Search results

  1. wildmandave

    need 95 tfi module

    I used to go to biff burger on friday night but I work on friday night now so I won't be there for a while.
  2. wildmandave

    Copule of questions (steering, fuel economy)

    Replace the rack. Mine had the same problem all over the road and the rack leaked anyway so I put a new rack in and it drove like new and was much quieter.
  3. wildmandave

    need 95 tfi module

    Thanks man that was the ticket! 45.00 and I'm good to go. Now I just hope thats the fix. I talked to ford and msd and thats what they told me.
  4. wildmandave

    need 95 tfi module

    Does anyone know where I can find a TFI module for a 1995 Cobra? It mounts on the fenderwell not on the distributor and all the parts stores say it mounts on the dist. and call me crazy. I know they are wrong but no one seems to know what the hell I'm talking about. :bang: :shrug: :damnit...
  5. wildmandave

    Here we go AGAIN.....

    Looks like it's time to hunker down again. Man these canes suck!!!Could be worse look at New Orleans.
  6. wildmandave

    no spark-good coil 95 cobra

    Installed all new parts at the same time this has been a project over the last 2-3 years. I bought the car as a basket case (no motor,no trans.,blown diff.,good body & interior). the only part on the ignition I reused was the TFI module.
  7. wildmandave

    no spark-good coil 95 cobra

    I have a brand new MSD pro billet in the car already and it only ran for about 30 minutes before I shut it off to check things out(new engine) then it wouldn't start again.
  8. wildmandave

    Sorrily sold my Mustang

    GM traitor! I've wanted to buy a new stang so badly but then there's this thing called money. O well I guess it wasn't for you. See you broke down on the side of the road. FORD RULES!!!!!!!!
  9. wildmandave

    no spark-good coil 95 cobra

    Question: how am I going to get spark at the distributor and spark plugs if theres no spark at the coil? Just so you know I have a remote mounted TFI on the passenger fenderwell. And I cant find anyone who tests TFI modules so far.
  10. wildmandave

    93 mustang starting problem

    Ok we put a new fuel pump in and backed the fuel pressure down to 38#. It still won't start until the fifth time cranking it but seemed to run fine otherwise. Now this is starting to really stump me. Any suggestions would be great!
  11. wildmandave

    95 cobra 351 alternator won't mount

    I clocked the alternator and had better luck this time but I had to shim it about 1/2 inch. Will this hurt the belt or will I be chucking belts all the time?
  12. wildmandave

    no spark-good coil 95 cobra

    Dude its already on the car the coil is not throwing spark. I tested the coil on my neighbors bronco and it worked fine but not on my car.
  13. wildmandave

    no spark-good coil 95 cobra

    My coil is getting power but making no spark.Could it be the TFI module? I pulled the coil and put it in another car and it started right up.Please help me! :bang: :bang:also see other thread in svt tech forum for more info!!!!!!!!!
  14. wildmandave

    Please help with this S/N 95 question

    did you check the inertia switch? sounds like it may also have a hot wire grounding somewhere...?
  15. wildmandave

    Fuek pump not working? HELP!!!!!

    did you check the inertia switch? could be a short in the wiring also .
  16. wildmandave

    good coil, no spark- what gives?

    Today I ran my new engine for the first time. It ran for a while although it seemed to run a little rough. I adjusted the fuel pressure and set the timing. When i shut it down I pulled the plugs. Some were black and looked like charcoal, some looked brand new and it seemed as though no traces...
  17. wildmandave

    93 mustang starting problem

    My friend has a 93 5.0 with some kind of starting problem when it's cold. It doesn't always do it but he said he has to crank the ignition between 5-10 times to get it to start. He's replaced the regulator and the fuel pressure is set about 45 on 30lb. injectors. It has a fairly new bbk 255lph...
  18. wildmandave

    Should I use pushrod guide plate?

    You were right I was asking about the spider plate and dogbones. I am rinning tfs heads and scorpian 1.6 rockers. So I should be ok then, right?
  19. wildmandave

    Should I use pushrod guide plate?

    I recently bought crane cams link bar roller lifters for my 351w (1970 block). The instructions didn't say anything about re-using the pushrod guide plate but it seems to interfere with the link bars. These roller lifters are very expensive so I don't want to mess them up. A friend told me that...
  20. wildmandave

    Fuel Pump Installation, Help please...

    He's right theres a place where the sock at the end of the pickup tube is supposed to go and it only fits one way. Get a flashlight and shine in there and this should give you a better idea of how it goes in but don't force it or it may break!
Top Bottom
Back
Forums
Menu