Search results

  1. M

    One Sneaky Picture

    actually the tires have 3/4s the tread left, they just have wide shoulders
  2. M

    One Sneaky Picture

    The wheels are standard Ford Racing C58's, so 17x9 with 24mm of offset, and I used sn95 axles in the rear with 96+ spindles up front. Im planning on running 17x8 99 cobra wheels, which have the same offset as the bullitt's, and those fit perfectly when I test fit one. The first picture is of...
  3. M

    One Sneaky Picture

    Yea I was kind of surprised by the feedback, but its all good I know the car is far from finished. The cobra r's are not staying on, they are too wide and stick out everywhere, especially with 275/40s. The board brake is because I haven't bled the brakes yet, so the parking brake still doesn't...
  4. M

    One Sneaky Picture

    yea the cardboard box made quite the improvement in my 1/4 miles times. I guess that small pictures doesnt help make the differences noticeable. Maybe these pictures will look a little better!
  5. M

    One Sneaky Picture

    Here is one new picture of my car, after a good bit of work. The last pictures of my car seen is the one in my avatar. What you guys think? P.S - the wheels and tires on there are not staying, even tho i think they look great, i will be selling them and getting some 17x8's, the 9's are just...
  6. M

    GT Brakes Question

    Doh thats sounds like the same setup I have, i got the front spindles/hubs/calipers and rotos off of an 03 cobra. Let me know how the swap goes, the M/C doesn't look too expensive at least.
  7. M

    GT Brakes Question

    That link was perfect, thanks. I am running cobra brakes front and rear, and have the booster and m/c out of a 95 GT. My engine is completely stock right now except for a full exhaust, so it pulls 20 inches of vac at idle, so I'll see how hard the pedal is, i can always change out the m/c if...
  8. M

    GT Brakes Question

    I got the master cylinder/booster off of a 95 Mustang GT. The Master Cylinder has Bendix inscribed on the end of it, is that normal? Also, is the GT booster the same as the cobra booster from the M2300K package? This thing is huge haha. Also, does anyone have pictures of where the mount for...
  9. M

    window switches keep getting fried

    It would be this little guy, nice and easy to get too as long as you have not hidden your starter relay in the fender.
  10. M

    Similar Rims to the M179's

    I think they have been starting to make wheels in 17x9 with 36mm of offset for the newer mustangs, 05+, I'm not sure how they match up hub size wise, but they would also seem to fill that need.
  11. M

    Rear Disc brake Q's

    roger, sounds like a plan! From what I was looking at on the stock handle, the range of adjustment looks small, so i think that may also lead to the problems. I may experiment with keeping some sort of self-adjuster in the handle. I will let you guys know how it does, or most likely doesn't...
  12. M

    Rear Disc brake Q's

    The mods to the handle are so that rear disc brakes can be installed, however I am wondering why the self-adjustment mechanism is defeated in the stock handle so that a manually-adjustable cable can be used. Is it because the spring in the stock handle is too strong? Then couldn't it just be...
  13. M

    Rear Disc brake Q's

    I know alot of people on here have converted their foxes to rear disc brakes, and done the mod to the e-brake handle. I was wondering if it would be possible to use the e-brake handle out of a newer mustang. I looked at one recently and they looked to share the same bolt pattern.
  14. M

    Code 94/44 Problems

    Ive read over that list probably 10 times hoping im missing something LOL i wish it was that easy... The only thing i can think of now is there is a check valve that screws onto the tube that goes to the heads, and I had to change my out with a napa one because it was leaking... Maybe its...
  15. M

    Code 94/44 Problems

    This is starting to drive me crazy... I ohm tested both wires back to the computer, they test good. The TAB solenoid sees +12v and ground from the computer whenever i check it, and vacuum is applied to the first valve which lets the air flow past it. the TAD solenoid usually sees +12v but no...
  16. M

    Drum brakes noises

    Yea i replaced the self-adjusters, and the brakes are in spec. Two or three clicks up on the e-brake will hold that car in place usually, and the balance feels pretty good on the brakes front to back (as good as drums are going to feel). Im really baffled by this noise.
  17. M

    Drum brakes noises

    I have the stock drum brakes on my 91 mustang, however I have changed all the springs/hardware, and the shoes, however when coming to a stop, i can hear a clunking noise coming from the rear brakes, which seems to speed up/slow down relative to the wheel speed. Could this be the master...
  18. M

    A/C woes. Help!

    I would also like to know if that compressor could be purchased and made to work outside that kit. I believe that there are brackets included in the kit. My car is converted to r134a and it blows cool, but not cold.
  19. M

    Fuel Slosh Module Q's

    when I switched my clusters back to my autometer/Florida 5.0 cluster, i studied the back of the stock cluster, and mapped out the wiring for the slosh module. I uploaded a picture (crappy, sorry), that shows how I wired it up, and it works great!
  20. M

    Code 94/44 Problems

    Shortly before I pulled these codes, I had an egr/throttle body gasket fail, which applied vacuum to the cooling system and sucked all 5 gallons through the engine. I have fixed that problem, however now I seem to be having problems with code 94/44. I checked the TAB/TAD solenoids, and both...
Top Bottom
Back
Forums
Menu