Search results

  1. funkytrunk92

    a/m 93 Cobra Wheel Backspacing

    I know I've seen a thread/webpage regarding the backspacing issues with a/m 93 cobra wheels on a 93 cobra and how to resolve it, but can't seem to find it by searching. Could someone please direct me to the correct place. I have 17 in a/m Saleen Knockoffs on my 93 cobra and would like...
  2. funkytrunk92

    LOW LOW #s on compresion test!! HELP!!

    That's the crazy part, FastDriver, I went through 2 different guages, left throttle body open and turned the engine over MANY times just to make sure. All cylinders would never go over 40ish. The first thing I did was replace PCV valve and screen to no avail. Thanks fidstang for the...
  3. funkytrunk92

    LOW LOW #s on compresion test!! HELP!!

    I'm pulling it...I agree with fidstang that knowing your motor is priceless. So, out she comes. The car ran great, I even drove it 130 miles home when I bought it...it has 163,000 miles on it, it is probably time. It just leaks oil and blows smoke when you get on it. thanks for your help guys...
  4. funkytrunk92

    LOW LOW #s on compresion test!! HELP!!

    beginning to pull motor as we speak... (1) i know u can have water in your oil, but can u get oil in your coolant in the radiator?????? (2) why are numbers so low (the 40s)????
  5. funkytrunk92

    LOW LOW #s on compresion test!! HELP!!

    Leaking from everywhere! just kidding...rear main seal (most likely), oil pan (unsure)...when i removed the cap on the oil filler you can feel blow by coming out (ALOT more than normal)...also, discovered valve covers loose (i've only owned it a week) which has been source of much oil :(...
  6. funkytrunk92

    LOW LOW #s on compresion test!! HELP!!

    1993 Cobra (had a week) leaks ALOT of oil...replaced pcv valve and screen and just did compression test. OK, I have done everything instructed in my manual as to how to perform a compression test. I have the car up to operating temperature. All cylinders are EXTREMELY LOW and two are dead...Here...
  7. funkytrunk92

    PCV Trouble.. Getting Oil In TB and Intake!!!

    yeah i was kind of afraid of that. A friend of mine that knows quite a bit about engines told me the same thing. I guess I was just hoping for some better news. Well, off I go to get a compression tester. Any tips on doing a leakdown test, apparently auto zone does not rent out leak test guages...
  8. funkytrunk92

    PCV Trouble.. Getting Oil In TB and Intake!!!

    one more thing,when i put my hand over the oil fller hole, it is blowing out, someone told me this might be sign of bad rings. Any thoughts
  9. funkytrunk92

    PCV Trouble.. Getting Oil In TB and Intake!!!

    ok................changed the pcv, changed the screen, all hoses in tact took for test drive...........car is still leaking from front somewhere and what appears to be rear main seal. here is my issue.... Do i go and get a mechanic to put it on a lift and have it inspected, if seals are...
  10. funkytrunk92

    PCV Trouble.. Getting Oil In TB and Intake!!!

    i'm askin:D --- still wondering if the smog pump removal and some of the tb hoses that were involved being plugged have anything to do with excessive pressure. If so, how do I make it right. thanks
  11. funkytrunk92

    PCV Trouble.. Getting Oil In TB and Intake!!!

    i know i am coming in late in the game, but i have few questions if anyone still cares. 1. are most of you running with the smog/air pump bypassed 2. would this pcv problem cause the rear main seal to go or at least blow oil by a good sea. == I am on fox body no. 2 with mods , no smog...
  12. funkytrunk92

    Power seat problems

    Are the seats supposed to go up and down as well as forward and backward. If so mine does not go up and down. I would be curious as how to fix the motor also. scott 92 lx coupe
  13. funkytrunk92

    Door Trouble

    I have a 92 lx coupe and the door drivers door seems to be loose. When i say loose i mean that when i hit a bump, it is almost like the door is not shut all the way. Yes it is shut all the way, but it still makes a noise. Its like the latch isn't holding it tight enough. Its hard to explain, but...
  14. funkytrunk92

    Will it work

    Ok all of you mustang masterminds. I have bbk equal lentgh shorty headers, x pipe(2 1/2) and mack 2 1/2 mufflers. I want to put the stock h pipe back on and eventually stock headers back on. Will the stock h pipe work with the bbk headers and the 2 1/2 inch mufflers, I mean will it bolt up...
View older results
Top Bottom
Back
Forums
Menu