Search results

  1. Psydwaze

    How much to resurface a flywheel?

    About $30
  2. Psydwaze

    Dropping transmission questions

    I'm replacing my clutch this weekend. When pulling the tranny, do I unbolt the transmission from the bellhousing or just unbolt the bell housing and remove all at once?
  3. Psydwaze

    What do you think of CHP motors?

    DSS is another good option.
  4. Psydwaze

    advancing timing, need some clarity

    Ya, well however you want to put it. Either way you say it, its the combustion event occuring too soon. Thanks for the 'correction'.
  5. Psydwaze

    What are good shocks to use on Classic Mustang?

    There's a new high end option available now. VariShock Bolt-Ins Here is a link to the data sheet. (PDF)
  6. Psydwaze

    GT40 crate motor w/ flywheel

    I called Ford Racing and it does ship with a flywheel. Replacement available for about $120.
  7. Psydwaze

    advancing timing, need some clarity

    The other part of advancing the 'timing' is at which point of the piston movement the actual combustion happens. The closer you can time the piston being at the top of its stroke or just before the top of its stroke the more effective the combustion is going to be. Detonation or pinging is when...
  8. Psydwaze

    advancing timing, need some clarity

    When you advance your timing your idle will also increase. If you have not already installed the IAC spacer idle adjuster thingy, you will have to adjust the idle at the throttle body then dial in the throttle position sensor (TPS). The Idle Adjuster plate/spacer is only about $20 from your...
  9. Psydwaze

    GT40 crate motor w/ flywheel

    Does the GT40 crate motor come with a flywheel?
  10. Psydwaze

    More Money than Brains Club!

    Not a Mustang but this car could use a big giant wing and I wouldn't consider it ricey. (62MB avi, but well worth the download. :nice: )
  11. Psydwaze

    More Money than Brains Club!

    That's not rice. That's a Mustang on steeroids. More and more of these modernized, trans-am inspired racecar/toys are being built every year and it just pushes the envelope of the hobby that much further. More power to them.
  12. Psydwaze

    TCP Coilover Advisory

    The bit we are supplying removes the entire surface of the spot weld, unlike a broach type bit that cuts around the outside. This leaves a 3/8" hole in the spring seat and a scored area on the actual shock tower. The parts can easily be realigned and tack/plug welded back into place. It would...
  13. Psydwaze

    TCP Coilover Advisory

    In my six years of working with the TCP product line, I have not seen a failure of the upper mount but agree that the previous design when not torqued to proper specifications could lead to potential problems. The '67-'73 mounts use a carriage bolt seated in a slot which is the primary area of...
  14. Psydwaze

    2004 Mach I computer chip ???

    I looking for info for a friend of mine and I'm more well versed in 5.0 circles. She just picked up a '04 Mach I (manual transmission) and was looking to install a performance chip. Is there a 'chip' or are just programmers available for the later cars? Is this worth doing for a basically...
  15. Psydwaze

    TCP Rack & Pinion

    "TCP Rack & Pinion" thread I know just what you mean. Our '67 shop car was very touchy especially on the highway. If you have very low miles on your rack, it will break in and become more comfortable to drive. Otherwise you can back off the set screw adjustment just a touch to add a tiny bit...
  16. Psydwaze

    Differential choices...

    Mods are listed in sig. It's time to replace my worn out Auburn unit but I'm not too excited about spending the money to replace it. Can the stock traction lock be used and how is it for power handling and reliability?
  17. Psydwaze

    Which short block?

    I think the most popular options are: DSS Racing and Coast High Performance I'm in the market for a decent short block also. I did come across this shop also Larry's Performance but I'm not sure what kind of work they do.
  18. Psydwaze

    has anyone put a 32v 4.6 in a fox body

  19. Psydwaze

    Supercharging a 5.0? Pros and cons.

    Do not buy a Powerdyne blower.
  20. Psydwaze

    Powerdyne BD-11A repair

    Well so far I have three of the bearings out. I used the tools shown below, both purchased at Harbor Freight Tools. Small Bearing Spliter - $12.99 Bolt Puller Set - $9.99 This one isn't mine but this its current state. I think I should be able to set up the bolt puller in a way to pull...
Top Bottom
Back
Forums
Menu