Search results

  1. Nova

    How to replace door roller bushing?

    thanks man, ill be complete rebuilding my doors in a few weeks.
  2. Nova

    sn-95 dash in a fox??

    yes it has been done and can be done. the dash bolts in with minimal modifications. but wiring it up takes some time and patience. theres a large thread about this on corral in the paint and body section. the center console takes some work, and door panels are a pain in the butt.
  3. Nova

    Can i install a motor into a 99gt with long tubes on the motor?

    will be doing this in the driveway... ive got a hoist, but no access to a lift...
  4. Nova

    Can i install a motor into a 99gt with long tubes on the motor?

    buddy of mine has a heads/cams 99gt, spun a rod bearing last week. last i heard hes looking at ordering a short block, having a local shop put the heads and cams back on and make sure they are in proper time. the question i have is can the motor go in with the headers bolted in place? can i...
  5. Nova

    this cant be safe.

    theres another way to heat a bottle?
  6. Nova

    85 Mustang 5Lug Conversion

    im going to try and answer a few questions and correct some mis information. you can use the 94+ spindles, you will need to either use 94+ aarms, or use a stack of washers of about .330. i used 3 grade 8 5/8" ID washers. or you can press sn95 ball joints into your control arms. if you want to...
  7. Nova

    "Must have" Mustang library

    an EVTM manual for you car. factory ford electrical/vaccum book with trouble shooting info. year specific, but most information crosses i think. less then $20 on ebay.
  8. Nova

    PINKS all out Gainesville

    i know a few guys from columbia, sc and atlanta, ga goin down.
  9. Nova

    5 lug drum-anyone know size or part #

    the drums are $40 apiece from my local autozone.
  10. Nova

    Auto Meter Gauges

    mechanical guages are full 270 degree sweep, electricals are 90 degree sweeps. mechanical gauges are also more accurate. you do run a small nylon (or braided) tube into the car for the oil pressure. and a small alcohol filled tube you dont want to kink for the water temp. having said that, i...
  11. Nova

    door hinges fixed =]

    i think ill just smack some new bushing and pins in mine.
  12. Nova

    mach 1 brakes

    you have a few options on how you want to do things. its a lot of work, and a lot of reading. mjbobbit, sn95brakes, and the mk2300 kit instructions were where i got most my info. i used north race car brackets. some of the mach ones, and the bullits got the running pony calipers, same spec...
  13. Nova

    HELP!!!!!!!!! ASAP PLEASE

    mine just slipped right in...
  14. Nova

    Good deals ive scored lately

    no the mac headers will not work. the block on a 351 is taller, which moves the exhaust ports on the head up higher.
  15. Nova

    North Race Cars brackets seem like BS....HELP

    i dont get what your problem is with the washers? just grind a bit of the calipers? all my stuff bolted right up no problem, just wish i wouldnt have taken their advice and gotten the anti moan brackets anyway.
  16. Nova

    Nitrous Tank Blew!!!!!

    ide say the bottle was over filled. or owner error.
  17. Nova

    Got the T5 apart and semi assembled, need some help

    rockland standard gear would prolly be able to get it as well.
  18. Nova

    Killer tire deal!

    they will be fine.
  19. Nova

    Decals on Windows?

    sounds good. ive got 2 decals on my car. a univeristy parking decal im required to have (which will be gone next fall and replaced with a mirror hang tag) and a clemson sticker for alittle school spirt.