Search results

  1. Nucking Futs

    393 stroker. Does anyone have one in their car?

    Hello, all! I am seriously thinking about doing a 393 stroker but I have a few questions. 1. Where can I get all the brackets to run all of my accessories and what else do I need to do the swap? 2. I already have the Trick Flow heads and I know I will have to hog them out so I'll probably send...
  2. Nucking Futs

    Who's running a CHP or a HPE (horsepower engineering) 347 shortblock?

    Have you thought of letting a local machine shop do the work? I had mine done locally and three years later it is running fine. It is a 347, I used a good crank and rods but put in Keith Black hypereutectic pistons. I wasn't going to add a power adder and I didn't want that piston slap when it...
  3. Nucking Futs

    Best Built up AODE 4R70W Combination?

    I got an Autologic chip from JMS but I "think" Superchips or Diablo can do the same thing. If you don't change your settings via the chip the sensors will think you are running faster than you are due to the gear swap. Also, you will hit the rev limiter a lot faster. It won't shift up or down...
  4. Nucking Futs

    Best Built up AODE 4R70W Combination?

    Yep I have 4:10 gears. One of the best single upgrades I ever did but you WILL have to get a chip or you will burn your transmission up. I already had the PI 2500 stall I paid around 1600 bucks that was everything and labor
  5. Nucking Futs

    Best Built up AODE 4R70W Combination?

    1. Single Disk Precision Industries Converter (Multi Disk if with Power Adder) 2. Shift Kit (Trans-go, B&M, Lentech VB) 3. Red Eagle Rebuild Kit (Build up innards) 4. Mid Shaft (Replace with Ford Part Number F8AZ-7F351-AA) 5. Replace Roller Clutch with Mechanical Diode (F8Z-7A089-AA) 6...
  6. Nucking Futs

    Could too much timing cause a car to run hot?

    I had a small leak at the clamp on the hose but other than taking one off, which is a royal pain the in you know what, that is the only way I think it would work. I still had heat but it never got hot just warm. I will warn you I tried everything I could think of and what a shock there is a...
  7. Nucking Futs

    Could too much timing cause a car to run hot?

    You have probably done this but here we go. First, burp your system and you may have to drain and fill it again. Second, I think it has only happened to me. The two hoses runing into your heater core one of mine went bad but I couldn't tell it from the outside and/or feel. There is a steel wire...
  8. Nucking Futs

    94-95 AODE owners look here please

    Unless you have done a gear swap don't waste your money and keep the factory shaft. On to the cam. I bought my Trick Flow cam for 139.00. There are a few things I would by used but a cam isn't one of them.
  9. Nucking Futs

    just got destroyed by a Talon TSI

    Get a 408 stroker and be done. Can you imagine the look on his face if he did spray and you still run off and leave him like he is sitting on a park bench.
  10. Nucking Futs

    AEM plug and play has anyone ever used it?

    It looks pretty impressive on paper but before I shell out 1500 bucks I would like some opinions.
  11. Nucking Futs

    HELP! JMS chip f***ed up my car!

    I got my JMS chip about a two years ago and I can honestly say that it saved me from having to bash my car to death with a sledgehammer. I had all types of problems but as soon as that chip was installed it was as close to perfect as you can get without being able to dyno tune and burn the chip...
  12. Nucking Futs

    New Dyno # with H/C/I, need help

    The 70mm throttle body might be a little to big. Is your block stock? Was your cam degreed in properly? There are many things that could be wrong. Do you have an adjustable fuel pressure regulator?
  13. Nucking Futs

    Finally got one

    Now go get you some 4:10's in that thing and it will be a completely different beast. That was the one best mod I ever did but you MUST get a chip to recalibrate the computer. I didn't and it burnt my old tranny up. Get ready for the mod bug to bit. I just told myself I would do the gears but...
  14. Nucking Futs

    is $8000 fair price for this car?

    It depends if you want pushrod or mod motor? I think as of right now the mod community hasn't caught up with the aftermarket for the pushrod as of yet but it is only a matter of time. I am personally old school I like the pushrod but that is just me. If I were you take 5500 cash and lay it on...
  15. Nucking Futs

    is $8000 fair price for this car?

    Yes, gears makes it feel like another car. Is it an auto or stick?
  16. Nucking Futs

    is $8000 fair price for this car?

    No it is a hard top and it has an automatic but it is a built auto and also has 4:10 gears. it is a real sleeper it has a growl but not to loud. When these ricemobiles lines it is a blast to fly by them with one hand on the wheel and the other waiving bye. I raced a 99 cobra on the interstate...
  17. Nucking Futs

    is $8000 fair price for this car?

    I'd say no. I was going to sell my stang with a 347 stroker and EVERYTHING worked for 6500 bucks but all I got were tire kickers. I think the price I was asking was fair but just looking at the specs on this car without actually seeing I would say that is too high.
  18. Nucking Futs

    is the JMS CHIP really worth it ?

    There is a four page questionnaire on their web site that I had to complete. There were some boxes you could put in suggestions as to what you wanted done or what your current drivability issues with the car was and by that he (Chris) created a chip for me. It was pretty detailed and he even...
  19. Nucking Futs

    is the JMS CHIP really worth it ?

    I got my chip done there after I put in my 347 and it runs as close to stock as you can get. However, since Chris isn't there anymore when I sent my other chip back for a free re-burn it wasn't near as good as the first one I got. Now that Chris is with Super Chips I bet their product quality on...
  20. Nucking Futs

    The new for 2004 PMS unit anyone have one yet?

    I was thinking about one but wanted to know/ask anyone's opinion if they have used this unit?
Top Bottom
Back
Forums
Menu