Search results

  1. Stang8URMPRT

    Where to find this part???

    I'm sure the Auto guys can tell you, but I'm sure you can go to the local Ford dealer or Autozone or what not and they will know which ones needed for the two trans and two radiator fittings. I know the dealer will know, and if they don't have them, they can order them.
  2. Stang8URMPRT

    need a fan controller ??

    :spam: :rlaugh: Just messin'. :nice: If I didn't like how WELL my Proform controls the coolant temp, I would buy it off you. But I see no need right now for one.
  3. Stang8URMPRT

    Where to find this part???

    All you need are the correct fittings (or reuse the stock ones if you have them), and buy some stainless line. Not braided, but stainless or aluminum HARD line. Bend it yourself. And get a flare tool, or rent one from Autozone. Won't take you long at all. Good luck, bro. :nice:
  4. Stang8URMPRT

    manual brakes...not happy

    The problem is the angle at which the actuator rod from the brake pedal is to the master cylinder. The angle and location of the rod is optimized for power brakes. When you change to manual brakes, you need to modify that rod. If I remember correctly, there are two spots on the brake pedal to...
  5. Stang8URMPRT

    Autolite 3924s Arcing to the Head!

    I had one arc on me, but it was because I broke the porcelain. It was very visible and the car had a bad miss. Just a thought.
  6. Stang8URMPRT

    ASP Pulley On A 3G Alternator?

    My ASP overdrive pulley went right on, and needed no spacer or washer.
  7. Stang8URMPRT

    Another "How To Set Timing" Write-up

    :stupid:
  8. Stang8URMPRT

    New Engine Pics

    :drool:
  9. Stang8URMPRT

    trw pistons

    :stupid:
  10. Stang8URMPRT

    No Schrader Valve on my 90 LX?

    You don't lol
  11. Stang8URMPRT

    TPS voltage spike - it's not the sensor

    Do you have one of those plug in things that make the computer think it's at 100% throttle when you're only at 70%?? Sounds like that's what it is to me.
  12. Stang8URMPRT

    Bope!!!!!!!!!!1

    WTF is "hese"?
  13. Stang8URMPRT

    carbon fiber valve covers

    That's like saying people that buy 400 dollars in billet pieces and engine dress up pieces are stupid for buying it, and it could be put to better use. It's a cosmetic thing. Why do people buy Polished blowers? They're much more expensive, but it does nothing but look good. Same concept. If...
  14. Stang8URMPRT

    carbon fiber valve covers

    The guy who asked about these to BEGIN WITH wanted them because they looked cool. If you consider people that want them or have them "stupid", then you're calling every person in here that has a hood, wing, billet interior pieces, and under hood dress up parts stupid. And there are too many...
  15. Stang8URMPRT

    .544 lift with AFR's

    Cause it's a roller cam.. the ramp rate is much faster then, say a flat tappet.You will probably valve float at 5500 rpm. Def. upgrade the springs. You'll be glad you did.
  16. Stang8URMPRT

    Replacing Starter

    :nice: Glad we could be of service. :D
  17. Stang8URMPRT

    Junkyard: what cars can i find a 351w in?

    Lots of the 96 and older F-150s have 351W's in them.
  18. Stang8URMPRT

    BFG DR's: 26" or 28" for my combo?

    I had my 275.60s on some old 15X7 rims. They will be fine. Sure they'll be a little wide on the rim, but they'll look nasty! :D
  19. Stang8URMPRT

    How much gas is left in the tank when the light comes on?

    Ahhhhh! You have an 86... My 83's light would come on from about 20-30 miles before it would run out of gas... and it was a gas hog. Atleast 2 gallons.
  20. Stang8URMPRT

    How much gas is left in the tank when the light comes on?

    Probably about 1 gallon. Damn man... If paypal went through faster, I'd give ya 5 bucks to get to work. lol
Top Bottom
Back
Forums
Menu