Search results

  1. jerry S

    Show me your custom steering wheel . . .

    You can order a dished mustang wheel from Moto-Lita. they will also do a custom job. Moto-Lita, the Classic British Steering Wheel
  2. jerry S

    Drag racing issues

    How much more performance do you think to get out of a 216 hp / 269 tq engine with a 3.25 gearing and a LSD? What kind of tranny do you have? what kind of axels to you have? If you get slicks and your drive line ain't up to snuff, you just might risk breaking **** when you hook up.
  3. jerry S

    67 Mustang w/ 302 & AOD. Which LT Headers?

    try fordpowertrain.com they can make something that fits your specific application. I went through a pair of coated hookers and hedmans and nothing really fit but the FPAs I got fit just fine. 3rd time is the charm.
  4. jerry S

    Drop-base air cleaner

    I just realized you have a 67 whereas I have a 69. I don't know if that makes a difference in terms of the hoods.
  5. jerry S

    Drop-base air cleaner

    I have a 351W with an Air Gap, which means it sits even higher than what you got. I have a 3" tall K&N 14" diameter, 1.250" drop base air filter that "just" fits under the hood. Here is what I got. http://www.summitracing.com/parts/KNN-66-3040/
  6. jerry S

    Exhaust

    X pipe. http://forums.stangnet.com/689413-x-pipe-h-pipe.html
  7. jerry S

    dumb question but where do I place a floor jack

    The whole front end was my question. I understood from what I was being told by most here that I needed to lift the front end off the ground by jacking one side of the car, inserting a jack stand, and then moving to the other side.
  8. jerry S

    dumb question but where do I place a floor jack

    If he is referring to the transmission cross member, then this is the same advice I once got from Global West.
  9. jerry S

    Good bye and thanks a lot

    welcome back glad you got reunited with your pony.
  10. jerry S

    dumb question but where do I place a floor jack

    That is why I asked about the original jacks. I recall my parents having a 1974 lesaber and a Merc. Marquis and the tire jack for one or the other or both lifted the front and back ends at a slot in the bumper. My bumpers are out for re-chroming so I could not look at them to see if they had...
  11. jerry S

    dumb question but where do I place a floor jack

    to lift my front end off the ground? Did the original jacks lift from the bumper or behind the wheels?
  12. jerry S

    COOL RESTOMOD CUSTOM 66

    Sweet Very nice. I guess you finally got the US mags to take a look at your work. I recall you posting here a while back that they were not interested in featuring your car but it seems they have changed their minds on the matter.
  13. jerry S

    1969 Mustang export brace follow up questions

    Thanks to everyone for your input. I guess I will just have the bar be made to fit the car and be happy with it.
  14. jerry S

    1969 Mustang export brace follow up questions

    After you got the export brace to fit, did you have any trouble with the sheet metal lining up or the door closing? My mechanic thinks that the new torque boxes and subframes will prevent any movement but Doug at GW says no, that these do nothing to affect the front clip.
  15. jerry S

    1969 Mustang export brace follow up questions

    How do I use a Port-A-Power to bring the shock towers forward by 1 inch? I know how they are used to spread the towers farther apart but how do they bring a tower that has sagged back towards the firewall (as opposed to sagging in towards the other shock tower)? As for the sub frames and...
  16. jerry S

    1969 Mustang export brace follow up questions

    I have new torque boxes, Global West subframe connectors and jacking rails. The mechanic says that this has made the frame so stiff that it won't move. I am of the opinion that these add-ons parts will not affect the stiffness of the front clip. Doug at GW confirmed this to me. In any...
  17. jerry S

    1969 Mustang export brace follow up questions

    This is a follow-up to an earlier post. I was at the mechanic today. My global west tubular steel export brace does not fit on the driver's side by about one inch. The shock tower has sagged backwards towards the windshield and the brace extends forward of the holes by one inch. The mechanic...
  18. jerry S

    Stereo installed -- w/pix!

    Nice work.
  19. jerry S

    Export brace blues

    My mechanic followed the instructions in this how to Mustang & Fords - Press - How To: Install an Export Brace and a Monte Carlo Bar 02/2005
  20. jerry S

    C6 Transmission for dragracing

    Hoi Freek. I too am in the NL with a C6 behind my mustang. I got a 500 hp kit from broaderperformance.com and can recommend them.
Top Bottom
Back
Forums
Menu