Search results

  1. X

    Want to hit 12s in a relatively stock stang

    Finnaly dug up the June 06 issue of MM&FF. The caris an 83 turbo,with an 84 front facia. Reider racing sponsered the car back in the day..The power plant is a stock 5.0 attained for $200. The motor cosists of an E cam,71 351 windsor heads that have been bowl ported and fitted with larger valves...
  2. X

    Want to hit 12s in a relatively stock stang

    I thought I had the issue in my locker...I now know its at home..Ill dig it up tonight. I thought it was Rieder racing,but now I think it was Pro 5.0 shifters race car....Very good issue of MM&FF mosly about cheap speed. The car had a very simple combo that anyone can duplicat with off the shelf...
  3. X

    Want to hit 12s in a relatively stock stang

    Thats it...It was the old Reider racing car?? Could have sworn it had Y heads ol well,the issue is in my locker at work...Still its a very good basis for how inexpesive a race car can be built and go fast.. Kelly
  4. X

    Want to hit 12s in a relatively stock stang

    Is that the issue about the cheap speed w/carbs? If so I have that issue...I think the guy used Ford Motorsport Y heads and E cam on a stock bottom end he got out of a junk yard...Its a perfect article for you to read. Kelly
  5. X

    Clicking noise when trying to start car

    Thanks everyone for you help...It was the selinoid... Kelly
  6. X

    Clicking noise when trying to start car

    I went to start my car and went throught the usual ritual of starting and dying 3 times until it stays running. This time after the second time the selinoid just clicked. I have full power from the battery. I have one of the button wires that connects to the selinoid and the battery. I tried...
  7. X

    SN95 brakes quick question

    Heres the link I followed when I did my 5 lug..Very informative.... 79-93 5 Lug Ford Fox Body Mustang Conversions Kelly
  8. X

    SN95 brakes quick question

    Buy Ford Racing Parts!
  9. X

    SN95 brakes quick question

    Heres a great deal on Cobra calipers... wwwbuyfordracing.com Kelly
  10. X

    2.3 to a 5.0

    A search would give you quickest results...I think there is a stickey here or over at The Corral that goes into detail for this swap..There is alot to the job and a doner v8 car would make it easiest. Wiring harness,fuel lines, vaccume lines, vaccume fittings, 8.8 rear, these are just a few...
  11. X

    SN95 brakes quick question

    Thats where I read it....Im at work and dont have access to favorites....Could someone post up the link? Kelly
  12. X

    SN95 brakes quick question

    Ryan, I remember someone getting fittings that adapt the stock brake line to the sn95 calipers. I think they took the caliper and the hose to either a auto parts store or a harware store (pluming) and found fittings that would adapt the late model calipers...Try a search for 5 lug wheels..If...
  13. X

    Aftermarket Stereo Help?

    Had the same problem... Kelly
  14. X

    SN95 brakes quick question

    Maxim Motorsports sells a braided stainless steel brake line that mounts fox body to sn95 calipers. They are sold in pairs and cost about 80 bucks. Thats the route I took....Quick and easy... The part # mmbk6f Maximum Motorsports :: The Leader In Mustang Performance Suspension Kelly
  15. X

    TAURUS FAN? OR MARK VII FAN?

    10-4 on the 3 core rad...I have a stock one and had plenty of room. I cut 3/8 of an inch off of mine... Kelly
  16. X

    TAURUS FAN? OR MARK VII FAN?

    either one would be sufficient. I have a Mark 8 and it works just great..Currently I have an on /off switch while I wait for my controller to be made...As for fitment on the Mark 8 shroud...It can be trimmed quite easily with a dremmel. Kelly
  17. X

    Convertible rear speaker grill cover??

    MPS will have it...Heres a link to thier website.. MPS Kelly
  18. X

    Best 5 lug front set up?

    You can use rotors,spindles,and calipers from any model 94-2004. The only problem will be attaching the brake line..The late model calipers have a different thread pattern for the brake line. I used Maximum Motorsports Stainless Steel braided line( $80) it has the proper end that is threaded for...
  19. X

    Started a new social group for 5.0 people with ATVs

    Dont have a quad,but I like the 2 wheelers. I have a 98 rm 250 and a 06 DRZ 400 sm.. I ride the SM in the heavenly world of twisties in Western North Carolina and the RM gets ridden on alot of tracks and trails between western NC and West Virginia. Kelly
  20. X

    Started the 84 t-top coupe

    suscribing....Great thread! Kelly
Top Bottom
Back
Forums
Menu