Search results

  1. SuperchargedB87

    Need help with stuck T/B Spacer.

    Thats cool, sometimes taking them studs out can be a real pain, I use the same method as you do, the double nut method. It was the gasket that was causing it to stick though wasn't it?
  2. SuperchargedB87

    Stumbling stang

    I agree, definately check the TPS, also check your fuel pressure.
  3. SuperchargedB87

    Need help with stuck T/B Spacer.

    They're studs that its on so if the throttle body is off the egr will come off. The same thing always happens to mine, what I do it keep tapping around it with a rubber mallet and working off, its the gasket thats holding it on, for some reason that one sticks, the TB one doesn't. Just have...
  4. SuperchargedB87

    How to tell throttle body size

    You could always get a dial caliper and measure it, if you don't have access to one, they sell on E-bay pretty cheap, and most are both standard and metric. Having one can also come in handy when trying to fabracate brackets and such for the car or even measuring bolts.
  5. SuperchargedB87

    aluminum driveshaft users come in...

    I got mine from Summit all together, all I did was bolt it in.
  6. SuperchargedB87

    exhaust choice

    I thought I heard before that an x-pipe makes more power with a straight thru muffler like borla or dynomax, and an h-pipe makes more power with a chambered muffler like flowmaster or Mac. I could have sworn I seen this in an old 5.0 or Muscle Mustangs when the x pipes were first coming out...
  7. SuperchargedB87

    Canton Oil Pan

    I just cut mine off and I just check the oil alot.
  8. SuperchargedB87

    What is the Best Mod you have ever done?

    Supercharger.
  9. SuperchargedB87

    radar detectors??? who useing emmmm?

    Do the jammers actually work? If you go by one of the radars on the side of the road that tell you your speed does it come up zero or something? I was always curious of this.
  10. SuperchargedB87

    Best place to get deal on radiator?

    I bought the 2 core Griffen from Summit also, it was $189 if I remember right works great, only thing is its universal so you have to make a bracket to hold it in.
  11. SuperchargedB87

    Compression Ratio too much?

    You'll be fine, especially with aluminum heads.
  12. SuperchargedB87

    Exhaust questions.....

    Does the muffler have to be off set still if you just run turn downs? I always ran tail pipes. As far as horsepower goes that is why I want to change to 3" exhaust and 1 3/4" headers, my new combo makes alot more power and revs alot higher, so I don't think the 2 1/2" exhaust is any good for...
  13. SuperchargedB87

    tps

    Make one hole into a slot so you can slide it over some and leave the multimeter on it while you slide. If I remember right you'd want to make the hole closer to the front of the motor into a slot towards the drivers side.
  14. SuperchargedB87

    Exhaust questions.....

    I want to change my whole exhaust to 3", my question is what kind of 3" cat backs are out there. I don't want to start any trouble, but I know Mac makes one, but I want to stay away from Mac. Does Borla make one? Really all I need is the flow tubes and mufflers, because I can just use turn...
  15. SuperchargedB87

    Very stupid question.....

    I'll try it out, I really appreciate your help.
  16. SuperchargedB87

    Querstion-91 starter relay on firewall.....

    Be sure to get a good one, because I put two junk ones on and when they go they keep the starter spinning while the motor is running. They only lasted me a couple of months.
  17. SuperchargedB87

    Cleaning gasket surfaces?!!!

    Scotch brite is what I usually use, but be very carefull on the aluminum. Use a good bead of RTV on the front and back of the intake, not the cork things, and use alittle RTV around the water passages on the intake gaskets. Use the plain gaskets on the sides, I always use Felpros. The head...
  18. SuperchargedB87

    Very stupid question.....

    Sirsureshot39 check your PM. Will the rear view mirror adhesive dry perfectly clear?
  19. SuperchargedB87

    tps

    Also, the TPS is plastic not lead and very easy to cut thru.
  20. SuperchargedB87

    tps

    Yes if you lower the idle screw the voltage will drop, but if your idle is where you want it, thats not an option. You can use a small round file to make slots or try a drill and cut thru with the side of the bit.
Top Bottom
Back
Forums
Menu