Search results

  1. GearHd6

    having a little backlash noise with new 8.8

    Try leaving the rears on the ground and jack the front up, throw the tranny in neutral and see how much you can turn the driveshaft each direction. Thats a much better gauge of backlash.
  2. GearHd6

    having a little backlash noise with new 8.8

    I wouldnt think your old axles with just 65k on them would be causing you any issues. When you're spinning the tires are they both moving an equal amount or is just one side moving? You dont want to be mistaking spider gear movement for ring gear backlash.
  3. GearHd6

    good tire size for 15x8 draglite??

    This is a buddies car with 275's and 4.5" backspace: The same car with 275's and 5.5" backspace:
  4. GearHd6

    good tire size for 15x8 draglite??

    What back spacing do you have on those wheels? If they're 4.5" backspace then you'll have trouble with the tires rubbing the fender lip with the 275's. If you've got 5.5" backspace the 275's will be REAL close to hitting the stock fender lip also. I run 5.5" backspacing with 235-60's and my...
  5. GearHd6

    install issues w/a rebuilt AOD need help

    Yep, exactly what he said. The converter has to spline onto a few sets of splines on the tranny, you may have only engaged 1 set of splines so far. Spin the converter while pushing it in slighly. You should feel it fall into place.
  6. GearHd6

    check out my new wheels i bought!

    How wide are those rear wheels?
  7. GearHd6

    My new exhaust (soundclip)

    Yeah sounds bad A$$!
  8. GearHd6

    Exhaust Clip..

    Wow... Yeah... sounds like an exhaust leak or its running on 7 cylinders to me. Did all your plug wires get pushed on fully?
  9. GearHd6

    Where was that thread about the LS1 swap into the mustang???

    Thats a real sweet concept, it looks real good. I LIKE IT! :nice:
  10. GearHd6

    Exhaust soundclip

    Sounds good!
  11. GearHd6

    My Engine build thread

    Get it in the barn.......? HAHAHA! Now thats a good one. Cant fade that tractor paint!
  12. GearHd6

    Sickest sleeper ever. Period.

    Oh come on, its just a 250 ci 6 cylinder :rolleyes:
  13. GearHd6

    Sickest sleeper ever. Period.

    I'd have to agree with that. :hail2: :jaw:
  14. GearHd6

    brittle vacuum lines

    I use the hard plastic line, just heat them slightly with a hear gun to put in nice bends. Looks way cleaner than a ton of floppy slices in my opinion.
  15. GearHd6

    paypal issues, chime in guys, i need help!

    I believe you have to wait in order to make the bank account active. PayPal makes 2 small deposits into your bank account, when those deposits post to your bank account you log back into PayPal and punch in the two small amounts deposited.
  16. GearHd6

    Any 1 from Massachusetts

    Try www.NEBOC.org They're mostly just south of Boston but they move around the state quite a bit. If you're looking for a NEBOC forum go here: http://www.mcrparts.com/forums/forumdisplay.php?f=23
  17. GearHd6

    Those with King Cobra Clutch-

    I've got the King Cobra and the pedal is a little stiffer than i'd like in town and traffic. Just normal rowing through the gears its alright but when you have to sit a while and hold it to the floor its sure noticable.
  18. GearHd6

    Installing A 10 Point Rollcage!!!..

    I 2nd that. I was looking at those kits and they're simply awesome. You'll pay a little more for them but its well worth it. They fit so nice you'd think it was factory. :nice:
  19. GearHd6

    Possible combo for my winter build with questions...

    Guess not!
  20. GearHd6

    Battery cut out switches??

    And there it is. Jrichker made your search easy, hes the man!
Top Bottom
Back
Forums
Menu