Search results

  1. montyd

    f cam pushrod length?

    have edelbrock heads and an f cam with 1.6 rockers. wondering if stock pushrods will clear the pistons or not. anyone done it?
  2. montyd

    kenny brown panhard bar install????

    bought a kenny brown panhard bar and it didnt come with any instructions on how to install it. its for a 87-93 anyone know where we can find the instructions?
  3. montyd

    upr k memeber motor mount propblem

    i just put my new upr k memeber in and am putting the motor back in today and cant get the mounts to work. any suggestion?
  4. montyd

    cam bearing removale in car?

    recently put a cam in my 93, lx and knicked a bearing or two in the process, lost alot of oil pressure. wondering if anyone knows of a tool to pull the bearings outt without pulling the motor thanks dan
  5. montyd

    hci installed, need tuning help!

    been driving it for two days runs like a champ, no issues at all so hopefully it will be ok in the end. the cam is a roller cam not a tappet cam i dont know why the order is different but it all works fine and is a blast to drive.
  6. montyd

    hci installed, need tuning help!

    did some diggin on it today and got no where. finally pulled all the cam paperowrk out and looked it over really close and found that it was for a non ho motor so the firing order was off four cylinders. flipped them around and ran like a top. rookie mistake i guess. took it out and pulled...
  7. montyd

    hci installed, need tuning help!

    the maf is calibrated to 24lb came out of a running set up. i have been messeing with the dist. and timing for a couple days havent really made a whole lot of progress. will keep trying tho
  8. montyd

    Differential Removal

    i second that
  9. montyd

    hci installed, need tuning help!

    pulled a couple plugs, there black, so i have to much fuel. dont know the pressure, will get a gauge tomorow and check it out. i didnt change any of the fuel system other than the injectors. still has the stock regulator and all.
  10. montyd

    hci installed, need tuning help!

    got my hci installed. am runing edelbrock performer heads and a crane came(.512 lift) and a cobra intake. have 24 lb injectors and maf, 65 mm throttle body. got it all installed and it runs but has no power and isnt smooth after 3000. and as soon as you let off it back fires. and sometimes...
  11. montyd

    push rod length?

    the heads havent been touched as far as milling they are completely stock from edelbrock.
  12. montyd

    push rod length?

    i bought a set of edelbrock performer heads with 1.6 roller rockers and i am have a f cam to go with it. i have been told be a buddy that i need different length push rods to run this set up. doesnt make sense to me but i figured i would ask. also what is the torque spec for the head bolts...
  13. montyd

    Why does my 5.0 run like S***??

    check your vacuum lines also. had that problem more than once
  14. montyd

    Will a hood fit into the back of a hatchback?

    my 4 inch cowl went into my hatch(93) but couldnt close it little bro had to hold it haha
  15. montyd

    Seam welding?

    i would stay away from the seam welding. i am a body man and i have never known it to be a good idea. stick with the subframe connectors and that kinda stuff. get the weld in connectors to. i put them in my car this winter and what a difference they made.
  16. montyd

    Wider Tires = LESS Traction ??

    i live in the south bend IN, area and have a summer tire just like yours, had the car out saturday when it was almost 50 still no traction. its just to cold for the tires man. another couple months and you'll have good traction
  17. montyd

    cam selection help

    i am going to buy a cam to get me till next winter when i can build a real motor. just something to make my summer a little more fun. wondering if the e cam would be a direct bolt in i dont want to change my rockers for this either if i can help it. i am thinking of getting an intake to but...
  18. montyd

    belt help needed!

    THANK YOU. i have been fighting with this since before christmas thats a relief. thanks again man
  19. montyd

    belt help needed!

    You've got to run the belt slightly different when you ditch the smog how do i have to run it?
  20. montyd

    belt help needed!

    so the top bolt is just resting on the braket and not actually bolted to anything?
Top Bottom
Back
Forums
Menu