Search results

  1. D

    Engine Mod Advice Needed

    I am putting a non-roller 302 in my 87 fox. i hav ebeen reading up on cams and choices for us non-roller guys. I want a lopey idle and good torque gains. i have decided to get a lunati hydralic flat tappet cam with about a .500" lift. I have talked to few motor builders and they say as long as...
  2. D

    300 rwhp

    umm.....I am putting a carberated 302 in my 87 fox. The motor is a 76 bronco 302. I have added a edelbrock performer intake, Holley 600 carb, i ported the stock close chamber heads, and im adding a lunati chydralic flat tappet cam with around a .500" lift. I have a stock H pipe with gutted cats...
  3. D

    Can i expect 300HP with this combo?

    I am putting a carberated 302 in my 87 fox. The motor is a 76 bronco 302. I have added a edelbrock performer intake, Holley 600 carb, i ported the stock close chamber heads, and im adding a lunati chydralic flat tappet cam with around a .500" lift. I have a stock H pipe with gutted cats, stock...
  4. D

    strut install on my 92 LX

    try putting the shorter one in and tighten it down...see how it rides
  5. D

    How do I get my p/s bracket off?

    kinda the same area.......can i use a 5.0 power steering pump on my 4 cylinder stang rack?i am swapping my car out to a carbed 302. i am keeping the power steering and i have a got a v-8 pump and bracket to just get the bracket, but if i can just use the v-8 pump with my rack then i wont need to...
  6. D

    anyone running a 4 cylt5 behind a 5.0??

    Just get a smaller inside diameter pilot bearing. they can be had at any parts tore for dirt and i believe that they are a izuzu part or nissan or something like that, you wont be able to find out that way but i got mine off of e-bay and it was labeled 4cyl T-5 v-8 conversion pilot bearing.....i...
  7. D

    Paint Job in a Can???

    This is what i did. I painted my car with KRYLON, thats right KRYLON, then i cleared it with automotive grade clear with a hvlp gun. it turned out good for a back yard paint job. very little money in my paint. here is my car... http://gotstang.com/profile.php?dedge&page=1
  8. D

    Windage tray HP diffrences

    Ummm yall are of topic dudes....WINDAGE TRAY WINDAGE TRAY lol...I think it'll wont be worth the money, imo
  9. D

    do these fit??

    Yeah the wheels size might just need to be UPEDDED
  10. D

    Chrome spray paint for pony rims?????

    BLACK BLACK BLACK!!!!!!!!!!!! BLACK RIMS
  11. D

    How much HP can i expect?

    I am putting a 76 bronco 302 in my stang. I know its a early "smogger" 302 and it never made a buch or power, but it has been rebuilt (stock) with close chamber heads that have also been redone. I am putting a Edelbrock Performer RPM intake on it with a Holley 600 cfm 4 barrel carb. I will soon...
  12. D

    Anyone hide their Salt & Pepper shakers?

    what the hell is the salt and pepper shakers?
  13. D

    Why cant I use my stock fuel pump?

    :bang: I guess I have decided to use all the stuff from a 84 or so carbed fox. I already have all the motor stuff(carb,intake,and so on.) I will just need the fuel tank, fuel lines, and a new mechanical pump. anything else? The motor is NOT a late 80's roller so the timing cover is one for a...
  14. D

    Why cant I use my stock fuel pump?

    thanks. how do i run a return line? is there already one on the EFI setup?
  15. D

    LOOK WHAT I DID!!! LOL

    5K lauch then go home....lol
  16. D

    Why cant I use my stock fuel pump?

    I know it will have enough pressure but can i regulate it down without it screwing up? read what these guys said. http://www.corral.net/forums/showthread.php?t=762946
  17. D

    NEED PIX OF A FOX LX WITH 93 COBRA RIMS--CONVERT IF POSSIBLLE

    Here is a pic of the baddest 93 cobra rims(the chrome ones) i have ran across. http://s123949004.onlinehome.us/index.php?cPath=203_262_266
  18. D

    Why cant I use my stock fuel pump?

    I am converting my 87 2.3 efi stang to a carbed 302. I am planning on using my stock fuel pump and regulating it down. I have been told that it WILL work and that it WONT?? What do you know about this and have you tried it and did it work?
  19. D

    What cam do i use???

    thanks i just might do that
  20. D

    What cam do i use???

    What cam do i use for a 1976 non-roller 302??? Ok Guys, i got that 75 bronco 302, I paid $300! It has close chamber re-done heads, rebuilt 70K ago, Im putting a performer RPM intake on it, and a 600 cfm carb. What cam can I put in the motor without changing the rockers and pushrods. It IS NOT a...
Top Bottom
Back
Forums
Menu