Search results

  1. 2

    How old is everyone???

    25..
  2. 2

    Cooling System Problem..............

    Still need help......How do I get the air pockets out of the coolant?
  3. 2

    Cooling System Problem..............

    ^It just started after I changed intakes. Do I bleed the system like TripleBlk said by taking the cap off and letting it run? About to give that a try.......
  4. 2

    Cooling System Problem..............

    I know how to get to diagnostic mode but which one is the temp?
  5. 2

    Cooling System Problem..............

    UPDATE: Ok so here's the deal, as long as I'm moving the temp hand stay's normal but if i'm in stop and go/stop light traffic the temp will start going up. but once I start moving again it goes back to normal after a while. My cooling fan and everything is working but my dad seems to think that...
  6. 2

    Is this a good price?

    check these out http://www.arkansasonline.com/class/classP.asp?c=2__%25&s=mach+1&Day=T&Search=Search
  7. 2

    Are Cross Drilled and Slotted Rotors worth it?

    So since I have 18x9 Bullitts up front I won't Be able to do the cobra conversion?
  8. 2

    Cooling System Problem..............

    Ok, I coulda swore that my gauge use to be a little before the middle before I changed the intake, guess I was mistaken. Also today on the way home from work my temp hand was 3/4's the way to running hot by the time I got home. From work to my house is about 30- 40 minutes and it was 95-100...
  9. 2

    Cooling System Problem..............

    Ok, so I just replace my factory intake with the upgraded factory intake and now it seems my car's operating temp is higher than usual. What's normal operating temp? There seems to be no leaks or anything. The temp hand has been in the middle of the gauge every since i changed the intake. Is...
  10. 2

    Something to check out: 5.4 swap website

    So if i did this swap could i use the same engine mounts & CPU from the 4.6?
  11. 2

    calling all BLACK mustangs!

    ^^ I went with the 18x10 and they are still slightly tucked, thinking about a spacer but prob wont do it though. Thode wheels a re called Beyond right? I may look into getting some. Do you have anymore pics of your car at different angles? BTW where can iI find the MUSTANG inserts you have on...
  12. 2

    calling all BLACK mustangs!

    I wanted those wheel so bad after I saw them in an issue of MM/FF. But when I couldn't find them any wider than 9inch I went with the Bullitts. Where can I find those inserts? [
  13. 2

    Long Tube Install help........

    ^^thank you very much, i think i'm ready to tackle this this weekend. just a few more questions, I need two capacitor's and resistor's right? I Can get these at any of the local parts stores? I'm also putting another tranny in, which should be done first taking out and putting in the new tranny...
  14. 2

    Long Tube Install help........

    Can you explain how to do this a little more? Also, would the stock bolts work with these Headers?
  15. 2

    Long Tube Install help........

    I bought a set of BBK longtubes used now I need to know what else I need to buy for the install. I know I need gaskets but do I also need O2 Simulators, and Oxygen Sensor Extension Harnesses? My car is a 2000 Mustang GT Automatic.
  16. 2

    Who here's stang is a dd

    Mine is DD, bought it in july of 04' with 69,669 on the clock now has 139,345 on the clock. I think it still looks pretty good:D
  17. 2

    will my rims fit?

    pics please
  18. 2

    reccomend lowering springs?

    Pro-kit
  19. 2

    The New Mustang?

    The tail lights have been photoshopped, I'll post the pics with the orginal lights when I get home.
  20. 2

    My Car Hit 100,000 Today

    my 2000 gt is sitting at 126,000, i also plan on seeing 200,000.
Top Bottom
Back
Forums
Menu