Search results

  1. Dothang67

    Headlights: H4 and projector lights question

    did you bought the housing and the h4 bulb in the same place? im going to the states this next weekend so i can check out an autozone or pepboys, but do they sell both things?
  2. Dothang67

    Headlights: H4 and projector lights question

    Thanks for the info Bottlefed, when I made a search about this in the forum I find someone telling buying real HID for $600, so I never believe these lights were HID. But do these ones improve visibility over stock ones? because of the H4 bulb?
  3. Dothang67

    Headlights: H4 and projector lights question

    For all of you guys that are running H4 bulbs with projector housing(?): Besides the relays you need to install to protect the wiring, is there any other modification needed? Does anyone has use any these? How do they worked...
  4. Dothang67

    Has anyone purchased and installed these 3 point seat belts?

    I bought mines about 2 months ago from here: http://wescoperformance.stores.yahoo.net/hardtop-convertible-seat-belts.html they are $75 each, with hardware included, and their webpage it saids that the have Federal Motor Vehicle Safety Standards approved. you should check them out
  5. Dothang67

    Boss 302 stripes on a 66 fastback? am I crazy? any one with some photoshop skills?

    its kinda crude, but i hope you get the picture: <a href="http://photobucket.com" target="_blank"><img src="http://i54.photobucket.com/albums/g81/Dothang67/DSC00034-BOSS302.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
  6. Dothang67

    water pump removal?

    when i replaced mine some months ago i had to removed the water pump with the pulley because i couldnt get it off. When it was out, as the others said, had to give it some whacks until it pop off. off-topic question: where did you get that rad?
  7. Dothang67

    clearcoat wheel stripper ?

    just buy some metal polisher. my wheels had a strong greyish coat when i bought the car, and after two hours of cleaning them with a metal polisher i could finally see they were chrome :)
  8. Dothang67

    FAQ's - Please read and contribute

    :rlaugh:
  9. Dothang67

    Fire and Ice

    :D i did the same last week. its very impressive the work you do, and as everybody else im looking forward to see the success of this project. congrats Andrew
  10. Dothang67

    coil overheated?

    when it dies, do I just unplug the coil lead and check it? or do i need to disconnet tha battery or put the key in certain position.. if the resistance do drops, what exactly does it mean?
  11. Dothang67

    coil overheated?

    Im having problems with my stang. yesterday was the third time it died while i was driving, i suppose it wasnt getting gas, but it was. so my dad thought it was more of an electrical issue, we started it again and we notice the coil was very hot, after a while if died again. Today i changed the...
  12. Dothang67

    289 Stroker Kit

    Sorry to hijack the thread, but: What are you thinking for your rebuild 68rustbucket? im starting to sketch a plan for basicaly the same purpose as yours with a 289
  13. Dothang67

    Python 700 Alarm system

    i dont know much about alarms, but when some guy installed mine, a clifford 600, he mentioned that those "restrictions" where for some functions of the alarm, like starting it from the remote or disabling the starter if the alarm is armed. so as far as I know, you can install and program all the...
  14. Dothang67

    extra plug? in 67 ign switch

    thanks. i did a test with the multimeter and it seems that it doesnt get continuity in any position of the key so i will leave it blank
  15. Dothang67

    extra plug? in 67 ign switch

    I just bought a new ignition switch, but when i was about to connect it i notice is has an extra plug, do you know what this is for? or what do i need to conect in there? the one im talking about is the one that is outside the plastic wall: <a href="http://photobucket.com"...
  16. Dothang67

    1966 Resto Project - Stage One - I6 Engine

    broken bolts are a PITA, I spent my last weekend :bang: drilling a pair of bolts from the plate of the hinge in the door. eventually i learned to wd40 everything one night before from working on the pieces
  17. Dothang67

    setting the float level ???

    Yes, you need to hold down the tab, and then measure the height of the float in relationship with the "top" of the carb. You need that small L ruler the rebuild kit came with. Check step 22: http://www.advanceautoparts.com/english/youcan/html/pht/pht20020301cr.html#
  18. Dothang67

    Door hinge & plate

    I made a research and I find useful information, but I still have some questions. I read this webpage: http://www.desertmustangs.com/1972coupe/Hinge-Rebuild/72-Door-Hinge-Rebuild.htm but I find that the pins I have (new ones and old ones) doesnt have a "top hat", just the ordinary flange, 1)...
  19. Dothang67

    where to get these gauges?

    Thanks Keith
  20. Dothang67

    where to get these gauges?

    Im looking for that oil, water and fuel setup. (I copy this pic from a thread started by washMO66) Thanks <a href="http://photobucket.com" target="_blank"><img src="http://i54.photobucket.com/albums/g81/Dothang67/666-4-06010.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
Top Bottom
Back
Forums
Menu