Search results

  1. 53BigDog

    why wont these fit a 98 gT?

    How did they come out?
  2. 53BigDog

    Fuel Pressure Regulator Gauge

    we'll do, I bought a few different fittings, I need to get it all put together I am in the midde of a head swap. When I get it on, I will see which idea is going to work. I have 2 90 elbows that might be an easy fix or a male to male coupling and then a female to female coupling. But I will...
  3. 53BigDog

    Dead Snake Help

    Try the K I C K method. Step outside you car and kick it in its hind end! LOL - I think there is a computer reset that the dealer has.
  4. 53BigDog

    Timing Chain

    Hey need some advice. I am putting in the new heads (PI) and am to the timing chain install. I marked the chains and all and installed them easy. I went ahead and rotated the crank shaft with the chains tight to turn the cams and the pistions to see if any valve tapping or lock up would...
  5. 53BigDog

    Steeda Sport Springs vs. Ford Racing C-Springs???

    I got the Steeda and like them. Not too short, but still stiff and sweet
  6. 53BigDog

    why wont these fit a 98 gT?

    yep. Just the odometer
  7. 53BigDog

    Dead Snake Help

    I thought the car was turning over just not catching right? That would eliminate PATS
  8. 53BigDog

    Fuel Pressure Regulator Gauge

    yea going to check that out - thanks
  9. 53BigDog

    Fuel Pressure Regulator Gauge

    Ok just about to finish up the PI head swap and I am installing my BBK adj. Fuel pressure reg. I have a liquid filled gauge and where the outlet is on the reg leaves no room for the gauge because it is right next to the bolt for the fuel rail. Any one know how to solve this? A 90 degree piece...
  10. 53BigDog

    Dead Snake Help

    No spark... maybe bad coil packs? did you check the other side too?
  11. 53BigDog

    Plug Replacement?

    Most engines are pretty straight foward when it comes to plugs. Its a V6 so you should have 3 on the left and 3 on the right. You will need a spark plug socket, a ratchet, and probally a universal and extention. Make sure you check the gaps on the outs and set the gaps to the manual on the...
  12. 53BigDog

    Fuel Injectors

    Bump
  13. 53BigDog

    Fuel Injectors

    While in the process of my head swap I have pulled the injectors and fuel rail off the old lower intake and was about to swap it out when I noticed the fuel injectors are really kinda nasty. Any way to clean these. Would it be beneficial since I have them out to go ahead and replace them...
  14. 53BigDog

    Gotta Love a Clean Block

    yes dished they are. Thanks for the birthday wishes!
  15. 53BigDog

    Gotta Love a Clean Block

    Kinda doing both. I bought a headswap kit from a ford dealer with all the new stuff.
  16. 53BigDog

    98GT runs & idles rough

    Check the plug and make sure one had not raddle loose.
  17. 53BigDog

    suspension help for mustang noob

    How much you lookin to spend?
  18. 53BigDog

    Need help deciding on route to go for lowering car!

    Yea FRPP kit would be it. Or go out and price shop like I did. I did mine for about a grand. Included in the picture below are Steeda springs, Isolators, Bushings, bumpsteer kit, Pro3i Lower/Upper Control Arms, and caster camper plates. If you researched you probally could find the...
  19. 53BigDog

    Shocks???

    I what ever brand you go with (I went with Tokico Blues and Like them) do some research about the fox body style front struts. If you replace the front struts with 94+ after market they are the same size as the stock (which are high to begin with due to the change in the production line) The...
  20. 53BigDog

    IAC valve didn.t helped. Help!!!

    I would start there a loose spark plug or brittle wire can screw everything up. In addition you could alsway check your TPS (Throttle Position Sensor)
Top Bottom
Back
Forums
Menu