Search results

  1. ChromdOutDubs

    Longtubes Finally Installed - Video

    The reason im using the 2-step is so i know that im leaving at the same RPM everytime. Also I can tune the launch better to what the cars doing, sometimes you want to launch the car at a lower rpm then you stall at to shock the suspension to help it hook better. Actually i think most everyone...
  2. ChromdOutDubs

    Recent Pics and Video

    Thanks for all the kinda words. The thing left hard before, it was only launching at 3900 RPM, now ill be at 4400 RPM's. The new stall is around 4500 tight, built for the nitrous. If it hooks she is going to be fast. A few weeks ago i went to the track, had tons of problems. Mainly my c6 lost...
  3. ChromdOutDubs

    Recent Pics and Video

    I put it on a Dyno a long time ago, this was before all the engine changes, but then it put down a sad 350hp/320tq. That same day my trans blew up at the track. I guess that reading could be right, but i highly doubt that my 408 was putting down only 320 tq lol. I'm thinking the tranny was going...
  4. ChromdOutDubs

    Recent Pics and Video

    408w, AFR 205's, Vic Jr Intake, 690/670 cam motion, quickfuel 750cfm, forged internals, hooker super comp's 2" primaries. Thanks 2JZ I think? -AJ
  5. ChromdOutDubs

    Recent Pics and Video

    Here are some pictures and video of my car before some test runs i did for the transbrake. Solenoid is sticking so im going to have to figure that out before it hits the track this week. YouTube - 408w Messing Around Transbrake YouTube - 408w Messing Around Transbrake -AJ
  6. ChromdOutDubs

    Longtubes Finally Installed - Video

    If i make it in the tens, it will be one of the coolest things ever. Iv been waiting so long to make a good pass in this thing, and it seems stuff just keeps going wrong. Tens have been my goal since i built the car and iv yet to accomplish that. Iv been soooooo close 11.20 is real damn close...
  7. ChromdOutDubs

    Longtubes Finally Installed - Video

    I think im going to go this Wednesday and maybe even Friday. Not real sure yet, i have to see whats going on at work and what time i get out before i know if i can make it or not. Id be happy to make a 12 second pass without breaking anything, seems like everytime i make an 11 second pass my...
  8. ChromdOutDubs

    front coilover lbs

    Yes 110# is LBS. I have a Tubular D&D Motorsports K-Member with Tubular A-Arms, Strange 10 Way Adjustable Struts, Strange Coilover Kit, QA1 110# Springs, '96 GT Spindles, Rotors, and Calipers. -AJ
  9. ChromdOutDubs

    front coilover lbs

    Sounds like your car is going to pretty light. Very similar to mine, i dont have Fiberglass fenders but most everything you listed is pretty close. I went through 3 different springs packages on mine before i found what worked best. Its a racecar, your going to have to do some tuning on it. My...
  10. ChromdOutDubs

    front coilover lbs

    Check you PM i just linked you to Strange Struts and the Lakewoods 90/10's
  11. ChromdOutDubs

    Idle/Rev Clips Post 'em Up!

    Here ya go, all done ready for the track once again... Sounds mean YouTube - 408w Ford Mustang Idle and Rev AJ
  12. ChromdOutDubs

    front coilover lbs

    Im running a #110 QA1 spring on my drag car. My car only weighs #2700 so that could change a lot between mine and yours. -AJ
  13. ChromdOutDubs

    Longtubes Finally Installed - Video

    I was think of just running some bullets with the turn downs or something, not real sure yet. It will be going to the track how it sits right now. Anyone notice the new front tires and wheels?
  14. ChromdOutDubs

    Longtubes Finally Installed - Video

    That's my buddy Steve, he was with me up in Moultrie. Thanks for all the compliments guys, maybe all this hard work will pay off at the track soon. I'm waiting for my MSD RPM Module to get here so i can adjust my 2-Step a little bit better then before. It should be at the track next...
  15. ChromdOutDubs

    Longtubes Finally Installed - Video

    Well i finally got the longtubes squeezed into the car.It was one of the longest and most difficult installs iv done, but I'm glad their done now. Here a clip of it running after we installed them. After this video we found the carb wasn't bolted down all the way causing a intake leak, and that...
  16. ChromdOutDubs

    c6 to c4 swap

    I just did this swap last week. The only thing i had to do was get my drive shaft lengthened and i had to modify my trans cross member a bit. Basically its just unbolt and bolt the new one up, and modify your support. -AJ
  17. ChromdOutDubs

    Engine rebuild

    He ran 11's on that combo?
  18. ChromdOutDubs

    Longtubes SUCK

    Yeah... He is putting some twisted wedge 185's on it. He also put x303 cam in it. He took the AOD out and is still deciding on a C4 or T5.
  19. ChromdOutDubs

    Longtubes SUCK

    The countersunk holes where the flatheads sits, if the head of the bolt sits below the plates it will leak even if the gasket is there. That's why they said to use the red stuff to fill the areas where the bolts sit below....
  20. ChromdOutDubs

    Longtubes SUCK

    Thanks for the info, i had no idea the FR shaft what so crappy. Ill deffianlty be buying the MM Shaft instead. I had shorties on it, but 1-5/8 shorties and a 410W dont mix well, way to small. Yeah the fan does need to hit the trash, i haven't really been wanting to spend the money on an...
Top Bottom
Back
Forums
Menu