Search results

  1. J

    really strange problem after coilover install

    its normal but the resistance should be consistant(sp?) what it would do is pull hard for a second then have the resistance it always had before.....am i just being paranoid?
  2. J

    really strange problem after coilover install

    so i did my coilovers acouple nights ago, and tonight sitting in my driveway with the car at idle i turned me wheel slightly to the left then slightly to the right and when i did each way there would be a low humming from underneath the hood ( i was thinking ps pump) and the wheel would actually...
  3. J

    MM coilovers done....had to chuck quads?

    yikes...$84 each. are the monroe's the stock for quads? is not could i just get stock replacments? is there that much of a difference in the valving of the bilsteins vs stock?
  4. J

    MM coilovers done....had to chuck quads?

    i'll double check with MM
  5. J

    MM coilovers done....had to chuck quads?

    coilovers went on fine, but my quads didnt clear them, they were blown anyway...they were monroe gp's. i dunno if those are stock or not but MM said that bilsteins will fit. where can i get them? and will they fit on a saleen/svo rear axle?
  6. J

    question on MM coilover instal

    ok thanks......now to get some breakfast and start on the rears :D
  7. J

    question on MM coilover instal

    i went with bilstein sports...so that means i dont need the bumpstop?
  8. J

    question on MM coilover instal

    i finished the fronts tonight but i have a question, i had MM CC plates on my car before the coilover instal and i was wondering if im supposed to reuse the polyurathane cone looking thing (yes that the technical term for it at 1 in the morning) that sat right under the strut tower. it didnt say...
  9. J

    need price opinoins....brakes

    meh he said he was firm at 400. and like you said the mach1 set up on buyfordracing is only like 300somethin and thats with SS lines
  10. J

    need price opinoins....brakes

    so you think i should pass on it?
  11. J

    need price opinoins....brakes

    hello all i have a chance to pick up complete 94 cobra front brakes, from the spindle all the way out. around 50k miles, resurfaced rotors, guy wants $400. is this a good deal??? thanks Joel
  12. J

    bilstein rear shock question

    so i was putting my coilovers together on my lunch hour today and i was curious what would be the best option as far as lower shock mounts for the bilsteins? ( the rubber piece that goes inside the eye at the bottom of the shock body)cuz as far as i can tell they didnt come with any. will stock...
  13. J

    What Should I Do Next?

    deffinately suspension, sfc's and strut tower bar
  14. J

    MM coilovers on the way

    they showed up today, question though, can i put them all together before i tear my car apart then just swap them in? the cc plates are already on my car. anyway, just wondering...its a dumb question but im at work and the box it as home so i figured id ask
  15. J

    Roush saleen/racecraft stock springs??

    hello all im about to swap out to MM coilovers and i was just wondering the ballpark worth of my stock fox saleen springs? thanks Joel
  16. J

    MM coilovers on the way

    ive been toyin around with it for a while and finally sold my street bike so i figured it was time
  17. J

    MM coilovers on the way

    damaged sheet metal in the rear? from what?
  18. J

    MM coilovers on the way

    well after many posts of confusion and bitching i finally broke down and ordered my coilovers with bilsten sports and i think 375/225 front/rear springs repsectively. anyway just felt like sharing :rolleyes:
  19. J

    will $3000 be enough?

    this is what i have so far for compiling a list MM coilover kit MM rear shock mount ( i need an extra cuz im not running a panhard bar) mach 1 front brakes ( comes with rotors, calipers, pads, ss lines, brackets) 94-95 spindles hubs hub nuts dust caps dust shields banjo bolts...
  20. J

    will $3000 be enough?

    i wanted to go with coilovers because some of the street driving i do is on curvey roads and i love corner carving. also ive heard it actually helps with ride quality a bit. right now im running the svo five lug 4 wheel disk swap, so im not really sure what i can reuse from this swap when...
Top Bottom
Back
Forums
Menu