Search results

  1. L

    Parts store waterpump ok?

    i have an autozone pump and its working great for me. it was $35 and has a life time replacement warrenty
  2. L

    Putting a Stop to Oil Consumption through the PCV Valve

    i empty it every 2-3 weeks
  3. L

    BHP vs. HP

    usually you hear fwhp-fly wheel horse power and rwhp-rear wheel horse power. fwhp is the hp that the motor makes at the crank. rwhp is the hp that actually makes it to the wheels. there is a difference because the drive train (trans, diff, axles,etc) steal hp through heat and friction so the...
  4. L

    Putting a Stop to Oil Consumption through the PCV Valve

    i just put an oil separator in between the intake manifold and the pcv about 3-4 weeks ago and i dont have a drop of oil in my intake. and i just made 6 pulls on the dyno (when blowby is at its worst) with no oil getting into the manifold.
  5. L

    going to the dyno friday.....

    i just got off the phone with afm ordering a new maf. everyone is out of stock but afm says they should be getting about 70 on monday so hopefully mine will ship out soon after only cause of a technicallity lol the car has plenty more in it just from getting the right afr. should be even...
  6. L

    going to the dyno friday.....

    http://putfile.com/pic.php?pic=5/13818033986.jpg&s=f5 the numbers as you can see are 407rwhp and 417rwtq. picked up 4hp and 17tq. but as you can see the afr is way off and the hp numbers shows something screwy happening at 5000rpms but because the afr was off the chart we dont know what...
  7. L

    Blower street motor question

    a 347 with a turbo can make 1000hp if you want to run on high boost. 600hp youll need a different block no matter what size motor to be safe but i believe a stock 351w block can hold 650hp. id do the 351w and run a turbo on it and youll hit 600rwhp really easy but if you realy want to run a...
  8. L

    No kidding/I told you so...

    maybe the tuner (if it is tuned) didnt know what he was doing......
  9. L

    Blowers and carb's

    go turbo!:flag:
  10. L

    people with ford ps relocation kit...

    thanks for the pics you guys, looks like it will be plenty high to work. one more question though, does the bracket use all three of the holes on the driver's side head? or just two? i have a torque link http://www.koolpages.com/potatohell/enginelink.jpg that sits behind the a/c bracket...
  11. L

    people with ford ps relocation kit...

    i was wondering if you can post a picture of where the ford a/c delete, ps pump relocation kit mounts the ps (i.e. how high up?) im asking because i want to delete my a/c but because of my sc the smog pump is the highest pulley on the passenger side and if i dont have a pulley where the a/c...
  12. L

    going to the dyno friday.....

    the methanol sprays when under boost. the more psi your pushing, the more methanol it injects and as soon as you let off the gas it stops flowing. i dont boost a whole lot on the street so im not real concerned with having a non-methanol tune but ill probably make one some where down the...
  13. L

    going to the dyno friday.....

    im my tuner lol. i have a pms, im just using the dyno to dial in my tune since its safer then flooring it on the freeway and ill be able to dial in timing easier. that way i can see at what point adding more timing stops being beneficial so that i run the minimum timing needed plan to start...
  14. L

    going to the dyno friday.....

    i think curse is going to be near dead on. ive dynoed 403rwhp before the power pipe, methanol and edge racing converter with an afr of 10.5:1
  15. L

    going to the dyno friday.....

    i went with the 58cc because at the time, i had no intentions on getting a sc. afr says that would give me a ~9.6:1 but with the thicker header gasket im running its probably 9.5:1 max so i dont think the compression is bad...besides, thats what methanol is for:nice:
  16. L

    going to the dyno friday.....

    set an 12 noon apointment for friday at the dyno tuner. lets see who is the best at estimating hp by looking at a list of mods. its a dynojet thats only a couple months old. my mods are as follows: 302c.i. K&N air filter Pro-m 80mm MAF sensor Professional Products 70mm throutle body...
  17. L

    Suspension Question

    you can use the jack for the rear but youll need a compressor for the front
  18. L

    Using thicker head gasket to lower compression?

    i have 58cc chamber heads and run a 9psi pulley on my vortech with a power pipe (~11psi) so youll be fine
  19. L

    C&L sample tube ?

    thats not true. back when i used a c&l the tube that came in mine was colored for 19#, then when i got a 24# tube that was colored. then when i bought 42# injectors i got a pro-m
  20. L

    nitrous not working...95 GT 5.0, dry kit..help??

    if your running a 100 shot and cant feel anything, you arent spraying. check to see if its wired right
Top Bottom
Back
Forums
Menu