Search results

  1. H

    best way to lower 67

    It already has 620's and 5 leaf mid eyes but I need to drop the front for sure and maybe the rear as well.
  2. H

    New Wheels (Finnaly) pic

    Thanks guys Edbert I don't like the flush mounts either these pics make it look like these are but actually the spokes are back about 2 inches or so from the lip. In real life they have a smoothe lip that gives that deep dish apperence. Lowering? Are blocks ok for the rear? Can the 620...
  3. H

    New Wheels (Finnaly) pic

    It has 620's and mid eyes after getting these on there I should have even did more. I guess I will look for that template to do the shelby drop and still may have to cut the 620's and not sure on the rear. I sorta like the higher in the front look like they had when they came out but not sure...
  4. H

    New Wheels (Finnaly) pic

    Update This is what she looked like before the wheels After [ And just a shot of the engine. Still a lot of work to do but we are getting there. Pardon the dust:)
  5. H

    best place to find a cowl hood?

    Need a little more room under the hood and like the cowl. I would like to have steel but if not possible who makes the best fiberglass hood for a 67 coupe? thanks
  6. H

    New Wheels (Finnaly) pic

    Wheels where in today. These things are REALLY nice. The Polish goes from lip to lip even behind the spokes. I did not get to test fit them yet but will first thing Monday Morning. Will post pics then.
  7. H

    AOD wiring???

    Thanks guys Edbert my B&M shifter has the wires for back up and neutral safety so I will just wire it to my factory harness and the prongs on the AOd will just remain idle (not in use) This is the way it was done before with the hurst shifter that was hooked up to my c6. Even if they don't...
  8. H

    New Wheels (Finnaly) pic

    Already been looking lol. I am not sure if I have granada spindles or original mustang . is there a difference? What would be a good size to get? Also it is non power brake att I can stop it pretty easy but not sure about my wife who may drive it on occasion.
  9. H

    New Wheels (Finnaly) pic

    280 a wheel and the front is 4 inches but my car is non power steering so I was thinking the smaller foot print will make it a little easier to turn in the parking lot. I will get them next week and we shall see how they look. the tire shop is going to work with me on the tires size we will...
  10. H

    AOD wiring???

    I am using aftermarket shifter for AOD can I just not use the plug on the aod for backup lights and neutral saftey switch and just use the one on the shifter? Is there any ill effects on the AOD if these switches are not being utilized. It is non electronic trans. Also Think Edbert asked this...
  11. H

    New Wheels (Finnaly) pic

    Well I ordered the wheels for my 67 coupe finnaly. Aftr much debate I Decided on the Foose Nitrous II in a staggerd 17-9 17-7 combo. The local tire shop is going to try some different tire combo for me but I really want to use 275 for the rear and a 215 for the front. The car has a 9" with...
  12. H

    AOD selector linkage - up or down?

    If using a cable operated b&m shifter withfloor shift tranny i was told shift down and tv up. You are saying this is incorrect?
  13. H

    Purpose of Steam Holes?

    As far as metal shaving's in the block. Best case would be to have the block cleaned afterwards but I have seen guys put a globe of vasoline on their drill bit and it will catch most if not all of the shavings. Good luck
  14. H

    17" AR Sprint (Slots)

    Anyone used these or seen them in person? I am considering giving them a try on my 67 coupe. It is getting close to being finished and I just have to decide on what wheel tire combo.
  15. H

    Aluminum Raditor

    I have a 67 coupe and was looking at Summit Raditor for it. They list it for a 65-66 and 69-70 but no 67 68. Will the Rads for the 65-66 fit? The size is close but not exact.
View older results
Top Bottom
Back
Forums
Menu