Search results

  1. cj99

    question about timing

    ok thanks. the car sat for about 9 months while motor was out being rebuild ,etc...so the tank was drained but it could have gotten rusty and the new gas put in it may have plugged the filter..now for the timing. i did jumper the spout nothing happened , also i put a test light on the wire...
  2. cj99

    water pump pulley bolt size?

    i need one too. anyone know what size the water pump pulley bolts are
  3. cj99

    question about timing

    timing and fuel question ok, i set my fuel to 38 lbs like my last post say's...its running better but when i dont have my foot in it and am just trying to cruise.. it feels like it has a small mis...so i have too issue's i checked fuel pressure again. here is whats going on..when i have the vac...
  4. cj99

    question about timing

    cool, did not think mids 80's car computers were up to that
  5. cj99

    question about timing

    i do have 2 post going , one for the wire and one for the timing issue. i do see 2 diff names cj99 and chadjones99 and yes both me. i guess i have the same password for both and some how logged on to one post ? i dont know...but yes both me
  6. cj99

    question about timing

    what is FMEM ?
  7. cj99

    question about timing

    ok, thanks... what spout are you taking about ? and i do not remember having 2 accounts...maybe i set up one in the past but have been posting only on this one. now i have been asking same question on another website..(moddedmustangs ) i fount part of my problem i had set the fuel pressure...
  8. cj99

    need help I.D.ing a wire..green with black stripe

    i was wrong it is a black wire with green stripe and its some type of ground wire. not hot... i had my test light on the + on my batt
  9. cj99

    need help I.D.ing a wire..green with black stripe

    ok.. update wire is hot even when car is off and keys out. does not seem to be afticed by high or low beams off or on
  10. cj99

    need help I.D.ing a wire..green with black stripe

    thanks for your help.. will try head lamps to see if wire gets hot or not. it was hot before when i tested it, but last time i checked it was not
  11. cj99

    need help I.D.ing a wire..green with black stripe

    does anyone know what the green wire with a black strip goes too. i found it broke on the bottom side of the motor by the sway bar. thanks p.s. its on a 1986 GT mustang
  12. cj99

    question about timing

    yes. it is and it runs ok. just need to dial it in and work out the bugs.. its been down for 8 months and jusst dropped in a fresh rebuild 302... so it has a real mild mis and 2100 RPMs but i cant feel it if i hammer down. i only have 26 miles on motor right now. so the weak feeling may just be...
  13. cj99

    24s or 30s

    sound like it was lean (hotter) that means not enough fuel to much fuel and it would make the exhaust cooler not hotter
  14. cj99

    A couple questions for my dad

    the anti-freeze wont get into the motor by dripping on the outside..you intake,valve covers,etc have gaskets to keep water out oil in.but if your egr cooler is leaking water inside the housing it will be going into your intake..then in and out of you cylinders, no big deal but may cause your...
  15. cj99

    what fuel presure for 24lb injectors

    what fuel presure should i run.. i have a 86 block converted to MAF and e303 cam / heads / intake ,etc I put 24 lb injectors. it ran a little stronger on the bottom end with my 19 lb injectors in, but fuel presure was set at 42 ish. what should i set my 24's too ? i also have a 65 MM throttle...
  16. cj99

    need lower intake help

    dam hillbilly bikers always out smart us !!
  17. cj99

    need some to check my temp #'s

    ya , just idling... have not drove it yet. matter of fact it only has like 20 mins of run time total.
  18. cj99

    Went to Track Weds... Broke EVERYTHING

    what mods what mods did have done ? running 12's , not on a stock mustang
  19. cj99

    need some to check my temp #'s

    just checking :nice: no there not C there F. just got the motor running and I have a broke wire that I am trying to trace down under the engine...did not know if it was a o2 sensor and wanted to make sure she was not running lean (hotter than normal). have not drove care yet just ran it a few...
  20. cj99

    need some to check my temp #'s

    Fresh rebuilt 1986 (302/307 after bore) 0 miles and about 20 mins runs time on motor check profile at bottom of post for other info Temp Test one Mustang 9-1-06 Outside temp : 115/112 Intake temp before run : 110 Intake temp after run : 117 Exhaust temp before run (ds) 108 (ps) 107...
Top Bottom
Back
Forums
Menu