers W O/R H-Pipe, Flowmaster 40s welded, 4.10 Gears, J-Mod, Tranny Cooler and Eibach Pro Kit Suspension/Springs.
  18. Mr Boogeyman

    Lightning Injectors and Vortech

    Actually the 75MM MAF is from BBK...I got it with a Trickflow Plenum before buying the supercharger parts. I just was not sure if I can install it on a stock motor (it will be another couple of months before I can afford to install my S/C thats why I want to install it)
  19. Mr Boogeyman

    Lightning Injectors and Vortech

    When I bought the mounting ki I was told it was everything but I have not really inspected it with the manual but I'm pretty sure its there.. Also do you guys think its safe to run 75mm MAF on a stock mustang?
  20. Mr Boogeyman

    Lightning Injectors and Vortech

    Cool..Yeah been buying parts slowly the last couple of months..
Top Bottom
Back
Forums
Menu