Search results

  1. purevenm

    Installing PA Racing K Member Couple Questions

    Sorry everyone, I didn't realize that I could have ordered the mustang bolt package. I was able to finally go online last night and back on ther website and ordered the $25.00 hardware. 95strokerPSU, any tips or lessons learned while installing your K-member are greatly appriciated from me.
  2. purevenm

    Installing PA Racing K Member Couple Questions

    I also just got my Pa Racing K-member and A arms. I'm waiting for warmer weather to install it. So needless to say I'm paying close attention to this thread. My question is: 95strokerPSU, Did that bag of parts(bolts and nuts) come with your K-member? I did not get a bag of bolts with...
  3. purevenm

    Anyone Have an 03 Cobra Steering Rack?

    No, it takes less rotation of your steering wheel to turn the car in a corner than the stock(old) rack and pinion. For "example" only: Lets say it took 4 rotations of the steering wheel to the left before you could not turn it any more. With the quick ratio it would take, lets say 3...
  4. purevenm

    Anyone Have an 03 Cobra Steering Rack?

    I have an 03 complete rack and pinion on my 95 cobra. It was a direct boltup. I got it becuase of the quick ratio steering. You'll notice that right away. Only thing I had to do was get an alignment done.
  5. purevenm

    Does anyone running dish wheels on Stang , post some pics

    Here's my last look..... And here's the other set on Ebay right now!
  6. purevenm

    Does anyone running dish wheels on Stang , post some pics

    Sometimes looking at the:SNSign: sn95 section can cost me money. I saw this thread a day or two after it started and decided I needed to deep dish the whip. So, now I have 3 complete sets of wheels and tires......I'm going to stop visiting :SNSign: for awhile, it's damn expensive. Slow...
  7. purevenm

    UCA bushing removal tool question

    No apologies needed. I'm just glad to install these bushings that have been sitting around for over a year.:nice: OK, I'm going to hang onto the tool until Bosko5.0 hits me up to send it back to him or someone else needs it.
  8. purevenm

    UCA bushing removal tool question

    I KNOW!:rlaugh: My hands got greasy just pulling out the instructions:bang: :bang: :bang: :D. Thanks, bosko5.0, can you p.m. me your address and I'll send it back to you.
  9. purevenm

    UCA bushing removal tool question

    Ok, I'm done with it and not sure if I need to send it back to the owner or if there is someone else after me. I'm also not 100% who is the awsome guy:hail2: is that owns it. If the owner can pm me with his address to return it to him. Or, the information of the next person inline, I would...
  10. purevenm

    95 cobra front end help

    Possible your K-member took a shot during the accident. Your K-member might have been moved when it was hit. I'm not a body guy but this was the first thought that came to mind. Hope this info helps and not hinders you.
  11. purevenm

    What degree t-stat do i need with my KB

    I run 180 with a 4 core radiator(aluminum), runs cooler than it did when my 95 cobra was stock.
  12. purevenm

    UCA bushing removal tool question

    I'll send a few bucks back with it and pay for the shipping. Better than looking at these poly bushings sitting in my home office another year. 87_GT remember "Its hard being a pimp!" :nice: Whoever needs my address, pm me and I'll give it to you. Thanks, Darin
  13. purevenm

    UCA bushing removal tool question

    I have a new set of poly bushings sitting in my office waiting to find someone with the bushing removal tool. I would love to borough it and forward it back to you or the next person at my expense for the postage. I can p.m. you with my address if you are willing to share the tool. Thanks...
  14. purevenm

    What parts are needed when installing KB?

    Here's mine, just to add to the good lookin ones already...and a side view for ya!
  15. purevenm

    3G alternator question

    Thanks HISSIN50, I didn't know that it is a direct replacement for my stock alt. I guess I'll just mount my stock pullty on the new polished one.
  16. purevenm

    3G alternator question

    I have a 3G polished ALT. I am wanting to put on my 1995 Cobra. Do I have to change the gage of wires or the fuse? Are these 3G alternators putting out that much more power, that I need to beef up the stock wiring? Also, I have a fox body alternator pulley that is larger than the stock 95...
  17. purevenm

    AFR valve cover question

    I believe I have found a set...I hope, I already paid for them. Well, I think I have purchased a set that will work...tell me what you think. I found them from JOE HECK RACING. Or should I say, found them on ebay from Joe Heck racing. They are a new product from them and are modified specificly...
  18. purevenm

    AFR valve cover question

    Thanks, blackvert for the reply, I don't think they will cover my roller rockers. The DSS r/r's I'm running are wider. See attached photos. Still looking for anyone running AFR heads 165 or 185 with my style of R/R's running Fox valve covers. I really want to order them but need personal...
  19. purevenm

    AFR valve cover question

    I'm looking for a set of chrome valve covers that will clear DSS roller rockers on a set of AFR 185 heads that are not considered "TALL". Also, not wanting the ones where the filler neck is on the front passenger V/C. Looking for push in breather type or no holes to drill my own. I have...
  20. purevenm

    95 rear bumper for cobra replacement

    I just had my original 1995 cobra bumper removed today and was going to list it on Ebay. If you are interested in an orginal 95 cobra bumper let me know. I'm in Omaha Nebraska, its painted in the stock Rio red E8 color.
Top Bottom
Back
Forums
Menu