Search results

  1. bryce93lx

    kinda new to stangnet:

    welcome to town buddy, nice car what rims are those??, I was young and happy once i came to this place looking for info, and alas i stumbled into the talk section, and now here i am spouting babble with the best of them, click the link under my name and you will see what i had to do after i got...
  2. bryce93lx

    Hurry Bid Now.....1979 FORD MUSTANG PACE CAR..TURBO..4 SPD..ORGINAL..N/R

    sweet, nine minutes left someone should get it, i would if i wasn't 4,000 miles away and broke, but other than that it's mine :lol:
  3. bryce93lx

    Overdrive to Drive?

    Overdive to drive to prob it's drive to od you have to be careful with the overdrive band in the aod is WEAK, do not let it shift into od unless you are crusing at relativly the same speed for a long time and need it for mileage, and i try not to let my tranny shift in od on it's own ever, only...
  4. bryce93lx

    my pics of my car

    clean like the stripe ,the only color of car that can really pull of dee porno int is a white one, and i am lovin the machine finish cobra's, sweet ride dude, is she a stocker, or have you done stuff to it post up your mods
  5. bryce93lx

    Global West Subframes WOW!

    Jason, Subs cost 180 install 160, best bang for your buck mod on a fox better than gears, i noticed a little difference when i put the coil over on, then when i finally got my subs two weeks later it was a whole new world they are that good
  6. bryce93lx

    help with e.g.r. valve.

    there it be, not sure they have a screen but the little flapper will quite workin, not sure if it will cause to much crankcase pressure, it is vented through the pcv valve not the egr, someone will have better info
  7. bryce93lx

    30# Injectors to Large, Right?

    umm don't go back to the stock mass air thou it will choke the hell outta those heads, but i think 19's will work great, i called trick flow becuase i was gonna get one of their kits and they said with h/c/i, 24 were a must, so i bought some, and now with my setup the 24 makes it rich, imagine...
  8. bryce93lx

    5.0 explorer

    front covers need to be swapped, but the cool part of a exploder motor is the heads and intake get that to!!!!, they are gt-40's just like the 93' cobra
  9. bryce93lx

    One Piece 87-93 Headlights

    step one: remove one piece headlights Step Two: run Them over with lage piece of machinery( d8 cat works well) Step three: burn the broken pieces Step four : Piss on the ashes(melted wad of plastic) Step five : install three piece headlights Step six: adjust with the proper end wrench with...
  10. bryce93lx

    5 Speed Swap

    don't listen to newbie's(not you jason) the swap is hard if you are not mechanicaly inclined and don't have a full set of tools, otherwise it does not seem that bad(have not done it but will this winter, and have looked over many write up's on it), just google search and search on here and you...
  11. bryce93lx

    Building a 331 or 347

    here's the deal there are a million and one 347 kits out there and a few guys said that the pistion to rod ratio of the 347 in inferior to that of a 331 and thus making the 331 a better option, but i have heard from a source(my engine builder) that i trust that that is all hogwash, i am sure...
  12. bryce93lx

    tire and wheel combo???

    i have 245/45 all the way around and the front rubs like a bastard,and not at all in the back(yet another reason not to go hog hunting, it might rub with big girls in the back) of course my car is very low, i have coil overs so not sure how far but at least 2" in the front and 1.75" in the back...
  13. bryce93lx

    weird idle???

    ummm your sig, does not say if you have a cam or not but in my hatch with a e303 it will die every once in a while for what ever reason, seems to me the combo of the auto and the cam just cause it to die but other than that it runs great, does it mostly when it is cold of cranky in general
  14. bryce93lx

    '05 gt bullitts

    yeah i was bumed about this too, the whole reson i wanted to get the take off's is the p-zero's and the bullit. but if you can only use the wheel's what's the point, they look the same as the bullit's that are made for a car almost identical to ours, to much work, to little gain imho
  15. bryce93lx

    Rear Suspension Question

    even is they are not broken put new shocks on will make a huge difference, and if you really want it to handle good get the maximum motorsports coil over kit you will never regret it for a second, makes it a whole new car, subframes connectors are also a must
  16. bryce93lx

    Aftermarket MAF

    the aftermarket maf is good 73 or 76 is a good size, but a 65mm throttle body would help things even more
  17. bryce93lx

    what dose it take to get this cluster in my pony?

    if you want a four eye with the newer int it is mush easier to swap the nose of a 87-plus car, than screw with a older one's insides, maf 5.0 ftw!!! anyway
  18. bryce93lx

    Tuned In ( i need lawyer advice) way off topic

    tell me about it you have to talk to apu for like a hour to acomplish anything even to get the simplest replacment part, i have bought my last dell that is for sure
  19. bryce93lx

    I just bought a 4 eye

    yeah dude i would be careful, best bet would be to go get a 88 to 91 motor with lower miles and sling it in there, better yet find a whole wrecked car and upgrade the interior to 87 and up specs looks much better imho, but it looks like the stance is good and the body is straight, clean that...
  20. bryce93lx

    stang is getting boring..

    Do a coil over conversion, puttin vette's to shame in the twisties never gets old, have even left a bemmer z-3 or two in the dust, maximum mortorsports ftw
View older results
Top Bottom
Back
Forums
Menu