Search results

  1. TIMMY2734

    BBK Header Nuts

    pretty sure it uses a 19mm socket
  2. TIMMY2734

    ANYONE HAVE THE TFS 1 Cam Card Specs PLEASE

    http://trickflow.com/product/prfeature_index.htm Valve Setting Intake: .000 in. Valve Setting Exhaust: .000 in. Advertised Duration (Degrees): 275 intake/279 exhaust Duration at .050 in. Lift (Degrees): 221 intake/225 exhaust Camshaft Lift: .312 in. intake/.319 in. exhaust Valve Lift with...
  3. TIMMY2734

    How do you feel about GT40 iron heads on a 347???

    He'll be fine. The torque will be unbelievable. Later on down the road, he can swap the heads. Not really that big of a deal. Like the others have said, they arent exactly the first head that comes to mind when buiilding a stroker, but theyll be fine.
  4. TIMMY2734

    Mini Tubs and Coil Overs

    http://www.autoweldchassis.com/minitub.ivnu
  5. TIMMY2734

    Wiring Question…. How to make a wire hot only when the ignition is on?

    Hows your alternator working?
  6. TIMMY2734

    TRACTION PROBLEMS... Rant

    First thing id do is ditch the shocks and struts and go with something more drag oriented. Something liek the lakewoods or Strang adjustables fair very well. Do yourself a favor and get some real tires. Put a set of et streets or drags on a 15inch rim or even your stockers.
  7. TIMMY2734

    Need Next Suspension Mod Help?!?!?

    Where you are, I'd probably go for the shocks and struts. The stock GT springs really arent all that bad for launching. Find some 4cyl springs for the front and you should be fine.
  8. TIMMY2734

    replacing axle bushings

    The uppers do not come with bushings for the axle end. I used the 3/8" drill bit, like just about everyone else here does. Just drill and let it run around the outside and it'll come right out. The rubber isnt a problem at all. The metal sleeve though is a little "more fun." I had the rear out...
  9. TIMMY2734

    Some questions about my stroker plans, please help!

    AFRs arent necesarily "the best" set of heads, but they will more than do the job for you. Ed Curtis is a custom cam grinder who makes a cam specifically for YOU. Its based around your combo, your car weight, gears, headers etc etc........... A cam from him runs around 350 i believe, for a...
  10. TIMMY2734

    sc with electric water pump

    The supercharger belt is separate from your serpentine setup.
  11. TIMMY2734

    sc with electric water pump

    um... yeah
  12. TIMMY2734

    balancer question, what is 'sfi approved'

    What kind of balancer do you have? Some of the stock replacement pieces are only recomended to be revved in the neighborhood of 4500rpm. My SFI balancer cost me 220. Not very expensive at all if you ask me. And that whole deal about stuff expiring is hardly a scam. For something liek a 5...
  13. TIMMY2734

    wut lifters go with a f303 cam

    stock
  14. TIMMY2734

    What can holod more boost?? 306/331/347???

    They will all have a 4" or a 4.030" bore. The cubes come from the extra stroke in the crank.
  15. TIMMY2734

    What can holod more boost?? 306/331/347???

    its the same exact thing...... one is just 30 over
  16. TIMMY2734

    What can holod more boost?? 306/331/347???

    Doesnt matter. What does matter is your rotating assembly and your block. for that much boost, id stay 8-8.5
  17. TIMMY2734

    Big Problems after Fuel System install

    Are you feeding the pump via a sump? or is it drinking through a straw?
  18. TIMMY2734

    How did you fix your batterie in the trunk?

    the sealed box must be nhra or whatever certified, so just any sealed box will not suffice. You are also required to have a cutoff switch on the outside of your car that cuts all +current. You can run the wire inder the car along the subframe or soemthing or through the interior.
  19. TIMMY2734

    How much fuel system upgrade should I consider?

    i was referring the to what the t-rex flows....
  20. TIMMY2734

    How much fuel system upgrade should I consider?

    to use the t rex, your intank pump must flow at least the same amount as the trex, which i believe is 190lph.
View older results
Top Bottom
Back
Forums
Menu