Search results

  1. donsbad68

    rim and tire question

    It will be alittle tight, I run the 26x10.5 on a 7 inch wheel and it was close on a 9 inch wheel. The 11.50's would be a better choice
  2. donsbad68

    Squeezing out all that you can get from stock heads/intake

    99 is for sure a P
  3. donsbad68

    Help me clean my shortblock?

    Purple power degreaser
  4. donsbad68

    Squeezing out all that you can get from stock heads/intake

    yeah I ran High 11's with Gt40's and bolt ons
  5. donsbad68

    Manual steering with 5 lug swap problem

    Wrong tie rod ends, use the SN95 ends, thank you come again
  6. donsbad68

    Friction disk Question!!

    Its junk now as stated above
  7. donsbad68

    302 to 351W questions??

    82 and up 351w's are fine, enjoy
  8. donsbad68

    ARP main studs hit oil pump! help

    pics?
  9. donsbad68

    Is ford trac loc strong?

    I run a low 11 sec nitrous 306 car, we have gotten 250 passes on the 31 spline trac-lok before rebuilding. We have also only gotten about a 100 passes on the 31 spline unit before it one wheel pealed.
  10. donsbad68

    Turbo coupe axle replacement

    Thanks, We will most likely do the bracket flip!
  11. donsbad68

    Turbo coupe axle replacement

    We need a stronger axle replacement, also sorry it is an 87 rear.
  12. donsbad68

    Squeezing out all that you can get from stock heads/intake

    The parts you listed would run 12's pretty easily with tires and a good driver.
  13. donsbad68

    computer question

    Both work fine. I have ran both for years.
  14. donsbad68

    Turbo coupe axle replacement

    What can we replace a broken axle in a 86 turbocoupe rear with? Does anyone make the correct length axle or can we just use fox axles without the Anti-lock wheel?
  15. donsbad68

    Not a Mustang but still a Ford 5.0 and still need help!!

    Thanks for the help guys I'll keep hunting. It looks like its just gonna take awhile.
  16. donsbad68

    Not a Mustang but still a Ford 5.0 and still need help!!

    All fuses are hot when they should be, the noid light was a fail, I originally said it pulsed but it doesnt seem to. Fuse 19 is powered like it should be but no power at the red/lt grn wire at the coils when its in the "on" position and cranking.
  17. donsbad68

    Not a Mustang but still a Ford 5.0 and still need help!!

    No power at the red/lt. green wire at the coil, the 19 fuse is good. I hate this car.
  18. donsbad68

    Not a Mustang but still a Ford 5.0 and still need help!!

    No PAT system already checked that out.
  19. donsbad68

    Not a Mustang but still a Ford 5.0 and still need help!!

    car has injector pulse via noid light. ECU has power and OBD2 port works but doesnt give any codes that help.
  20. donsbad68

    Not a Mustang but still a Ford 5.0 and still need help!!

    Thanks for the input, where can I obtain a noid light, and if it pulses what to check next? If it doesnt?
Top Bottom
Back
Forums
Menu