Search results

  1. 53BigDog

    Steeda Timing Adjuster

    as they have said.... also you will need to use 93 octane with you run at high degrees
  2. 53BigDog

    Gotta Love a Clean Block

    Here is the pass side tha I haven't done yet. 150K of carbon and oil residue. Now the Drivers side that I spent the last hour on with a polishing Roloc disc and air die grinder.
  3. 53BigDog

    Cam Tool

    Cool its on sale for $80. Better the $120
  4. 53BigDog

    Cam Tool

    Thats the ticket. I found them through OTC and Snap On for $120. you say $50 at autoparts store?
  5. 53BigDog

    Cam Tool

    Anyone have the Cam Follower Removal tool that I can rent from you?? I am trying to perform my PI head swap. Thanks
  6. 53BigDog

    Lowering springs and CC plates - they needed?

    Like :nice: said. I love the Pro3i
  7. 53BigDog

    i have alot of questions....

    Here is a GREAT article http://bossracing.net/Tech%20Articles/PI%20Headswap/PI%20Head%20Swap%20page1.htm
  8. 53BigDog

    Gauge options? (96-98)

    LOL you'll have to let me know how that works out. Good luck finding a cheap one.
  9. 53BigDog

    Gauge options? (96-98)

    Yes Crack! I would call autometer and find out. I am sure it can be done, just how much will it cost and how much work will it be.
  10. 53BigDog

    Are there any decent priced 315/17 tires out there?

    Amen - for the $$ the best bang.
  11. 53BigDog

    code keeps comming back help

    Feel around and wiggle some of the hoses see if you can hear any suction. Follow all hoses from the top intake and see if there are any plastic couplings or hoses cracked. Did you try replacing your IAC?
  12. 53BigDog

    Lowering springs and CC plates - they needed?

    Go wit the Pro3i plates, same design as the MM but cheaper. Have the fouth hole too. http://www.partshopper.com/shop/Pro3-Caster-Camber-Plates-79-04-m134.html
  13. 53BigDog

    i have alot of questions....

    You do not need to drop your motor. It is easier to yank it if you have the hoist and stand, however not neccessary. I am in the middle of my in the car swap. You have the heads but not the valve train? Have you researched the diff between the winsor and romeo swap.
  14. 53BigDog

    Help with Guages and cluster

    You can also purchase a clip peice that goes into that open hole, I have one in mine since I don't have rear window deforst.
  15. 53BigDog

    code keeps comming back help

    I believe it is your emission control vacuum tube. I sholud be a black and red vacuum line. I would also suggest resetting your computer by disconnecting the batt cable for 10+ minutes. Then upon start up let your car idle for 4-6 minutes before ding anything to it (driving, revving, etc) let...
  16. 53BigDog

    Are there any decent priced 315/17 tires out there?

    I have them and like em, definitely not as good as the nittos for drag use, but good fro street and the florida rain!
  17. 53BigDog

    Gauge options? (96-98)

    The big difference is the analog to digital odometer. I think the rest is the same
  18. 53BigDog

    tuning question

    Did you let your car run idle for 4-6 mins after the battery cable pull? You need to give your computer time after resetting it to compile the data. If you just go and drive, the computer never has time to find normal.
  19. 53BigDog

    Lug nut wrench

    +2 on the four way, each side is a different size
  20. 53BigDog

    Autometer Air Fuel Gauge Tap In - Where to Connect>>>

    I think the o2 sensor
Top Bottom
Back
Forums
Menu