Search results

  1. R

    installing 03 cobra front a-arms.

    Yes I have stock springs and they are a pain to get back in. A big pry bar and alot of pushing finally got the spring in. I believe I'll try to find some way to compress the spring on the side I havent done yet.
  2. R

    installing 03 cobra front a-arms.

    Well I got the passenger side on this evening. It went pretty smooth only problems were I had to cut the ball joint nut off because it would just spin with the joint. Also I had a heck of a time getting the spring back in the car. Are there any tricks to getting the spring in any easier? I...
  3. R

    installing 03 cobra front a-arms.

    Yea I'll tackle it in the morning. I'll do a little write up when I get it going good and get to the alignment shop.
  4. R

    installing 03 cobra front a-arms.

    I just got my 03 cobra front a arms today. They were $175 shipped. Comes with new ball joints and bushings. Also at the same time I am planning to replace the tirod ends and rack bushings. Anything I need to know before I tear into it?
  5. R

    Car backfires when shifting.

    If you are not running cats and still have the smog pump hooked up that is the problem. Mine would pop a little when I shifted and if I shifted hard it would be worse. I removed the smog pump and that fixed it.
  6. R

    HG Help (broken bolt)

    I took my heads back off after tourqing them down. I had not started the engine though. You will be fine as long as it wasn't started.
  7. R

    Smog pump info

    You can just buy a longer belt and run the AC and leave the smog pump off. I run everything except the smog and with underdrive pulleys I use a 89.5 belt.
  8. R

    pulley kits..

    Yep pretty easy job just don't get in a big hurry and bust a knuckle.
  9. R

    Should I get the upgraded front controll arms?

    thanks saved me big. iou one
  10. R

    Soooo....Whats your mileage???

    my 94 has 154,198 miles but recieved a balance and blue print at 48,000 miles due to crushed lifter. While My 88gt only has 132,000 miles no performance parts at all bone stock down to the silencer and even has a paper air filter
  11. R

    Should I get the upgraded front controll arms?

    Thanks alot I guess I need to find a dealer with them in stock and at a descent price.
  12. R

    Steam or smoke, that is the question...

    My car does the same thing only when it's kinda cool out but goes away after the car warms up good. It started that about 30,000 miles ago so I would not worry If I was U.
  13. R

    Should I get the upgraded front controll arms?

    I don't have any other suspension mods at all. Will the updated controll arms cause my front alignment to be way off. What I am saying is, will my NAPA service center be able to align my front end correctly without me getting adjustable caster and camber plates? I don't want to put the arms...
  14. R

    high temp and AC runoff

    just some useless info but my car gets cooler when I turn the AC on. It usually runs around the R then when the AC is on it stays between the N and O.
  15. R

    Should I get the upgraded front controll arms?

    My car is in serious need of new ball joints and front a-arm bushings. I plan on putting new tie rod ends on as well while I am in to it. I noticed that ford racing has new updated controll arms for sale for around $200 bucks a pair. If I get new bushings and joints I am looking at a little...
  16. R

    Rear End Girdle

    Not if you have your own lift. :lol:
  17. R

    Who has a Trickflow Street heat?

    Installed mine and noticed a difference but as usual I Installed heads at the same time so together a big difference. Yes you need felpro 1250 gaskets.
  18. R

    Disappointing performance after installing 2-cat X-pipe!

    It's hard to compare the performance of a car at the track after an entire year. It's impossible to have the exact same conditions two days apart let alone a year. the only way to correctly compare the x pipe, is to put the stock pipe on and run, then switch straight to the x pipe and run the...
  19. R

    So is a comp 2031 cam good for my p-heads?

    Yes it will work.
  20. R

    FPR question and comp question

    The fuel pressure regulators are different but maby you can use the fuel rail off the fox car and then the regulator would work. Also the computer will not be just a straight plug and go. You will most likely need an adapter harness often referred to as a performance improvement harness. Or a...
Top Bottom
Back
Forums
Menu