Search results

  1. 88306stang

    diagnose my problem *short vid inside*

    In my situation the belt wasnt riding against the tensioner at the right angle. Which in turn the belt wasnt riding against the tensioner the way it should have. i was also only running the basics for acc.
  2. 88306stang

    diagnose my problem *short vid inside*

    It depends also on the belt riding against the tensioner hard enough. If the belt is not putting enough presure on the tensioner then it will slip.
  3. 88306stang

    diagnose my problem *short vid inside*

    I couldnt open your vedio but i had the same problem and it ended up being the tensioner. Im not sure what your setup is. I went thru a lot of crap to figure mine out. let me know what your setup is and ill tell you if it was the same as mine.
  4. 88306stang

    door handles...how to!

    I got stainless bolts with lock washers and nuts on the inside. You get bolts that fit in the holes where the rivets go. Mine have been on that way for alnost 2 yrs and no problems. Get stainless bolts so they dont rust.
  5. 88306stang

    Cervinis stalker bumper warping

    I know that it is urethane. But i was looking to replace it cause of the accident and the heat warping across the top of it and the headlight mounting panel is all busted up in that corner. That is why i was thinking about buying the stalker front bumper I figure after i buy the front bumper and...
  6. 88306stang

    stock motor ignition upgrade

    Thanks for the advice im going to look in to getting that done. Definintly would save some money.
  7. 88306stang

    Drag struts on a lowered car?

    Any one out there got any advice or suggestions?
  8. 88306stang

    Cervinis stalker bumper warping

    How does that work the orignal is fiber glass. I like the looks of the stalker front bumper but the more i read the more i will probaly just buy a stock one to replace this one . The only reason im looking to replace it is cause some lady back into me and took out the fender and the corner of...
  9. 88306stang

    stock motor ignition upgrade

    Im using stock heads. the car only has 63000 miles on it. I just wanted to get a little more out of it with out doing any thing major cause this is my daily driver , my other mustang is my toy.
  10. 88306stang

    Drag struts on a lowered car?

    I know this question has probaly been asked before. On my 88 mustang i have been changing things i got rid of the 17 inch wheels and went back to welds with skinnies up front. I want to put drag stuts up front but i was wondering how that will work with the car being lowered (it is only lowered...
  11. 88306stang

    Cervinis stalker bumper warping

    Does the stalker front bumper come with the headlight panel or do you still need that?
  12. 88306stang

    Cervinis stalker bumper warping

    My stock front bumper is heat warped already and was thinking about getting the stalker bumper. My front bumper is probably heat warped from the florida sun. Does anyone recommend the stalker front bumper?Or should i just go with a factory one.
  13. 88306stang

    stock motor ignition upgrade

    Well guys thanks for the advise. I think ill pass on the msd 6a box and just stick with the other ignition upgrades. As far as the tb goes i already got it and i do plan on putting a different intake on in the future. Which intake do you think would be best?
  14. 88306stang

    stock motor ignition upgrade

    I have a 93 gt that i want to do a few things to. For starters im putting a x pipe and cat back flowmaster system. Then am going to put a bbk cold air intake on with a 70mm throttle body and egr plate. I also want to up grade the ignition. I already got the ford racing wires , autolite plugs...
  15. 88306stang

    Rim & Tire Question

    If you cut the wheel all the way it will rub a little bit. I took the quad shocks off. My 88lx i had 17x8.5 up front with 245/45 and they rubbed alot plus would rub the fender on a hard bump. That is why i went with the 245/40 this time.
  16. 88306stang

    deep dish on a fox????

    Let me know if you figure that out. The biggest rim ive ever gotten on a fox is a 9.5 rim. I would love to put 10 inch wide wheels on the back of a fox, I have heard of it being done so if anybody has done that let us know how it was done.
  17. 88306stang

    Rim & Tire Question

    I just put 17x9 on my 93 gt and i went with 245/40 up front and 275/40 in the rear.
  18. 88306stang

    Fitting 10th Annversary Cobra wheels

    I guess ill have to figure some thing out cause im not cutting a hole like that
  19. 88306stang

    Fitting 10th Annversary Cobra wheels

    I dont really want to drill a hole so i guess i'll have to figure some thing out. Do you mean drill a hole through the part of the cap under the svt emblem?
  20. 88306stang

    Fitting 10th Annversary Cobra wheels

    I just put the anniversary wheels on my 93 gt yesteraday. I used the lsc rotors up front and had to put a 1/4 inch spacer to make the wheel sit flush against the rotor. In the back i used stock size five lug axles in the back. I took the quad shock off and have no rubbing problem in back. I used...
Top Bottom
Back
Forums
Menu