Search results

  1. 9

    can i remove the rear quads

    well what would it really hurt if i did it now.....im putting my welds on with some 275-50-15's and they will rub.....
  2. 9

    can i remove the rear quads

    ive heard that you can take out the rear quad shocks,is there somthign u need in order to do it ..does it really help the rear end drop for weight transfer..i also heard you can only do it with aftermarket comtrol arms adj or non adj dosent matter....
  3. 9

    is this an fms f cam and also an opinion

    anyone?
  4. 9

    will a 76mm c&l mass work for s/c

    anyone?
  5. 9

    will a 76mm c&l mass work for s/c

    i was gonna go n/a and now im going to get a s trim everythign i have will work except im not sure of the mass air will it work for a s/c or do i need another one.....
  6. 9

    is this an fms f cam and also an opinion

    i am installing my h/c/i and the old cam has f303 stamped on the end which im certain is for the fms f cam but just to be sure is this correct? also would you run the f cam or stage 1 trick flow with... trick flow heads intake rockers 70mm t.b 76mm c&l mass 30#inj 255 pump 373 gears...
  7. 9

    N/A stock shortblock 110mph+ traps guys, I got a question

    a freind of mine (wrathchild on here) goes high 109's @12.71 on a 1.9 60' with stock high mileage suspension and 17 in heavy wheels .....its just a simple h/c/i with the t.b ,mass and fuel...im sure hell chime in...hes also running 4.10's i think he picked up 1 mph from switching from 3.55-4.10
  8. 9

    t5 to c4 swap need info

    well thanks for all the info ..does anyone have a parts car that they would like to part out ..originally i was trying to trade my 50,000 mile t5 complete system clutch and short shifter etcetc.....clutch has about 200 miles on it for a c4 kit and id throw some money there way to so if you hear...
  9. 9

    t5 to c4 swap need info

    i know this has been asked a million times but i want to swap this out and i need a detailed list of what to purchase and get for the swap ..does anyone have any good links for info...also if anyone is willing to trade plus i could give cash as well let me know..i can give a complete list of...
  10. 9

    Anyway to tell what sampling tube a C&L MAF has?

    it will be right around the flat part that actually holds the tube in here is the calib.. 19#inj gold/yellow 24#ford motorsport inj blue 30#ford motorsport inj purple stock 93 cobra 24 inj clear tubr 1993 cobra 30#inj blue tube
  11. 9

    thinking about nitrous please help...

    ok so im open to suggestions i am willing to tune but would like it to be some what simple at least to start.....im so for sure i will be getting bottle heater purge window switch (use it with the wot) switch panel so what brand do you reccomend and really how is a wet kit much harder to...
  12. 9

    thinking about nitrous please help...

    well actually i have alot more mods than i listed i was just trying to give the basics because i didnt want you all to suffer through a long post...i have trick flow summit kit w/track heat valve trian track heat intake stage 1 cam electric fan 140 amp alt upper lower arms subframes 373...
  13. 9

    thinking about nitrous please help...

    anyone else have any thing to say i really do appreciate the info....i wouldve been broke after all the stupid stuff i was gonna buy ..haha were are some places to by things like this stuff at
  14. 9

    thinking about nitrous please help...

    well my prices were off summit has this zex kit but dosent list any of the other stuff will any purge heater work??? i have a msd 6al if i dont get the timing controller what would i do or should i just sell it for the digital 6?? also i have fuel press gauge and afpr kirban...what about...
  15. 9

    thinking about nitrous please help...

    well im thinking of getting nitrous for my 91 lx 5.0 mods are summit trick flow t.h kit 76mm mass 70mm t.b 30#inj 255 pump kirban fuel press reg elect fan pulleys msd 6al etcetcetc... tell me if i am forgeting somthing or wasting my money on somthing here is what i have put...
  16. 9

    bigger throttle body worth it on a stocker/

    well turbo was first because it cost the most in one lump to purchase and well i had it so i did it check there site actually turbochargedpower.com it is very impressive ow stock cars are running......and spool it will still spool at an incredible rate and when racing every shift will pull you...
  17. 9

    bigger throttle body worth it on a stocker/

    maybe i should explain better the car actually has a ton of bolt ons except for t.b to pan..the turbo will be here anyday and i have 42#inj 76mm mass etc etc..with the kit.....easily 450 rwhp so im pretty sure 65mm will be too small ..heads and intake will be may..i just dropped 6000 bucks so i...
  18. 9

    bigger throttle body worth it on a stocker/

    well i dont want to buy twice and since im going with a big turbo setup ..im sure ill need a lil more than 65..and being that i have a built bottom end in the pl;ans for future stuff i may just wait and yes i will port the stock t.b i have i never thought of that does anyone have a site on info...
  19. 9

    bigger throttle body worth it on a stocker/

    well ill deff need bigger than that for the turbo setup...i know it wont hurt me..but what im asking is wil it help me alot now ..is it worth the 200 bucks now or would it be a better gain once i get h/c/i stuff?? thanks for the reply
  20. 9

    when are torque box supports needed

    when should you do torque box supports/reinforcements.....ill prob dyno 450 rwhp in spring and have spent alot of money as is and need a few more things ...torque box supports are my list but are they needed yet i could use it for somthing else right now
Top Bottom
Back
Forums
Menu