Search results

  1. M

    Belt tensioner pulley Help?

    To add. As far as autozone and advance are concerned on parts. You have 2 different pulleys to choose from. 1 is plastic and 1 is some kind of metal. Just an FYI. I just recently last week had to replace my idler pulley
  2. M

    Which ground is for the alternator

    "Any car that has a 3G or high output current alternator needs a 4 gauge ground wire running from the block to the chassis ground where the battery pigtail ground connects." Now I guess this might be a dumb question. I know we have a engine ground strap and a few other grounds like the...
  3. M

    Anyone Have This Tire? Nankang NS 2

    What is your price range. There a ton of good tires in the $150 range. I just paid around $168 a tire for some of the best tires I've ever owned. BFG KDW'2s BFGoodrich g-Force T/A KDW 2 . Don't skip out on your Mustangs tires just because its a weekend warrior. The time or mileage you drive on...
  4. M

    Exhaust help!

    If your on a budget and want good sound and quality without paying that $500 catback price and $400 x-pipe price than..... Have 2 chamber flowmasters welded in. I think around $150-$200 for mufflers and labor/welding and get a VRS/UPR or Pypes X-pipe. All 3 are priced cheaper than the...
  5. M

    What Battery are you guys running

    A person only needs a expensive ass Optima or something in the $150-$200 range if your running your battery with the engine off for long periods of time. Otherwise there is no need or benefit from a **** Optima battery. A big 3upgrade will do more for a cars charging and battery than anything...
  6. M

    Any tips to replacing License Tag Bulb ?

    Cool, appreciate it.
  7. M

    What Battery are you guys running

    NAPA Legend. Good battery for the less than $100 range. I've always loved NAPA's stuff
  8. M

    Any tips to replacing License Tag Bulb ?

    1 of the bulbs that shines on the license tag went out on me. I'm not sure how to pull the bulb or housing out. The 2 screws are the plastic push in type crap and from inside the trunk its a little cramped and they just spin and spin. I'm not sure how to pull the bulb out or if I need to pull...
  9. M

    How to check struts/shocks for failure with stiff springs

    Appreciate it yall
  10. M

    Will the 2Point Mach 1 Strut Tower Brace fit a 03 GT

    Talked to American Muscle cause I know they'll get back to me the day I email them. They said they don't see a reason why it wouldn't fit but they have never test fitted one on a GT. An FYI. the Mach 1 2 point brace goes under the ram air scoop not above it. Seems to be level almost a...
  11. M

    vrs x-pipe opinions

    Definately a nice pipe. Same quality as the rest of the companies out there. Just not a BIG name for advertising reasons. You can choose between stainless or aluminized. Much cheaper too. VRS also makes UPR's pipes. You won't have any fitment issues either. The only reason I have a Pypes catted...
  12. M

    Are underdrive pulleys worth it?

    If your gonna stay a bolt-on car definately worth it. You can find Steeda pulleys for $150 if your try hard. You can install them yourself. I would advise against installing the alternator pulley. It just limits the stock alternator to much. The waterpump and crank pulley are definately worth...
  13. M

    How to check struts/shocks for failure with stiff springs

    I know the test on pushing down on the car at the points where the struts or shocks are. Or pulling up and releasing but I have Eibach Sportlines and the car barely damn moves when I try that. I have 46,000 miles on my 2003 Mustang GT. Eibach Sportlines on since day one and still on stock...
  14. M

    Where is the factory ground for the rear amps ? Best grounding ?

    For my aftermarket amp. I'm using a ground under the seat because I removed the seat belts and seat belt brackets with the rear set delete. Not sure if this is the best grounding point. My ground is unpainted to bare metal and tight. My amp is mounted on the back of the passenger side where the...
  15. M

    Help with removing the Mach system

    On my Metra harness which actually is 2 harnesses. The speaker wires from the wiring harness just go straight into the factory wiring harness. Deleting or keeping the factory amps isn't going to be an issue with sound. The head unit is still gonna send a signal to the speakers. Hes getting a new...
  16. M

    Will the 2Point Mach 1 Strut Tower Brace fit a 03 GT

    I want a strut tower brace but I absolutely hate the look of the 4 point braces on our cars. Can't stand it. I know of course a 4 point is better than a 2 point strut tower brace. Is there gonna be a fitment issue with the 03/04 2 Point Mach1 strut tower brace on my 2003 GT. Thanks Josh
  17. M

    Left rear caliper grinding against rotor ????

    This is just an update. I had the car fixed but delays with the Snow Storm that hit the east side of the country. The caliper bracket was frozen. That was the issue. Went ahead and had the shop put in break pads and resruface rotors. The C-Clip and Axles were fine. Guess it was just one of those...
  18. M

    What tire pressure do you run in the winter ?

    Yeh currently have Khumo MX's on the car but there warn out. I have a set of BFG's KDW2's in my carport ready to get put on. BFG finally came out with a 275/40/17 in the KDW 2's so I jumped on it. I know there still a summer tire but should act better than the Khumo MX's. MX's were a great...
  19. M

    Need help with tires/rims please give advice

    Nitto has a new drag radial called the 05r and a standard 05 they are both probaly better than the 555's or 555r's. I've used and owned Nitto 555R Drag Radial and there are much better dr's out there. Josh
  20. M

    Max power on stock PI heads?

    You get what you pay for. Patriot for the longest had the biggest quality control problem. They may have worked on fixing that. But if you gathered a survey of all the popular heads and asked out of the group who had problems with their heads the majority will be Patriot heads. Just an FYI, is...
Top Bottom
Back
Forums
Menu