Search results

  1. 6

    Canton Oil Pan

    I can walk to Canton, it's across the street from my house! :spot:
  2. 6

    Changing Leaf Springs

    Hello all, Question replacing my rear leaf springs! Do i need to disconect the rear brake lines when doing the change? Or can I just jack the car up and place jack stands under the car and then use a floor jack to lift the rear up when unbolting the springs! Car is a 1965 289 4v 4-speed...
  3. 6

    EASIEST WAY TO REPLACE R.QUARTER INT. LIGHT

    LOL, I have a Fastback also, and I'd love to buy the lights for mine! But to change them you'll need to take the back seat out and the sail panels! Thats going to be my next project in my car this spring, to remove the backseat and replace the lights and change all the chrome thats on the...
  4. 6

    Removing fenders and front valence

    Fenders, Unbolt the bolts from under the hood, below on the bottom of the fenders and then open the door and undo the last bolt, the valance is pretty much the same just unbolt! Make sure to unplug the signal lights before you tug away on the valance! Not a hard job, make sure you WD40 the bolts...
  5. 6

    Putting in headliner tomrrow

    It's so much easier if you have the front and rear windows out! Headliner, Windows.........dash can be last! Good luck with the headliner. :flag:
  6. 6

    Santa

    So, what did everyone get for Christmas this year? I got two set of Craftsman tools and $50 gift card to Mustangs Unlimted and two Mustang tee shirts! :banana:
  7. 6

    m, r, s code ??

    oh yeah, what about the little W- code "427" engine! Not in a Mustang though..... Too Bad.
  8. 6

    New Photo Album

    I think that the Export Brace varies by the plant they came from! :flag:
  9. 6

    Considering buying this 66 GT 350 and need some opinions

    That car was on Ebay last week! Don't know if it sold though? You're gonna spend that much money on a car that was wrecked and then repaired. I guess you have money to burn or should I say waste!
  10. 6

    65/66 Dash and door colour code?

    Dan trying Merto Mustang or Mostly Mustang! Mostly Mustangs in Hamden, CT. That guy knows everything, and has the paint for Dashes and doors! I take it you gonna spray it on with a gun? If not you can buy the laquer paint in a can. Use laquer paint, it wont fill in the texure thats on the doors...
  11. 6

    New Photo Album

    Hey Guys & Gals, I just got done making a photo album of my ride, Take a look and tell what you think of my Stang! Yahoo, dosent let me put big photos, so that kinda blows! Might be selling her to get a 68 Cougar, hate to see her go, Got a lot of money into her and I'm sure I wont get it all...
  12. 6

    Looking to buy a 1966 GT350 or nice vert 66 K code, where to find?

    Hey, I have a 1965 Fastback that I'm going to be selling soon, so I can purchase a 1968 Cougar! Its real nice have over 20k into her, she's all stock! But is real nice, I mean real nice 289 4v 4-Speed Silver Smoke Poly on the exterior and black on the inside! I have over 60 Pictures from my...
  13. 6

    HELP ME!

    Just buy the braket to lower the power steering! I think its like $20 every Mustang vendor sells them! Takes maybe 1/2 hr to install.
  14. 6

    Front And Rear Window Moldings

    Hello all, I just bought all new window moldings for the my 65 Fastback and was hoping some one could tell me where is a good starting point? Is there any special tricks to installing them? I got all the old ones off and didnt brake any of the clips. And tips or tricks to doing this with out...
  15. 6

    The last time I ask for opinions, sorry but I need to:

    I think you should take your time and look for another car, just keep looking and I'm sure something will come up that catches your eye! Winter is coming and that’s the best time to start looking for cars, people tend to give in when it’s getting cold out! Hell, I’d look for maybe a 1969 Cougar...
  16. 6

    Torque box ?

    I know in the 67 Cougars they only had one torgue box, It was on the driver side. :flag:
  17. 6

    Interior color?

    The answer to your question would be NO, Should be the interior color. You can buy the interior paint in cans at any classic Mustang dealer. :flag:
  18. 6

    Repro Window Moldings

    Hello all, Has any one here bought a set of the Front and rear window moldings for a 65 Fastback? Hows the fit? Do they look like the orignals? Any problems installing? Need feedback :flag:
  19. 6

    Actual 2005 in a dealer.

    Where's the hood-scoop? Rims suck.
  20. 6

    Carburetor question ?

    Ok, I do have the Autolite 4100 that has been restored by Pony Carbs, My question was, whats easiest out of the Box non-factory carb you can buy with with little to almost no setup needed. I know that the 4100 is not hard to setup! I have one on my car.
Top Bottom
Back
Forums
Menu