Search results

  1. B

    Lumpiest cam with gt40p setup?

    So what most of you guys are saying is that there is no way of getting 10:1 with stock bottom end and gt40p's? I simply cant afford pistons right now but like i said i will be doing rings and bearings when i do the heads and cam. I just want to know if there is any way possible to get 10:1...
  2. B

    Lumpiest cam with gt40p setup?

    ttt
  3. B

    What is the best bang for your buck shifter.

    Alright it has heavy duty adjustable stops and it has 2 springs on each side of the pivot ball in the housing. If you remove one fo them you can get a "softer" shifter feel and if u add it you can get a "harder" feel. I paid $29 for the shifter minus the stick and ball. Im having my buddy...
  4. B

    What is the best bang for your buck shifter.

    dammit i just bought a hurst on ebay...are they really that bad? I think the chrome stick roped me in cause i dont like the look of the leather boot. Is it usable for street driving 99% of the time? I got the one with the adjustable springs for harder/softer shifter feel? Sorry to interupt...
  5. B

    what kind of plug wires

    I got the blue frpp 9mm for 39.99 from jegs. No problems and they look sweet. :nice:
  6. B

    Lumpiest cam with gt40p setup?

    Stanglx, are you usuing these special stock replacment pistons or no? Ur setup sounds like what i want to do with the exception of the stock cam. Id like to use a b303 or a tfstage1 . Will i still maintain the 10:1 with the bcam or tfs1? How much did a shop charge u to mill the heads? I am...
  7. B

    Lumpiest cam with gt40p setup?

    Lots of info there giddyup thanks. If i shouldnt mill the heads to get around 10:1 with gt40ps, how can i get it that high? Different pistons? Thanks
  8. B

    Lumpiest cam with gt40p setup?

    ttt That sounds pretty mean daren. Its a real rough idle but not a whole lot of lope. Is that a supercharger i hear in the backround or is it a gear drive?
  9. B

    Lumpiest cam with gt40p setup?

    ttt
  10. B

    Lumpiest cam with gt40p setup?

    Well as far as it being a 5speed cam, I am doing a 5speed swap at the same time Im doing the engine work so there isnt a problem there. It will only come out to 9.2:1 cr? I was hoping for a lil higher. Can i mill the heads to run say around 10:1 with no piston to valve clearance inssues...
  11. B

    Lumpiest cam with gt40p setup?

    Whats a reasonable compression to run with these heads n/a and stock bottom end that is freshened up with new bearings rings oil pump and timing chain? If i just bolt them on without milling, what compression will i come out with?
  12. B

    Lumpiest cam with gt40p setup?

    Can anyone who has a gt40p setup post their combos. I want a real lumpy idle but not hurt down low performance too much. I was thinking b-303 with 1.7rr. Please keep the "dont do it for the sound "and the "alphabet cams suck" replies to a minimum. Everyone knows the b303 sounds mean and...
  13. B

    Will GT40 Ps work with MAC 1 5/8" shorty headers? PLEASE HELP!

    On this subject what exactly is different about the position of the plugs? CAn anyone post a E7 pic and then a gt40p pic for comparison? Anyone know if they will work with flowtech 15/8 shortys?
  14. B

    Can thermactor passages be drilled...

    Arite i will ask him soon if he can drill them but i will need to know where to drill to. There is just one tapped hole in the back of the head that goes to the rear exaust port only? if somone could explain that would be excellent. thanks
  15. B

    Anyone with H/C/I on a high milage engine?

    Sorry dont mean to hijack this post but i have 2 question. How do you do a leak down test? and second, Is a trickflow stage 1 cam a decent daily driver cam? Its just my summer car.
  16. B

    Can thermactor passages be drilled...

    Can thermactor air pump passages in gt40p heads be drilled and tapped by an ordinary machine shop? Or does it have to be an automotive machinse shop? I have a friend with a machine shop and was just wondering before i ask him thanks
  17. B

    Some questions about strokers

    thanks ttt O btw one more question....what is a good compression ratio for the combo i mentioned? How do you come out with ur compression ration... pistions and heads right?
  18. B

    Some questions about strokers

    I was just looking around on ebay and came across some 331 and 347 stroker cranks and few full stroker kits. I know that they increase the stroke of the piston to increase displacment. I have a few questions tho 1. Is there a setup where you can just buy the stroker crank and use the stock...
  19. B

    Economical rebuild ? Need a guide

    When i pull the tranny for the aod - t5 swap im thinking about pulling the motor too and freshen it up. It doesnt smoke to speak of but it does have 180k miles. Do i even need to rebuild the bottom end or should i just do the h/c/i? I would take the engine out myself and tear it down to the...
  20. B

    What T5 rebuild kit to buy?

    I am in the process of gathering parts for a aod - t5 swap. I have a tranny that needs to be rebuilt. It grinds from first to second i was told and eveything else is ok. I was wondering what rebuild kit to buy. There is a master and regular im guessing. I see both on ebay and ddperformance...
View older results
Top Bottom
Back
Forums
Menu