Search results

  1. D-BOI

    pics of you stang and DD together

  2. D-BOI

    Could someone run a CarFax please?

    People screwing up like this messed it up for everyone else. it was 40 bucks for an unlimited amount now you have to pay for each single one.
  3. D-BOI

    Just finished my Pi cam and Intake swap.

    Chris, Thanks for the prompt and thorough reply. Up until today i was just visually checking the gauge. However today i went to my friends house and he put it on the scanner for me. According to him there was no visual coolant leaks and the exhaust did not smell like coolant was burning...
  4. D-BOI

    Just finished my Pi cam and Intake swap.

    Thermostat was installed with the spring inside the intake If air is trapped inside the cooling system, how do i know and or burp it out? Should i take out and put back in the sensor?
  5. D-BOI

    Just finished my Pi cam and Intake swap.

    Honestly i have driven it for 3 days and the coolant level has not dropped even 2 millimeters. The car still runs strong but definitely much hotter than before. Also it doesnt blow smoke all the time only when you start it, and hit the gas the first time it blows very little white smoke and...
  6. D-BOI

    Just finished my Pi cam and Intake swap.

    Dang that sucks bro. The thing is I keep checking my coolant level and its not dropping at all. After 60 miles of driving nothing dropped. I just went to auto zone and I pulled 2 codes. 0430 0420. 1. Bad cats- I don't have any 2. Engine misfire 3. Large vacuum leak 4. Oil leak/valve...
  7. D-BOI

    Just finished my Pi cam and Intake swap.

    I hate my blackberry. Sorry for the double post!
  8. D-BOI

    Police Interceptor going in

    ^^ I had an internship with a local pd, and i can tell you this from experience. Some of these cars stay on for months. literally besides them being off when refueling.
  9. D-BOI

    Just finished my Pi cam and Intake swap.

    So i went out there today started her up waited until she got warm and had someone hit the accelerator. Some waterdrops came out but no smoke really. WTF is going on with this thing. Also i noticed there is some traces of fluid on the right between the intake bolt and the intake on the drivers...
  10. D-BOI

    Just finished my Pi cam and Intake swap.

    I spent 60 bucks on the intake and 50 for the cams, how much is the Livernois kit? Plus money is definitely an issue at this time.
  11. D-BOI

    Just finished my Pi cam and Intake swap.

    I just checked the coolant level, I do not see any movement on it that would indicate it has gone lower, but then again I didn't measure it very precisely, I was just eye balling it. As far as coolant leaking, the only place it could go into that would cause white smoke is in the intake ports...
  12. D-BOI

    Just finished my Pi cam and Intake swap.

    So from the coolant passages it could be going into the intake ports? I tried cleaning the mating surface on the heads as best as I could but I didn't get to technigal with them, maybe I should have lightly sanded them with 1000 grit paper but they looked damn clean ro begin with.
  13. D-BOI

    Just finished my Pi cam and Intake swap.

    I might have gone overboard on the rtv. Anyways the coolant could be entering through where exactly the intake ports? Pardon my novice questions.
  14. D-BOI

    Just finished my Pi cam and Intake swap.

    double post
  15. D-BOI

    Just finished my Pi cam and Intake swap.

    You mean the intake gaskets? I read somewhere that i should re-torque the intake bolts once the car got warm, i forgot to do that. I will try to retorque them to 22 foot pounds tomorrow after i let it get to operating temp.
  16. D-BOI

    Just finished my Pi cam and Intake swap.

    I used the pi gaskets and i put rtv in the front pass side and by the firewall on the drivers side. I sure as heck think i put a significant amount of rtv in there. I dont see any coolant leaks anywhere at all everything seems bone dry. Would a coolant leak cause it to run hotter than normal...
  17. D-BOI

    Just finished my Pi cam and Intake swap.

    So finally today i was able to put everything back together, after having the car apart for more than i wanted too. Everything went back on perfectly and when i started her up she idled very well. There was no leaks, no rattles car runs perfect. However when i went for a ride, with my buddy...
  18. D-BOI

    Best Plugs for my Application:)

    Really? Not platinum plugs? Wow i have platinum ones in there now, i guess i should put some copper ones back in.
  19. D-BOI

    Best Plugs for my Application:)

    Hello guys and gals, im currently in the process of putting in my PI cams and intake on the mustang. I still have to remove the cams but i still have to order the Anderson tool to keep the chain in place while swapping out cams. I also wanted to replace the plugs even though the ones in there...
  20. D-BOI

    Detroit Area Mustang guys

    boy this thread is dead lol. is anyone going to the wilson barn show?
Top Bottom
Back
Forums
Menu