Search results

  1. M

    Car is acting extremly weird and is undrivable Help!

    Just wanted to give everyone the heads up that my battery tested fine, It was actually the negative terminal. The wire at the tip near the negative terminal somehow burned. The bottom of the wire was showing and there was alot of crud all over them. I cut the wire shorter put new terminals on...
  2. M

    Car is acting extremly weird and is undrivable Help!

    I have checked for all possible vacuum leaks, but i have ruled that out because of the car idling and being able to hold at 4k for 60 seconds without any issues. In a few hours ill be able to test out the battery. I'll report back when I'm done. If its not the battery or alternator the only...
  3. M

    Car is acting extremly weird and is undrivable Help!

    See the thing about that is that the alternator is outputting 13.9v and 14.4v when cold. I cant see it being the alternator. Its a 200amp alternator as well. I checked with a volt meter and the power from the alternator is 14v. I checked the battery and its 12.5v The only thing i can think of...
  4. M

    Car is acting extremly weird and is undrivable Help!

    I checked all the terminals and its all on really tight. Im thinking of taking my battery to kragen to get it checked since its less than a year old and its under warranty. Could any fuse cause this? maybe the ecu? If the ecu was going bad how would one know? would it just not start?
  5. M

    Car is acting extremly weird and is undrivable Help!

    I have never come across this issue, nor know what to do to fix it. I just left campus after studding with some friends and i went to drive my car and it wont move. It starts, but as soon as i put the car in gear it dies. The car revs fine, even to 5000-6000rpms and sounds normal. The...
  6. M

    Fuel pump issues need help got stranded twice in one night

    OK I replaced my stock GT tank and hat with one from an 03 cobra. We'll i also replaced the 03 cobra pumps for SVT focus pumps. I then bought some very expensive gates in tank fuel line hose and connected it all together, and it has worked great for a couple months now. We'll here is the issue...
  7. M

    need help with vorech centrifugal supercharger anyone

    Do you have a picture of this braket i can see? Right now i used some zip ties to hold it up and it seems to be working as a temp fix.
  8. M

    need help with vorech centrifugal supercharger anyone

    Are you tightening it with a T-bold clamp? Mine slips off as i tighten it with the t-bolt, Are you saying you held it really good to where it didnt slip so you could tighten it really good?
  9. M

    need help with vorech centrifugal supercharger anyone

    Do you have a picture of this bracket and it installed? This sounds like the reason. I need to get this bracket or make one. I have an L shaped bracket for my mass air, but i thought it was for the oem vortech, maybe its the same bracket. A picture would help alot, If you or anyone else has one...
  10. M

    need help with vorech centrifugal supercharger anyone

    Actually i tried all that already. I think the issue is weight. At the bottom of the Anderson pipe is a 90 degree elbow to my mass air, then to a 9" cone filter that literally hits my front bumper. It all barley fits but fits. Maybe the weight is causing it to slip off the supercharger. I bought...
  11. M

    need help with vorech centrifugal supercharger anyone

    Maybe i am tightening it down to tight, I dono. Anyone else have/had this issue?
  12. M

    need help with vorech centrifugal supercharger anyone

    OK I have been dealing with this for 3 weeks, then i buy a new silicone intake elbow and still same thing is happening. Here's the story, Right after the Vortech head unit is the exit whole where you put your intake elbow on. We'll the one that came with the Anderson powerpipe kept...
  13. M

    Anyone use Autolite XP-103 spark plugs?

    Thanks guys, but i gave up looking. I just ordered NGK TR7IX online with 2nd day shipping. Amazon.com was actually the cheapest online after shipping.
  14. M

    Anyone use Autolite XP-103 spark plugs?

    We'll those are only 1 step colder and im currently using those. I keep getting spark blowout and The car has been rugish with them. I replaced a couple of them, fixed the rushish ride, then 3kmiles more its back. I need a better spark plug and soon. I want the iridium because there a stronger...
  15. M

    Anyone use Autolite XP-103 spark plugs?

    i'm trying to find out what the heat range is on these things. Autolight says the heat range is 3, but im not sure what stock is for heat range. Anyone running these? I'm looking for plugs that are 2 heat ranges better than stock. I know the tr7ix are, but i cant find these locally; however, i...
  16. M

    Major boost leak need help.

    I had my car tuned a month ago, and it was hitting 14psi in the 80deg weather, then when it was about 50 outside i hit 18psi. But now that its only 80 again, im only hitting 9,10 psi. I tightened down all the couplers but it didnt help. I bought an air compressor but im not sure how to make a...
  17. M

    Saleen new inlet/intake for Series II

    We'll that all depends on the dyno they use and the tune they use. I have seen some kenne bells on a non kenne bell tune reach 400hp but then again thats on a dynojet. dynojet's read 12-15% higher on the numbers then a mustang dyno. A mustang dyno puts resistance on the wheels so its the real...
  18. M

    Saleen new inlet/intake for Series II

    Except the kenne bell 2.1 has huge upgrade features. It can handle 500hp where as his saleen unit cant. He has pretty much maxed that unit out 99% but if he's happy with it then thats good. I on the other hand, decided not to go that route and im so happy i that i didnt. I was about to put 3k...
  19. M

    Saleen new inlet/intake for Series II

    HAHA i see you added my quote to your signature lol. We'll those are good gains congrats. Still not worth the money to hp ratio though. How much did it cost you total to get those numbers? was that on a dynojet or mustang dyno. Post the dyno sheet.
  20. M

    Vortech Front Mount intercooler setup

    I guess i forgot to update ;) We'll I went ahead and purchased the cxracing kit. The kit was pretty good, i had it custom fit to my car and the way i wanted. It came out really nice. The Kit works extremely well. My IAT's were barly 10* above ambient and on the dyno my temps never went above...
Top Bottom
Back
Forums
Menu